Re: [radeonhd] HDMI support on 690G
Matthias Hopf writes:
On Feb 19, 08 15:14:42 +0100, Patrick Voigt wrote:
I'm trying to get the projector Panasonic PT-AX200E to work on my Asus M2A-VM-HDMI board using a HDMI connection. I setup up a dual monitor configuration according to the example given in the wiki. The other monitor is connected to the board via DVI. So I want to use to digital outputs simultaneously. In theory this should work using this hardware.
Unfortunately, it will only work in clone mode, always:
DVI-D_1 disconnected (normal) RANDR_OUTPUT_NUMBER: 2 (0x00000002)
DVI-D_2 connected 1280x1024+0+0 (0x47) normal (normal) 376mm x 301mm RANDR_OUTPUT_NUMBER: 2 (0x00000002)
Connectors with the same output number can only display cloned images. This is due to hardware(!) wiring on the boards, the board maker used the same output for different connectors. Bad, ugly. These connectors cannot even be switched on and off independently, and this can result in *very* obscure behavior. The RandR model isn't flexible enough to reflect this.
Although we may not interpret the SupportedDevice table correctly with respect to DFP2 (as this is the first device I've come accross which supports DFP2 and we have not received any information regarding this until yesterday). Still what I'm seeing here after some more thorough investigation is that indeed both outputs are driven by the LVTMA. They listen on different DDC lines, the HDMI port currently only lights up when HDMI is connected at boot time. I'll dive into some more investigation using information I've just received from ATI. I hope that this information will soon be made public as the information on RS690 that has been published does not cover the outputs.
I'm still thinking about misusing the possible_clones field for that, but that would restrict us to having only one cloned-only pair (two in some circumstances), and wouldn't allow us to use cloning in all situations where it actually would make sense.
(WW) RADEONHD(0): RandR: While switching off DVI-D_1: output TMDS B is also used by DVI-D_2 - ignoring
This line in the log indicates this (hardware) configuration.
Which isn't that far off from what I'm seeing on my RS690 board. Cheers, Egbert. -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
I just found this in the FAQ section of the Asus website. http://support.asus.com/faq/faq.aspx?SLanguage=en-us Select the correct motherboard and press the Search button. Then go the page 4 where you find this: Question: "M2A-VM HDMI claimed to support dual display via its available onboard VGA ports. Does that mean I can use "any two" ports to form dual display platform? Also, what types of dual display modes are supported by this motherboard via its onboard VGA?" Answer: "Yes, M2A-VM HDMI can support dual display via the combination of "_*any two digital output ports, or one digital and one analog port*_". You can enable dual display for _*Clone (Both monitors show the same screen),*_ *_Span (expend your desktop among the two monitors)_*, or *_DualView (Two independent display)_*, depending on your need. The analogue ports are: D-Sub S-Video AV YPbPr Digital ports are: DVI HDMI" I think I need to try that under Windows just to make sure it is correct. Unfortunately I have to install it before I can try... :( Another interesting link is here: http://www.digit-life.com/articles2/mainboard/roundup-690g-sep2k7-page2.html It says that the Asus M2A-VM HDMI is different compared to other RS690 boards by allowing simultaneous digital output. Greetings, Patrick Egbert Eich wrote:
Although we may not interpret the SupportedDevice table correctly with respect to DFP2 (as this is the first device I've come accross which supports DFP2 and we have not received any information regarding this until yesterday). Still what I'm seeing here after some more thorough investigation is that indeed both outputs are driven by the LVTMA. They listen on different DDC lines, the HDMI port currently only lights up when HDMI is connected at boot time. I'll dive into some more investigation using information I've just received from ATI. I hope that this information will soon be made public as the information on RS690 that has been published does not cover the outputs.
-- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
On Feb 20, 08 11:46:28 +0100, Patrick Voigt wrote:
Answer: "Yes, M2A-VM HDMI can support dual display via the combination of "_*any two digital output ports, or one digital and one analog port*_". You can enable dual display for _*Clone (Both monitors show the same screen),*_ *_Span (expend your desktop among the two monitors)_*, or *_DualView (Two independent display)_*, depending on your need.
