I use SuSE 7.0 (not 7.1 as yast offers by default) distribution to update eMail Server II. It works so far. - Alexey. _____ < http://members.home.com/asolofnenko/ > Alexey N. Solofnenko < http://www.inventigo.com/ Inventigo LLC Pleasant Hill, CA (GMT-8 usually) -----Original Message----- From: herman@knief.net [mailto:herman@knief.net] Sent: Friday, October 26, 2001 5:48 PM To: suse-security@suse.de Subject: Re: [suse-security] SuSE Security Announcement: kernel (SuSE-SA:2001:036) Are we to assume that we should use the kernel for the 7.0 distro tp update the eMail Server II product? Or will there be a separate update posted for it? - Herman Roman Drahtmueller wrote:
-----BEGIN PGP SIGNED MESSAGE-----
________________________________________________________________________ ______
SuSE Security Announcement
Package: kernel Announcement-ID: SuSE-SA:2001:036 Date: Friday, Oct 26th 2001 18:00 MEST Affected SuSE versions: 6.3, 6.4, 7.0, 7.1, 7.2, 7.3 Vulnerability Type: local privilege escalation Severity (1-10): 8 SuSE default package: yes Other affected systems: all Linux systems, all kernel versions
Content of this advisory: 1) security vulnerability resolved: kernel problem description, discussion, solution and upgrade
information
2) pending vulnerabilities, solutions, workarounds 3) standard appendix (further information)
________________________________________________________________________ ______
1) The Problem, Workaround, Recommended solution, Instructions,
Notes,
Verification
The Problem:
The SuSE Linux kernel is a standard kernel, enhanced with a set of additional drivers and other improvements, to suit the end-user's demand for a great variety of drivers for all kind of hardware.
Two security related problems have been found in both the 2.2 and 2.4 series kernels:
1) A recursive symlink structure can cause the kernel to consume
excessive
CPU time, causing the machine to halt for an arbitrary amount of
2) ptrace(2), the system call used to trace processes as done by
time. the
strace(1) command, must not be given permissions to trace setuid
or
setgid programs (processes with a different effective uid or gid
than
the caller's uid/gid). A race condition in the ptrace() kernel
code
was the reason for the kernel update in May 2001. The flaw fixed
with
this kernel update is based on the assumption that the calling
process
is allowed to trace a running process. The fix consists of
disallowing
a ptrace() system call for all setuid/setgid binaries,
regardless
of the capabilities of the calling process.
Bug 1) can lead to a local DoS. Bug 2) can allow a local attacker to gain root privileges.
Workarounds:
It is possible to work around bug 2) by removing the setuid bit
from the
programs newgrp, su, su1, sudo and possibly more programs in the
system
that will start another program with different pivileges. In order to completely solve the security problems, it is
recommended to
update the kernel to a newer version as described below.
Recommended solution:
We have provided update kernels for our supported distributions 6.3, 6.4, 7.0, 7.1, 7.2 and the freshly released 7.3. Currently, only kernel update packages for the Intel i386 distributions are available. The update should be performed with special care in
order
to make sure that the system will properly boot after the package update.
Step-By-Step Installation Instructions:
The kernel of a Linux system is the most critical component with
respect
to stability, reliability and security. By consequence, an update
of that
component requires some care and full attention to succeed. The following paragraphs will guide you through the installation process in a step-by-step fashion. The character sequence "****" marks the beginning of a new paragraph. In some cases, you decide if the paragraph is needed for you or not. Please read through all of the steps down to the end. All of the commands that need to be executed are required to be run as the superuser (root). Each step relies on the steps before to complete successfully.
**** Step 1: Determine the needed kernel version
SuSE-6.3, 6.4 and 7.0 are built for kernels of version 2.2, 7.1
and
up are also ready for a 2.4 kernel. You should use the same major
kernel
version for the update as you are using already.
Determine the kernel version that is running on your system with
the
command uname -r
If your running kernel is version 2.2.x, you should use a 2.2.19
kernel
to update, if you use a 2.4 series kernel, use a 2.4 kernel to
update
SuSE-7.3 users: See Step 3!). Cross-version updates _may_ work in your installation but are dis- recommended in order to preserve a properly running system.
