July 2006 - openSUSE Users - openSUSE Mailing Lists

Sorry SuSE: 9.1 is Waste of time and money!
by Terje J. Hanssen 17 May '24

17 May '24

I am sorry to conclude that my upgrade from SuSE 9.0 Pro to 9.1 Pro has been waste of time and money for me, so far. The same I have to say about the free SuSE "Installation support". The reason is that my SuSE 9.1 installation only detects 1 of my 3 SCSCI devices (as I wrote in another subject on this forum: http://lists.suse.com/archive/suse-linux-e/2004-May/3254.html) Yamaha 4416S CDRW recorder detected HP DVD Writer 100i NOT detected Epson 1640SU scanner NOT detected It's rather stupid. I have installed 9.1 using the DVD disk just in the HP DVD drive, but after the installation of 9.1, the KDE/Konqueror /media/recorder cannot access it and YaST2 cannot install additional software from it. Only one "Cdrecorder" is found in My computer and that is the Yamaha 4416 drive, which the KDE/Konqueror file manager assign as /media/recorder11. I am sure 9.1 is the reason, as I hadn't this problems with 9.0. I have tried both an update and two several new installation of 9.1. Neither SJDS nor Windows on the same multiboot PC have problems to detect these devices. In my opinion SuSE should therefore debug 9.1 better and longer, and not leave the problems to the customers. I see SuSE notes on their web saying that they know SCSI scanners are not detected in 9.1. But regarding my HP DVD writer problem, the SuSE support (as usual) don't take the responsibility and argue that this problem (a combination of IDE disk and SCSI devices) isn't included in their free installation support! This sounds remarkable, and I have never had a modern PC of so simple model or configuration that it has fitted the limited rules for the free installation support. Terje J. Hanssen

17 29

[SLE] RealPlayer G2 on SuSe 6.2
by yh＠ottawa.com 03 Apr '24

03 Apr '24

Yesterday, I finally got sound going on my Linux setup. I downloaded RealPlayer G2 and it worked beautifully. Today, RealPlayer run but no sound coming out. All other sound functions still work. I can still play my CD, have system sound BUT no sound when I run RealPlayer. /var/log/message said kernel: Sound: DMA (output) timed out - IRQ/DRQ config error? but KDE sound still work. I have re-installed RealPlayer 3 times now, still no sound when I run the RealPlayer. Any help is appreciated. Ying yh(a)ottawa.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/

3 2

Creating a new user for a deamon
by Rowan Reid 15 Jan '24

15 Jan '24

I'm setting up a cron job for a analysis tool, I'm trying to use the SuSE tools where possible but YAST doent' allow you to create new user without a home I tried /dev/null is there a proper way to do this ? Rowan Reid Job Captain, Systems Administrator STUDIO 3 ARCHITECTS 909 982 1717

3 2

Web Site Standards
by Bryan Tyson 25 Sep '21

25 Sep '21

On Wednesday 03 July 2002 03:38, Michael wrote: > I tried to visit this site. > http://www.bet365.com > The result upset me so much i sent them this. I sent the letter below, and I encourage everyone on the list to send a similar letter. ----------------------------------------- Subject: Create a Real Web Site Please From: Bryan S. Tyson <bryantyson(a)earthlink.net> To: webmaster(a)bet365.com When attempting to view your site using Konqueror 2.2.1 and Mozilla 0.9.4, both Linux web browsers, I was curtly informed that my browser is "incompatible." Your site, sir, is what is "incompatible." Stick with established standards and real html, not Microsoft proprietary "features." *************************************************** Powered by SuSE Linux 7.3 Professional KDE 2.2.1 KMail 1.3.1 This is a Microsoft-free computer Bryan S. Tyson bryantyson(a)earthlink.net ***************************************************

10 9

Mount Windows NT(NTFS) drive as drive Z: for all users
by Keith Jacobs 25 Sep '21

25 Sep '21

We have an winNT server and need to auto mount a shared folder as if it were a windose mapped drive Z: on SuSE8 Could someone please explain how to do this and how to make sure it is set-up for every user everytime the system is booted. Thanks Regards Keith Jacobs New to Linux