Hm. Interesting. This is not what we see from the Bios tables here, but again, there could be an additional crossbar after the output that connects one of the TMDS-like connectors to different encoders. Nothing we know of yet, though.
I think I need to try that under Windows just to make sure it is correct. Unfortunately I have to install it before I can try... :(
Yep, that is bad luck :^]
Another interesting link is here: http://www.digit-life.com/articles2/mainboard/roundup-690g-sep2k7-page2.html It says that the Asus M2A-VM HDMI is different compared to other RS690 boards by allowing simultaneous digital output.
Ok - maybe the BIOS on this board just doesn't reflect this fact
correctly. If you could check both outputs independently whether they
work, we could verify this thesis.
CU
Matthias
--
Matthias Hopf
Does this work with fglrx?
If fglrx work it maybe logs some useful information with --verbose=7
LieGrü,
strub
--- Matthias Hopf
Hm. Interesting. This is not what we see from the Bios tables here, but again, there could be an additional crossbar after the output that connects one of the TMDS-like connectors to different encoders. Nothing we know of yet, though.
I think I need to try that under Windows just to make sure it is correct. Unfortunately I have to install it before I can try... :(
Yep, that is bad luck :^]
Machen Sie Yahoo! zu Ihrer Startseite. Los geht's: http://de.yahoo.com/set -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
OK, I tested both independendly. My monitor alone connected DVI works perfectly. By the way, also using VGA and DVI simultaneously works without a problem (clone mode, I didn't try anything else yet). Now comes the interesting point: When I only use the projector connected via HDMI the X server crashes somewhere in the radeonhd driver. I created a full debug log . See attachment. I didn't use a xorg.conf file. Hope this helps. Greetings, Patrick Matthias Hopf wrote:
Ok - maybe the BIOS on this board just doesn't reflect this fact correctly. If you could check both outputs independently whether they work, we could verify this thesis.
(gdb) Reading symbols from /usr/bin/Xorg...Reading symbols from /usr/lib/debug/usr/bin/Xorg...done. Using host libthread_db library "/lib/libthread_db.so.1". done. (gdb) (gdb) Signal Stop Print Pass to program Description SIGUSR1 No Yes Yes User defined signal 1 (gdb) Signal Stop Print Pass to program Description SIGUSR2 No Yes Yes User defined signal 2 (gdb) Signal Stop Print Pass to program Description SIGPIPE No Yes Yes Broken pipe (gdb) Starting program: /usr/bin/Xorg _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/bart:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.4.0.90 Release Date: 5 September 2007 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4.1~git20080131-1) Current Operating System: Linux bart 2.6.24.2-26 #1 SMP Tue Feb 19 10:01:39 CET 2008 x86_64 Build Date: 01 February 2008 04:55:21AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 20 14:16:38 2008 (EE) Unable to locate/open config file [Thread debugging using libthread_db enabled] [New Thread 0x2b6dd44ac7f0 (LWP 3321)] New driver is "radeonhd" (==) Using default built-in configuration (54 lines) (EE) Failed to load module "fbdev" (module does not exist, 0) (EE) Failed to load module "vga" (module does not exist, 0) (II) Module "i2c" already built-in (II) Module "ddc" already built-in (EE) RADEONHD(0): Output DVI-D_1 enabled but has no modes (EE) RADEONHD(0): RandR: No valid modes. Disabled. (EE) RADEONHD(0): No valid modes found Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x2b6dd44ac7f0 (LWP 3321)] 0x00002b6dd391cd15 in free () from /lib/libc.so.6 (gdb) Undefined command: "module". Try "help". (gdb) #0 0x00002b6dd391cd15 in free () from /lib/libc.so.6 #1 0x00002b6dd5556160 in RHDMonitorDestroy (Monitor=0x824dd0) at rhd_monitor.c:422 #2 0x00002b6dd5549c2b in RHDConnectorsDestroy (rhdPtr=0x814fd0) at rhd_connector.c:379 #3 0x00002b6dd554c682 in RHDFreeRec (pScrn=0x813ae0) at rhd_driver.c:320 #4 0x00002b6dd554d828 in RHDPreInit (pScrn=0x813ae0, flags=<value optimized out>) at rhd_driver.c:852 #5 0x0000000000468b70 in InitOutput (pScreenInfo=0x7e6d00, argc=1, argv=0x7fffd86a5e68) at ../../../../hw/xfree86/common/xf86Init.c:548 #6 0x00000000004369af in main (argc=1, argv=0x7fffd86a5e68, envp=0x7fffd86a5e78) at ../../dix/main.c:369 (gdb) Continuing. Backtrace: 0: /usr/bin/Xorg(xf86SigHandler+0x6a) [0x47568a] 1: /lib/libc.so.6 [0x2b6dd38dd240] 2: /lib/libc.so.6(cfree+0x25) [0x2b6dd391cd15] 3: /usr/lib/xorg/modules/drivers//radeonhd_drv.so(RHDMonitorDestroy+0x20) [0x2b6dd5556160] 4: /usr/lib/xorg/modules/drivers//radeonhd_drv.so(RHDConnectorsDestroy+0x3b) [0x2b6dd5549c2b] 5: /usr/lib/xorg/modules/drivers//radeonhd_drv.so [0x2b6dd554c682] 6: /usr/lib/xorg/modules/drivers//radeonhd_drv.so [0x2b6dd554d828] 7: /usr/bin/Xorg(InitOutput+0xa20) [0x468b70] 8: /usr/bin/Xorg(main+0x29f) [0x4369af] 9: /lib/libc.so.6(__libc_start_main+0xf4) [0x2b6dd38ca1c4] 10: /usr/bin/Xorg(FontFileCompleteXLFD+0x279) [0x435ec9] Fatal server error: Caught signal 11. Server aborting Program received signal SIGABRT, Aborted. 0x00002b6dd38dd1d5 in raise () from /lib/libc.so.6 (gdb) The program is running. Exit anyway? (y or n) [answered Y; input not from terminal] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/bart:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.4.0.90 Release Date: 5 September 2007 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4.1~git20080131-1) Current Operating System: Linux bart 2.6.24.2-26 #1 SMP Tue Feb 19 10:01:39 CET 2008 x86_64 Build Date: 01 February 2008 04:55:21AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 20 14:16:38 2008 (EE) Unable to locate/open config file (II) Loader magic: 0x7b2660 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 2.0 X.Org XInput driver : 2.0 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "pcidata" (II) Loading /usr/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0 (--) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1002,7910 card 1043,826d rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1002,7912 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 1002,7917 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:12:0: chip 1002,4380 card 1043,8231 rev 00 class 01,06,01 hdr 00 (II) PCI: 00:13:0: chip 1002,4387 card 1043,81ef rev 00 class 0c,03,10 hdr 80 (II) PCI: 00:13:1: chip 1002,4388 card 1043,81ef rev 00 class 0c,03,10 hdr 00 (II) PCI: 00:13:2: chip 1002,4389 card 1043,81ef rev 00 class 0c,03,10 hdr 00 (II) PCI: 00:13:3: chip 1002,438a card 1043,81ef rev 00 class 0c,03,10 hdr 00 (II) PCI: 00:13:4: chip 1002,438b card 1043,81ef rev 00 class 0c,03,10 hdr 00 (II) PCI: 00:13:5: chip 1002,4386 card 1043,81ef rev 00 class 0c,03,20 hdr 00 (II) PCI: 00:14:0: chip 1002,4385 card 1043,81ef rev 14 class 0c,05,00 hdr 80 (II) PCI: 00:14:1: chip 1002,438c card 1043,81ef rev 00 class 01,01,8a hdr 00 (II) PCI: 00:14:2: chip 1002,4383 card 1043,8249 rev 00 class 04,03,00 hdr 00 (II) PCI: 00:14:3: chip 1002,438d card 1043,81ef rev 00 class 06,01,00 hdr 80 (II) PCI: 00:14:4: chip 1002,4384 card 0000,0000 rev 00 class 06,04,01 hdr 81 (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 01:05:0: chip 1002,791e card 1043,826d rev 00 class 03,00,00 hdr 80 (II) PCI: 01:05:2: chip 1002,7919 card 1002,7919 rev 00 class 04,03,00 hdr 00 (II) PCI: 02:00:0: chip 10ec,8168 card 