**** Step 2: Determine the needed kernel type
After you have determined which version to install, you must
select the
type of kernel rpm package to install. There are four types
offered:
k_i386 a kernel that runs on i386 processors. k_smp the kernel for computers with more than one CPU k_psmp for dual Pentium-I processor computers k_deflt the default kernel for most systems, includes
support
for APM (laptops).
You can use the command rpm -qf `awk -F= '/image/{print $2}' < /etc/lilo.conf` to find the name of the kernel RPM package that is installed on your system. In the case of inconclusive results, pick one from
the
four choices above: k_deflt works on most systems, k_smp is for multi processor computers.
Step 1 and 2 will lead you to one of these possiblities:
2.2-default 2.2-smp 2.2-psmp 2.2-i386 2.4-default 2.4-smp 2.4-psmp 2.4-i386
**** Step 3: SuSE-7.3 special: Download
If you have a SuSE-7.3 system, continue to read this paragraph, otherwise jump to Step 4. SuSE Linux 7.3 comes with a kernel version 2.4.10. We have made a set of patched kernels of this particular version to seamlessly fit into a 7.3 installation. SuSE Linux releases before 7.3 should receive a 2.4.7 kernel update - we provide both versions for the
update.
It should be possible though to run both 2.4 kernels on all 2.4
based
systems.
Please download your kernel rpm from the location
ftp://ftp.suse.com/pub/suse/i386/update/7.3/kernel/2.4.10-20011026/
After downloading the rpm package, you might want to verify the authenticity of the rpm package according to Section 3 of this and
every
SuSE Security announcement. Then go to Step 5, omitting Step 4.
**** Step 4: Download your kernel rpm
Your kernel rpm package is available for download from
ftp://ftp.suse.com/pub/suse/i386/update/<dist>/kernel/
where <dist> is the release version of your distribution. If you need to download a 2.4 series kernel, enter the directory called 2.4.7-20011026/ and download the kernel rpm type that you have selected in Step 2. If you need to download a 2.2 series kernel, enter the directory called 2.2.19-20011026/ and download the kernel rpm type that you have selected in Step 2.
An example: For a SuSE-7.2 distribution installed on an SMP system that is running a 2.4 series kernel, you should download the
file
ftp://ftp.suse.com/pub/suse/i386/update/7.2/kernel/2.4.7-20011026/k_smp- 2.4.7-22.i386.rpm
After downloading the rpm package, you might want to verify the authenticity of the rpm package according to Section 3 of this SuSE Security announcement at the bottom of this message.
**** Step 5: SuSE-6.3 special: Installing your kernel rpm package
If you have a SuSE-6.3 system, continue to read this paragraph, otherwise jump to Step 6. In SuSE Linux version 6.3, the kernel and the kernel modules are packaged in two different packages. This will change with the
success
of this update: Both kernel images and kernel modules will be
contained
in the same package. For the update to succeed, you will have to
either
remove the existing kernel package from your system using the
command
rpm -e `rpm -qf /boot/vmlinuz` or two kernel rpm packages will be installed on your system.
**** Step 6: Installing your kernel rpm package
Install the rpm package that you have downloaded in Steps 3 or 4
with
the command rpm -Uhv --nodeps --force
where is the name of the rpm package that you
downloaded.
Notice: After performing this step, your system will likely not be able to boot if the following steps have not been fully
applied.
**** Step 7: aic7xxx
If you use an Adaptec aic7xxx SCSI host adapter, continue to read this paragraph, otherwise jump to Step 8. The new kernel comes with two versions for the Adaptec aic7xxx
driver.
If you have such a card, you should see the driver listed in the output from the command lsmod or you should see the adapter in the output of the command lspci The new driver is known to work reliably. However, if you
encounter
any problems with CDROM drives or other removeable devices (CD-RW drives, tapes, etc) after this kernel upgrade, then you should try
to
use the old driver which is called aic7xxx_old instead of aic7xxx. If you decide to make this change, then the steps 10 and 11 are mandatory for the update to succeed, regardless if you get back to this paragraph after your first reboot or not. To use the old driver, please use your favourite editor to edit the file /etc/rc.config. Change aic7xxx into aic7xxx_old at the
line
that starts with INITRD_MODULES. You should find it near the top
of the
file. Do not forget to save your changes. Then go to Steps 10 and
11.