3 2

Adding fonts?
by Tracer Bullet 22 Aug '16

22 Aug '16

Hi all, Reading some mails on the GIMP mail list, I ran across the procedure to install some more fonts for not only Gimp, but the system and StarOffice to use also. Well, I installed the fonts, went to the shell and issued the command xset fp+ <font directory> and then the rehash command and all fonts are there! Ok, that went well, but each time I restart the system, I have to do it all over again? Is there a way to make it permanent and read the new fonts like it does the ones the system installs or is that a no-no? end of line Tracer Shell commands: xset fp+ <new font directory> xset fp rehash -- ---KMail 1.2--- SuSE Linux v7.2--- Registered Linux User #225206 /tracerb(a)sprintmail.com/ *Magic Page Products* *Team Amiga* http://home.sprintmail.com/~tracerb

3 2

HP Laser 1020
by Alfredo Cole 08 May '10

08 May '10

Hi: I just bought this printer, thinking it would work right out of the box. I'm running SUSE 9.3 with CUPS, and it does not seem to support this model. Anybody got this printer to work? Any pointers would help. Best regards. -- Alfredo Cole-Tuckler

11 19

Problem with procmail
by Carlos E. R. 16 Jan '07

16 Jan '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I'm having a problem with some mails handled by one particular rule in procmail - all the rest are being handled ok. The .procmailrc goes like this: VERBOSE=on LOGFILE=$HOME/procmail.log ... cut :0 * ^Received: from correo.foo.es { :0 * ^Received: from (ruebert.ieee.org|engine.ieee.org|hormel3.ieee.org|boldfish.ieee.org|aries3.…) $HOME/Mail/in_ieee :0 * ^FROM_DAEMON $HOME/Mail/in_daemon :0 $HOME/Mail/in_foo } The problem is that mail matching the "^Received" clause above goes to the "/var/spool/mail/cer" folder instead of the "$HOME/Mail/in_foo" that corresponds. The log is this, showing a write error: procmail: No match on "^List-Id: <husky-discuss.lists.sourceforge.net>" procmail: Executing "/usr/bin/spamc" procmail: No match on "^X-Spam-Status: Yes" procmail: No match on "^^rom[ ]" procmail: No match on "^From.*FETCHMAIL-DAEMON(a)nimrodel.valinor" procmail: No match on "^To.*virusalert(a)nimrodel.valinor" procmail: No match on "^From.*(MAILER-DAEMON|postmaster)(a)nimrodel.valinor" ... procmail: Match on "^Received: from correo.foo.es" procmail: No match on "^Received: from (ruebert.ieee.org|engine.ieee.org|hormel3.ieee.org|boldfish.ieee.org|aries3.…)" procmail: No match on "(^(Mailing-List:|Precedence:.*(junk|bulk|list)|To: Multiple recipients of |(((Resent-)?(From|Sender)|X-Envelope-From):|>?From )([^>]*[^(.%@a-z0-9])?(Post(ma?(st(e?r)?|n)|office)|(send)?Mail(er)?|daemon|m(mdf|ajordomo)|n?uucp|LIST(SERV|proc)|NETSERV|o(wner|ps)|r(e(quest|sponse)|oot)|b(ounce|bs\.smtp)|echo|mirror|s(erv(ices?|er)|mtp(error)?|ystem)|A(dmin(istrator)?|MMGR|utoanswer))(([^).!:a-z0-9][-_a-z0-9]*)?[%@> ][^<)]*($.*$.*)?)?$([^>]|$)))" procmail: Assigning "LASTFOLDER=/home/cer/Mail/in_foo" procmail: Opening "/home/cer/Mail/in_foo" procmail: Acquiring kernel-lock So far, normal. procmail: Error while writing to "/home/cer/Mail/in_foo" procmail: Truncated file to former size A write error. What write error? procmail: No match on "^Received: from pop.tiscali.es" procmail: Extraneous locallockfile ignored .... procmail: Bypassed locking "/var/spool/mail/cer.lock" procmail: Assigning "LASTFOLDER=/var/spool/mail/cer" procmail: Opening "/var/spool/mail/cer" procmail: Acquiring kernel-lock procmail: Notified comsat: "cer@0:/var/spool/mail/cer" >From sombody(a)somewhere.com Wed Aug 31 20:17:13 2005 Subject: Final.... Folder: /var/spool/mail/cer 952289 I have copied over the emails in /home/cer/Mail/in_foo to another folder, then deleted, recreated in_foo, and finally copied back all the emails. The folder has 57Mb (392 emails) and Pine seems happy with it, no complaints. Ideas? - -- Cheers, Carlos Robinson -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFDFflQtTMYHG2NR9URAuBbAJ96DTk33WG7nb+BfwkIB40MTql0qgCffUW8 i7c5FLtIHFDl86hb4moJhu8= =k4MY -----END PGP SIGNATURE-----

