Karl Zeiss schrieb:
in /etc/modules.conf steht folgendes: [...]> müsste ich da nicht noch die Möglichkeit haben tuner, sound, etc.. einzustellen? Hab mir das Video-TV Howto angeguck, verstehe aber die ganze Thematik mit dem Einbinden der Module nicht recht.
Hallo Karl! Welches HOWTO? (Link) Du glücklicher! Ich habe die gleiche Karte! Aber leider wurde für DVB-T unser Anschluss gekündigt -> Umstieg nötig. Haste du die Version mit Radio, dann schreibst du radio=1 statt radio=0 Schreib in /etc/modprobe.conf.local folgende Zeile: options bttv card=1 radio=0 tuner=0 In meiner /etc/modprobe.conf ist das alles, was zu char-major-81 auftaucht! alias char-major-81 videodev install char-major-81-0 bttv install char-major-81-1 /bin/true install char-major-81-2 /bin/true install char-major-81-3 /bin/true Wenn du das soweit geändert hast (root!): rmmod bttv dmesg -c modprobe bttv dmesg Nun müsste _etwa_ folgendes erscheinen, wenn nicht, poste es mal! bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5 bttv0: Bt848 (rev 18) at 0000:01:08.0, irq: 5, latency: 32, mmio: 0xe6000000 bttv0: using: MIRO PCTV [card=1,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00ff07ff [init] i2c-algo-bit.o: (0) scl=1, sda=1 i2c-algo-bit.o: (1) scl=1, sda=0 i2c-algo-bit.o: (2) scl=1, sda=1 i2c-algo-bit.o: (3) scl=0, sda=1 i2c-algo-bit.o: (4) scl=1, sda=1 i2c-algo-bit.o: bt848 #0 [sw] passed test. : chip found @ 0xc0 (bt848 #0 [sw]) : All bytes are equal. It is not a TEA5767 : chip found @ 0xc2 (bt848 #0 [sw]) bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: miro: id=1 tuner=0 radio=no stereo=no bttv0: using tuner=0 tuner 2-0060: type set to 0 (Temic PAL (4002 FH5)) bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found bttv0: registered device video0 bttv0: registered device vbi0 tuner 2-0061: tuner type not set Was die letzte Zeile soll..... Wenn du eine Lösung für diese Zeile hast, du kennst ja meine Mail-Adresse. Viel Erfolg