If you want to use the new driver, then do not change anything.
**** Step 8: LVM
If you use LVM, then continue to read this paragraph, otherwise jump to Step 9. If you use LVM (Logical Volume Manager) in your installation of
SuSE
Linux before and including SuSE-7.1, then you need the updated lvm package from the /pub/suse/i386/update/<dist>/kernel/2.2.19-20011026/ directory for your distribution as well. The package contains the userspace utilities to manage the Logical Volume Manager driver. An update package is needed because the LVM data format/structure
on
disk has changed with the new version of the LVM kernel driver. Install the package as usual using the command rpm -Uhv lvm-0.9.1_beta4-12.i386.rpm Be sure you have downloaded the package for the explicit version of your SuSE Linux Installation. The package names are identical for all distribution versions.
With this kernel upgrade, the lvm driver is configured as a
module,
it is _not_ compiled into the kernel image any more. Therefore,
you
should use your favourite editor and edit /etc/rc.config. In this file, the variable INITRD_MODULES must contain the word "lvm-mod". Example: you have an NCR scsi hostadapter and use lvm and
reiserfs.
The line in /etc/rc.config should look like INITRD_MODULES="sym53c8xx lvm-mod" Be careful about the double quotes!
WARNING: After the first boot with the new kernel you will not be
able
to downgrade to older versions of LVM any more.
**** Step 9: reiserfs
If you use reiserfs, then continue to read this paragraph, otherwise jump to Step 10.
If you use reiserfs (find out via "grep reiserfs /proc/mounts"),
then
make sure that the variable INITRD_MODULES from /etc/rc.config
contains
the word "reiserfs", like in the example in Step 8.
**** Step 10: configuring and creating the initrd
Upon kernel boot (after lilo runs), the kernel needs to use the drivers for the device (disk/raid) where the root filesystem is located in order to access it for mounting. If this driver is not compiled into the kernel, it is supplied as a kernel module that must be loaded _before_ the root filesystem is mounted. This is done using a ramdisk that is loaded along with the kernel by
lilo
(which is subject to the next Step).
The modules that will be packed into this initial ramdisk (initrd) must be listed in the variable INITRD_MODULES in the file /etc/rc.config . This ramdisk, called "initrd", must be generated using the command mk_initrd If the driver for the device containing your root device is not compiled directly into the kernel, then your system will most
likely
not boot any more. If you have followed the above steps, you
should be
safe. Special care should be taken with scsi hostadapters, logical
volume
manager (lvm) and reiserfs.
**** Step 11: lilo
lilo is responsible for loading the kernel image and the initrd ramdisk image into the system and for transferring control of the system to the kernel. Therefore, a proper installation of the bootloader (by calling the program lilo) is essential for the system to boot (!). Manually changed settings in /etc/lilo.conf require the admin to
make
sure that /boot/vmlinuz is listed in the first "image" line in
that
file. Verify that the line starting with initrd= is set to initrd=/boot/initrd Execute lilo and you should see your label(s) in an output like Added linux * Every other output should be considered an error and requires attention. If your system managed to reboot before the upgrade,
you
should not see any additional output from lilo at this stage.
**** Step 12: SuSE-7.0 special
If you have a SuSE Linux 7.0 distribution, then continue to read
this
paragraph, otherwise jump to Step 13. If you have performed the kernel upgrade as described in the last
kernel
SuSE Security announcement SuSE-SA:2001:18 and if you have
performed
the upgrade of the glibc as described in Step 8 of
SuSE-SA:2001:18, then
you are done and you should go to Step 13. Otherwise, please read SuSE-SA:2001:18 (from http://www.suse.de/de/support/security/2001_018_kernel_txt.txt)
and
return to the Step 13 in this announcement.
**** Step 13: reboot
If all of the steps above have been successfully applied to your system, then the new kernel including the kernel modules and the initrd should be ready to boot. The system needs to be rebooted
for
the changes to become active. Please make sure that all steps are complete, then reboot using the command shutdown -r now or init 6
________________________________________________________________________ ______
2) Pending vulnerabilities in SuSE Distributions and Workarounds:
- openssh After stabilizing the openssh package, updates for the
distributions
6.4-7.2 are currently being prepared. The update packages fix a
security
problem related to the recently discovered problems with source ip based access restrictions in a user's ~/.ssh/authorized_keys2
file.
