Hallo hier ist ein Auszug von dmesg. Der Rechner schmiert alle 2 Stunden ab. Warum glaubt er ein SMP zu sein ? Ich bin mir sicher ich hab den 2.4.4 von SuSE 7.2 installiert und keinen mit SMP Support? Rechner ist ein COMPAQ Deskpro EXMP1 und was nun? Grüße Torsten Linux version 2.4.4-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Wed May 16 00:37 :55 GMT 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007fd0000 (usable) BIOS-e820: 0000000007fd0000 - 0000000007ff0000 (ACPI NVS) BIOS-e820: 0000000007ff0000 - 0000000008000000 (usable) BIOS-e820: 00000000feea0000 - 0000000100000000 (reserved) Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at 000f8da0 hm, page 000f8000 reserved twice. hm, page 000f9000 reserved twice. hm, page 000e9000 reserved twice. hm, page 000ea000 reserved twice. On node 0 totalpages: 32768 zone(0): 4096 pages. zone(1): 28672 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: COMPAQ Product ID: Deskpro APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 16 Floating point unit present. Machine Exception supported. 64 bit compare & exchange supported. Internal APIC present. SEP present. MTRR present. PGE present. MCA present. CMOV present. PAT present. PSE present. MMX present. FXSR present. XMM present. Bootup CPU Bus #0 is PCI Bus #1 is PCI Bus #2 is PCI Bus #9 is ISA I/O APIC #8 Version 17 at 0xFEC00000. Int: type 0, pol 3, trig 3, bus 0, IRQ 08, APIC ID 8, APIC INT 10 Int: type 0, pol 3, trig 3, bus 0, IRQ 09, APIC ID 8, APIC INT 11 Int: type 0, pol 3, trig 3, bus 0, IRQ 7c, APIC ID 8, APIC INT 10 Int: type 0, pol 3, trig 3, bus 0, IRQ 7d, APIC ID 8, APIC INT 11 Int: type 0, pol 3, trig 3, bus 0, IRQ 7e, APIC ID 8, APIC INT 12 Int: type 0, pol 3, trig 3, bus 0, IRQ 7f, APIC ID 8, APIC INT 13 Int: type 0, pol 3, trig 3, bus 1, IRQ 00, APIC ID 8, APIC INT 12 Int: type 0, pol 3, trig 3, bus 1, IRQ 01, APIC ID 8, APIC INT 13 Int: type 0, pol 3, trig 3, bus 2, IRQ 20, APIC ID 8, APIC INT 10 Int: type 0, pol 3, trig 3, bus 2, IRQ 21, APIC ID 8, APIC INT 11 Int: type 0, pol 3, trig 3, bus 2, IRQ 22, APIC ID 8, APIC INT 12 Int: type 0, pol 3, trig 3, bus 2, IRQ 23, APIC ID 8, APIC INT 13 Int: type 0, pol 3, trig 3, bus 2, IRQ 10, APIC ID 8, APIC INT 12 Int: type 0, pol 3, trig 3, bus 2, IRQ 24, APIC ID 8, APIC INT 11 Int: type 0, pol 3, trig 3, bus 2, IRQ 25, APIC ID 8, APIC INT 12 Int: type 0, pol 3, trig 3, bus 2, IRQ 26, APIC ID 8, APIC INT 13 Int: type 0, pol 3, trig 3, bus 2, IRQ 27, APIC ID 8, APIC INT 10 Int: type 0, pol 3, trig 3, bus 2, IRQ 28, APIC ID 8, APIC INT 12 Int: type 0, pol 3, trig 3, bus 2, IRQ 29, APIC ID 8, APIC INT 13 Int: type 0, pol 3, trig 3, bus 2, IRQ 2a, APIC ID 8, APIC INT 10 Int: type 0, pol 3, trig 3, bus 2, IRQ 2b, APIC ID 8, APIC INT 11 Int: type 0, pol 3, trig 3, bus 2, IRQ 2c, APIC ID 8, APIC INT 13 Int: type 0, pol 3, trig 3, bus 2, IRQ 2d, APIC ID 8, APIC INT 10 Int: type 0, pol 3, trig 3, bus 2, IRQ 2e, APIC ID 8, APIC INT 11 Int: type 0, pol 3, trig 3, bus 2, IRQ 2f, APIC ID 8, APIC INT 12 Int: type 0, pol 3, trig 3, bus 2, IRQ 34, APIC ID 8, APIC INT 11 Int: type 0, pol 3, trig 3, bus 2, IRQ 35, APIC ID 8, APIC INT 12 Int: type 0, pol 3, trig 3, bus 2, IRQ 36, APIC ID 8, APIC INT 13 Int: type 0, pol 3, trig 3, bus 2, IRQ 37, APIC ID 8, APIC INT 10 Int: type 0, pol 0, trig 0, bus 9, IRQ 01, APIC ID 8, APIC INT 01 Int: type 0, pol 0, trig 0, bus 9, IRQ 03, APIC ID 8, APIC INT 03 Int: type 0, pol 0, trig 0, bus 9, IRQ 04, APIC ID 8, APIC INT 04 Int: type 0, pol 0, trig 0, bus 9, IRQ 05, APIC ID 8, APIC INT 05 Int: type 0, pol 0, trig 0, bus 9, IRQ 06, APIC ID 8, APIC INT 06 Int: type 0, pol 0, trig 0, bus 9, IRQ 07, APIC ID 8, APIC INT 07 Int: type 0, pol 0, trig 0, bus 9, IRQ 08, APIC ID 8, APIC INT 08 Int: type 0, pol 0, trig 0, bus 9, IRQ 09, APIC ID 8, APIC INT 09 Int: type 0, pol 0, trig 0, bus 9, IRQ 0c, APIC ID 8, APIC INT 0c Int: type 0, pol 0, trig 0, bus 9, IRQ 0d, APIC ID 8, APIC INT 0d Int: type 0, pol 0, trig 0, bus 9, IRQ 0e, APIC ID 8, APIC INT 0e Int: type 0, pol 0, trig 0, bus 9, IRQ 0f, APIC ID 8, APIC INT 0f Lint: type 1, pol 0, trig 0, bus 9, IRQ 00, APIC ID ff, APIC LINT 01 Processors: 1 mapped APIC to ffffe000 (fee00000) mapped IOAPIC to ffffd000 (fec00000) Kernel command line: auto BOOT_IMAGE=linux ro root=304 BOOT_FILE=/boot/vmlinuz Initializing