5 16

SUSE9.3 - SUSE Plugger problem with USB Serial port cable
by Bruce Samhaber 05 Dec '06

05 Dec '06

Hi, I am using a USB to Serial port cable. Initially when I start the computer and linux then insert the USB Serial port cable the device is set as /dev/ttyUSB0. If the USB Serial Port cable is removed then reinserted it becomes /dev/ttyUSB1. Each time the USB Port cable is removed then reinserted the device name is increased by one. It appears to me that upon removeal of the device that SUSE Plugger is no removeing the device from the device list. Has anyone seen this problem? Does anyone have any suggestions to fix this? Thanks, -- Bruce Samhaber Senior Hardware Design Consultant Tel: 613-724-5987 112 Kenora St. Fax: 613-724-5987 Ottawa, Ontario Cel: 613-297-6961 K1Y 3L1 mailto: bsamhaber(a)sympatico.ca http://www3.sympatico.ca/marypat/

1 2

[SLE] Suse 10 Root nearly full
by Carl William Spitzer IV 11 Oct '06

11 Oct '06

Why is root full?? All I have done is periodic online updates when I installed only about 7gig was taken up. linux:/home/cwsiv # df -h Filesystem Size Used Avail Use% Mounted on /dev/hda5 14G 12G 1.5G 90% / tmpfs 220M 12K 220M 1% /dev/shm /dev/hda3 25G 24G 1.9G 93% /Storage0 /dev/hda4 20G 15G 4.9G 75% /Storage1 /dev/hda1 61M 11M 48M 18% /boot /dev/hda7 16G 15G 920M 95% /home linux:/home/cwsiv # ls / . boot home media proc srv subdomain usr .. dev lib mnt root Storage0 sys var bin etc lost+found opt sbin Storage1 tmp Win32 linux:/home/cwsiv # du -sh /boot 6.3M /boot linux:/home/cwsiv # du -sh /proc/ 450M /proc/ linux:/home/cwsiv # du -sh /srv 1.4M /srv linux:/home/cwsiv # du -sh /subdomain/ 4.0K /subdomain/ linux:/home/cwsiv # du -sh /usr 3.3G /usr linux:/home/cwsiv # du -sh /dev 152K /dev linux:/home/cwsiv # du -sh /lib 92M /lib linux:/home/cwsiv # du -sh /mnt 4.0K /mnt linux:/home/cwsiv # du -sh /root 3.6M /root linux:/home/cwsiv # du -sh /sys 0 /sys linux:/home/cwsiv # du -sh /var 607M /var linux:/home/cwsiv # du -sh /bin 6.5M /bin linux:/home/cwsiv # du -sh /etc 66M /etc linux:/home/cwsiv # du -sh /lost+found/ 16K /lost+found/ linux:/home/cwsiv # du -sh /opt/ 2.1G /opt/ linux:/home/cwsiv # du -sh /sbin/ 11M /sbin/ linux:/home/cwsiv # du -sh /tmp/ 1.4G /tmp/ linux:/home/cwsiv # du -sh /Win32/ 4.2G /Win32/ linux:/home/cwsiv # -- ___ _ _ _ ____ _ _ _ | | | | [__ | | | |___ |_|_| ___] | \/ -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq(a)suse.com

12 23