The packages will appear shortly on our ftp servers. Please note
that
packages for the distributions 6.3 and up including 7.0 containing cryptographic software are located on the German ftp server
ftp.suse.de,
all other packages can be found on ftp.suse.com at the usual
location.
- squid A squid server can be brought to a crash upon receipt of certain requests. The attacker must have request access to the running
squid
proxy to be able to take advantage of this weakness. The only
effect
of an attack is the Denial of Service (DoS). After an attack, the squid proxy must be restarted. Update packages are available on our ftp server that eliminate the problem. The security announcement for this issue will follow
soon.
________________________________________________________________________ ______
3) standard appendix: authenticity verification, additional
information
- Package authenticity verification:
SuSE update packages are available on many mirror ftp servers all
over
the world. While this service is being considered valuable and
important
to the free and open source software community, many users wish to
be
sure about the origin of the package and its content before
installing
the package. There are two verification methods that can be used independently from each other to prove the authenticity of a
downloaded
file or rpm package: 1) md5sums as provided in the (cryptographically signed)
announcement.
2) using the internal gpg signatures of the rpm package.
1) execute the command md5sum
after you downloaded the file from a SuSE ftp server or its
mirrors.
Then, compare the resulting md5sum with the one that is listed
in the
announcement. Since the announcement containing the checksums
is
cryptographically signed (usually using the key
security@suse.de),
the checksums show proof of the authenticity of the package. We disrecommend to subscribe to security lists which cause the email message containing the announcement to be modified so
that
the signature does not match after transport through the
mailing
list software. Downsides: You must be able to verify the authenticity of the announcement in the first place. If RPM packages are being
rebuilt
and a new version of a package is published on the ftp server,
all
md5 sums for the files are useless.
2) rpm package signatures provide an easy way to verify the
authenticity
of an rpm package. Use the command rpm -v --checksig
to verify the signature of the package, where is the filename of the rpm package that you have downloaded. Of
course,
package authenticity verification can only target an
uninstalled rpm
package file. Prerequisites: a) gpg is installed b) The package is signed using a certain key. The public part
of this
key must be installed by the gpg program in the directory ~/.gnupg/ under the user's home directory who performs the signature verification (usually root). You can import the
key
that is used by SuSE in rpm packages for SuSE Linux by
saving
this announcement to a file ("announcement.txt") and running the command (do "su -" to be root): gpg --batch; gpg < announcement.txt | gpg --import SuSE Linux distributions version 7.1 and thereafter install
the
key "build@suse.de" upon installation or upgrade, provided
that
the package gpg is installed. The file containing the
public key
is placed at the toplevel directory of the first CD
(pubring.gpg)
and at
ftp://ftp.suse.com/pub/suse/pubring.gpg-build.suse.de .
- SuSE runs two security mailing lists to which any interested party
may
subscribe:
suse-security@suse.com - general/linux/SuSE security discussion. All SuSE security announcements are sent to this list. To subscribe, send an email to
. suse-security-announce@suse.com - SuSE's announce-only mailing list. Only SuSE's security annoucements are sent to this list. To subscribe, send an email to
. For general information or the frequently asked questions (faq) send mail to:
or respectively. =================================================== SuSE's security contact is
. The public key is listed below. ===================================================
________________________________________________________________________ ______
The information in this advisory may be distributed or reproduced, provided that the advisory is not modified in any way. In
particular,
it is desired that the cleartext signature shows proof of the authenticity of the text. SuSE GmbH makes no warranties of any kind whatsoever with respect to the information contained in this security advisory.