CPU#0 Detected 996.784 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1985.74 BogoMIPS Memory: 125300k/131072k available (1225k kernel code, 5256k reserved, 933k data, 112k init, 0k highmem) Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) VFS: Diskquotas version dquot_6.5.0 initialized CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU: Intel Pentium III (Coppermine) stepping 0a Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs ...changing IO-APIC physical APIC ID to 8 ... ok. Synchronizing Arb IDs. init IO_APIC IRQs IO-APIC (apicid-pin) 8-0, 8-2, 8-10, 8-11, 8-20, 8-21, 8-22, 8-23 not connected. ..TIMER: vector=49 pin1=-1 pin2=-1 ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... works. number of MP IRQ sources: 41. number of IO-APIC #8 registers: 24. testing the IO APIC....................... IO APIC #8...... .... register #00: 08000000 ....... : physical APIC id: 08 .... register #01: 00170020 ....... : max redirection entries: 0017 ....... : IO APIC version: 0020 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... register #02: 08000000 ....... : arbitration: 08 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 0 0 0 0 1 1 71 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 001 01 0 0 0 0 0 1 1 79 0d 001 01 0 0 0 0 0 1 1 81 0e 001 01 0 0 0 0 0 1 1 89 0f 001 01 0 0 0 0 0 1 1 91 10 001 01 1 1 0 1 0 1 1 99 11 001 01 1 1 0 1 0 1 1 A1 12 001 01 1 1 0 1 0 1 1 A9 13 001 01 1 1 0 1 0 1 1 B1 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ1 -> 1 IRQ3 -> 3 IRQ4 -> 4 IRQ5 -> 5 IRQ6 -> 6 IRQ7 -> 7 IRQ8 -> 8 IRQ9 -> 9 IRQ12 -> 12 IRQ13 -> 13 IRQ14 -> 14 IRQ15 -> 15 IRQ16 -> 16 IRQ17 -> 17 IRQ18 -> 18 IRQ19 -> 19 .................................... done. calibrating APIC timer ... ..... CPU clock speed is 996.7530 MHz. ..... host bus clock speed is 132.9003 MHz. cpu: 0, clocks: 1329003, slice: 664501 CPU0T0:1328992,T1:664480,D:11,S:664501,C:1329003 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xe8316, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Using IRQ router default [8086/2410] at 00:1f.0 PCI->APIC IRQ transform: (B0,I31,P3) -> 19 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B1,I0,P0) -> 18 PCI->APIC IRQ transform: (B2,I8,P0) -> 16 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14) Starting kswapd v1.8 allocated 32 pages and 32 bhs reserved for the highmem bounces pty: 256 Unix98 ptys configured block: queued sectors max/low 83104kB/27701kB, 256 slots per queue RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev f9 PIIX4: chipset revision 2 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x2460-0x2467, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x2468-0x246f, BIOS settings: hdc:DMA, hdd:pio hda: Maxtor 32049H2, ATA DISK drive hdc: LTN485, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=2586/240/63 hdc: ATAPI 48X CD-ROM drive, 120kB Cache Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hda2 hda3 hda4 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK: Compressed image found at block 0 Uncompressing...................................done. Freeing initrd memory: 506k freed loop: loaded (max 8 devices) Serial driver version 5.05a (2001-03-20) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10d SCSI subsystem driver Revision: 1.00 request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 8192 bind 8192) Linux IP multicast router 0.06 plus PIM-SM IP-Config: No network devices available. NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem). fatfs: bogus cluster size fatfs: bogus cluster size reiserfs: checking transaction log (device 03:04) ... Warning, log replay starting on readonly filesystem reiserfs: replayed 20 transactions in 5 seconds Using r5 hash to sort names reiserfs: using 3.5.x disk format ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. change_root: old root has d_count=3 Trying to unmount old root ... okay Freeing unused kernel memory: 112k freed Adding Swap: 264592k swap-space (priority -1) 8139too Fast Ethernet driver 0.9.16 eth0: SMC1211TX EZCard 10/100 (RealTek RTL8139) at 0xc88fc000, 00:10:b5:f4:f3:b8, IRQ 16 eth0: Identified 8139 chip type 'RTL-8139C' eth0: Setting half-duplex based on auto-negotiated partner ability 0000. IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present eth0: no IPv6 routers present