Type Bits/KeyID Date User ID pub 2048R/3D25D3D9 1999-03-06 SuSE Security Team
pub 1024D/9C800ACA 2000-10-19 SuSE Package Signing Key
- -----BEGIN PGP PUBLIC KEY BLOCK----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org
mQENAzbhLQQAAAEIAKAkXHe0lWRBXLpn38hMHy03F0I4Sszmoc8aaKJrhfhyMlOA BqvklPLE2f9UrI4Xc860gH79ZREwAgPt0pi6+SleNFLNcNFAuuHMLQOOsaMFatbz JR9i4m/lf6q929YROu5zB48rBAlcfTm+IBbijaEdnqpwGib45wE/Cfy6FAttBHQh 1Kp+r/jPbf1mYAvljUfHKuvbg8t2EIQz/5yGp+n5trn9pElfQO2cRBq8LFpf1l+U P7EKjFmlOq+Gs/fF98/dP3DfniSd78LQPq5vp8RL8nr/o2i7jkAQ33m4f1wOBWd+ cZovrKXYlXiR+Bf7m2hpZo+/sAzhd7LmAD0l09kABRG0JVN1U0UgU2VjdXJpdHkg VGVhbSA8c2VjdXJpdHlAc3VzZS5kZT6JARUDBRA24S1H5Fiyh7HKPEUBAVcOB/9b yHYji1/+4Xc2GhvXK0FSJN0MGgeXgW47yxDL7gmR4mNgjlIOUHZj0PEpVjWepOJ7 tQS3L9oP6cpj1Fj/XxuLbkp5VCQ61hpt54coQAvYrnT9rtWEGN+xmwejT1WmYmDJ xG+EGBXKr+XP69oIUl1E2JO3rXeklulgjqRKos4cdXKgyjWZ7CP9V9daRXDtje63 Om8gwSdU/nCvhdRIWp/Vwbf7Ia8iZr9OJ5YuQl0DBG4qmGDDrvImgPAFkYFzwlqo choXFQ9y0YVCV41DnR+GYhwl2qBd81T8aXhihEGPIgaw3g8gd8B5o6mPVgl+nJqI BkEYGBusiag2pS6qwznZiQEVAwUQNuEtBHey5gA9JdPZAQFtOAf+KVh939b0J94u v/kpg4xs1LthlhquhbHcKNoVTNspugiC3qMPyvSX4XcBr2PC0cVkS4Z9PY9iCfT+ x9WM96g39dAF+le2CCx7XISk9XXJ4ApEy5g4AuK7NYgAJd39PPbERgWnxjxir9g0 Ix30dS30bW39D+3NPU5Ho9TD/B7UDFvYT5AWHl3MGwo3a1RhTs6sfgL7yQ3U+mvq MkTExZb5mfN1FeaYKMopoI4VpzNVeGxQWIz67VjJHVyUlF20ekOz4kWVgsxkc8G2 saqZd6yv2EwqYTi8BDAduweP33KrQc4KDDommQNDOXxaKOeCoESIdM4p7Esdjq1o L0oixF12CpkBogQ57vSBEQQAk/GN+ftr7+DBlSoixDDpfRnUk+jApGEt8hCnrnjV nPs/9Cr33+CXLQbILOO7Y5oiPbJdHh45t4E0fKyLVzDerCRFB1swz/mNDxT26DLy sdBV5fwNHTPhxa67goAZVrehQPqJEckkIpYriOaYcKpF3n5fQIZMEfMaHEElQhcX ML8AoJVXDkJYh7vI8EUB8ZURNLZMEECNA/sH0MCnb4Q6ZcRyeZ3+1PHP8hP73b6T epRdLZhaylwVF/iu7uIn62ZUL4//NTOCDY7V63qg4iba/fUbOsWtEnGaiE7mQuAl sSWvRspwRA9/g9rdVf3/JdLJrLmKBTheyG+PSJE3W7cAE4ZWafGxIRCwXhmj3TQn Jn2euqylHRubEQP/aL53NZK0kBdvrKgff6O8Of6tqoss8Dkk55I7QVFSp+My1Dn+ mngQKFejTAgtyo/WmR3wPjQ9HoT2lRiYI2lTRYT4uMdHuwVC3b4DqAKmoy375FER wHkrMVyKBJslv8QtbAWw5A1CAUseaHo+91wmYJ4/4p6YUahqbG/tZyhbxfq0KFN1 U0UgUGFja2FnZSBTaWduaW5nIEtleSA8YnVpbGRAc3VzZS5kZT6IXAQTEQIAHAUC Oe70gQUJA8JnAAQLCgMEAxUDAgMWAgECF4AACgkQqE7a6JyACspfLACffAYA+NM8 NBhyRyH+nTX58CNjwLIAoIx9fj52BJe0xY7WbKoXs1+72b2AiEYEEBECAAYFAjpw XlIACgkQnkDjEAAKq6TczgCgi+ddhWb7+FWcfeE6WwPZccqAHowAnjjtRyGwHLQH r5OTFAYTXi2Wv6jNiQEVAwUQOnBgb3ey5gA9JdPZAQE1pwf/QJ+b34lFBNVUJ7fk /xGJJREt7V12iSafaRzGuH8xWvIz1bb+VARxnnt16FDQ1cDNjoEhCEmcW83Vxp6i JXE9PE8wVA/Yue/bon5JS7J69+UiQ2eq2pudfwljp52lYVM53jgPYEz0q/v3091n lZ8CYkAkN9JDS1lV1gEzJ7J0+POngDpU+lDQT2EC6VKaxeWK8pNt6UFDwICRDQxK nlOoiDvTrdWT7QdJZ4sPv8Qotdw9+tKNbWQ2DqdIRxyTdw9xDfAtcj6mXeQr7852 Lwem1gSKVnEYHZ9g1FTJqVOutY8KhpUc9RfOCRv8XuIxrs4KSbfSF0s8qIRCQelx ufg9AbkCDQQ57vSSEAgAhJHQTejMX+Vr6g1pHDEcusJ63fQ2CfFFE5iE9okH9O7U VCiSfb9CV38dmeHdPCEEjDUWquFYEnvj3WICMtH249t1Ymuf4Du3yRKQ9oXdn/qT Jzlrx9qzjiG3mH7ocwHOgUIwCrZoEdBEVE2n0zPVm+hddwjWWTWXw6pxQz+i9dsN 89xexRV5M9O0bNwCLaNWX2GXeLAkqTK/9EuZy6x2yLxi6du9YYUAXkZpqBhCjtiU XpRoFCdglMznbcAyCk9C2wqb2j/D1Z2BeSBaGCSFkR6pRLebnE17LWcu72Iy+r0z +JecbPiyDpDZj4apn7IC81aNFGi7fNITsHODbwwjiwADBgf/YPvVdzkc8OC7ztac EWCanwylKvxCdKzTDA+DfES6WUYShyiVJvZzRy25LJ5WcK20kzOS6Qv1OrIXiz/p dGy1aKtJZrAnFEsofpmOj8VoqyyFgp/yAGQBp12+mXek7SCZRhuqalDfEMRiWEJ6 J5dLkyShyRDWyPbFh0HXE7QTHN+IKKxxQqNQXL6Z3NSxS61p+5n6BseiDUI39xxk KTFwFrkgUIc5Gs2Or2lhaWvGwSfoCmwbsklszZt6xbU+R0SjFqTvjPWx6eHfqbmN C9WMDdTjGrXDDKXFp2aYlokfN6It9vsbVlGNlOwHt/JjGoPMxW6Xqj0FLA7/Vewg CdXW64hMBBgRAgAMBQI57vSSBQkDwmcAAAoJEKhO2uicgArKSyIAmwUHf/vtKQfc mVg4asR7U6XQl0bAAJ4pO22B5U8UH6IYl2LBCXFqw5+5fA== =rVRn - -----END PGP PUBLIC KEY BLOCK-----
-----BEGIN PGP SIGNATURE----- Version: 2.6.3i Charset: noconv
iQEVAwUBO9mMI3ey5gA9JdPZAQGH8Qf9Fw4zJCYTXHQxQrfEVV2abEoCaPL+K6U2 p4GlZyZs9Ggt0kXQWPrRgLzsgQB97upJBgbNfJ5xV9mYbCyLbkP4uZ/e/8CGnsca /qTf+cOkW/DLFCsPa2utbdFm5BhXlrrKyohlCRIHIab1fSQoy0GKhRHq2jTTdmkO h48uwo9g2DWJJ8t00lQR2h3Z9Pd0PvZpWiceQktcmy2NAEnhCa4o+wyQctTJwiez s9bO1DfK3MN5cgJjO63+n/zLXRMwfAIXqr+/HB4ggs1VOf7lvmonlwVfI171YkDF bmiWx6grq2vfqOtSOJZRtvwKxm8t/ayJFEaRHg2mqIWD+TmFVSY8uw== =xhBs -----END PGP SIGNATURE-----
-- To unsubscribe, e-mail: suse-security-unsubscribe@suse.com For additional commands, e-mail: suse-security-help@suse.com