1043,81aa rev 01 class 02,00,00 hdr 00 (II) PCI: 03:06:0: chip 1260,3873 card 16a5,1601 rev 01 class 02,80,00 hdr 00 (II) PCI: 03:07:0: chip 1106,3044 card 1043,81fe rev c0 class 0c,00,10 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B] [1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B] [2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B] [3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xfda00000 - 0xfdbfffff (0x200000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:7:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] [1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [2] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [3] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xfdf00000 - 0xfdffffff (0x100000) MX[B] (II) Bus 2 prefetchable memory range: [0] -1 0 0xfdc00000 - 0xfdcfffff (0x100000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) Subtractive PCI-to-PCI bridge: (II) Bus 3: bridge is at (0:20:4), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared) (II) Bus 3 I/O range: [0] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B] [1] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B] [2] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B] [3] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B] (II) Bus 3 non-prefetchable memory range: [0] -1 0 0xfde00000 - 0xfdefffff (0x100000) MX[B] (II) Bus 3 prefetchable memory range: [0] -1 0 0xfdd00000 - 0xfddfffff (0x100000) MX[B] (--) PCI:*(1:5:0) ATI Technologies Inc Radeon X1200 Series rev 0, Mem @ 0xf0000000/27, 0xfdbe0000/16, 0xfda00000/20, I/O @ 0xcc00/8 (II) Matched radeonhd from file name radeonhd.ids in autoconfig (==) Matched radeonhd for the autoconfigured driver New driver is "radeonhd" (==) Using default built-in configuration (54 lines) (==) --- Start of built-in configuration --- Section "Module" Load "extmod" Load "dbe" Load "glx" Load "freetype" Load "record" Load "dri" EndSection Section "Monitor" Identifier "Builtin Default Monitor" EndSection Section "Device" Identifier "Builtin Default radeonhd Device 0" Driver "radeonhd" EndSection Section "Screen" Identifier "Builtin Default radeonhd Screen 0" Device "Builtin Default radeonhd Device 0" Monitor "Builtin Default Monitor" EndSection Section "Device" Identifier "Builtin Default fbdev Device 0" Driver "fbdev" EndSection Section "Screen" Identifier "Builtin Default fbdev Screen 0" Device "Builtin Default fbdev Device 0" Monitor "Builtin Default Monitor" EndSection Section "Device" Identifier "Builtin Default vesa Device 0" Driver "vesa" EndSection Section "Screen" Identifier "Builtin Default vesa Screen 0" Device "Builtin Default vesa Device 0" Monitor "Builtin Default Monitor" EndSection Section "Device" Identifier "Builtin Default vga Device 0" Driver "vga" EndSection Section "Screen" Identifier "Builtin Default vga Screen 0" Device "Builtin Default vga Device 0" Monitor "Builtin Default Monitor" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default radeonhd Screen 0" Screen "Builtin Default fbdev Screen 0" Screen "Builtin Default vesa Screen 0" Screen "Builtin Default vga Screen 0" EndSection (==) --- End of built-in configuration --- (==) ServerLayout "Builtin Default Layout" (**) |-->Screen "Builtin Default radeonhd Screen 0" (0) (**) | |-->Monitor "Builtin Default Monitor" (**) | |-->Device "Builtin Default radeonhd Device 0" (**) |-->Screen "Builtin Default fbdev Screen 0" (1) (**) | |-->Monitor "Builtin Default Monitor" (**) | |-->Device "Builtin Default fbdev Device 0" (**) |-->Screen "Builtin Default vesa Screen 0" (2) (**) | |-->Monitor "Builtin Default Monitor" (**) | |-->Device "Builtin Default vesa Device 0" (**) |-->Screen "Builtin Default vga Screen 0" (3) (**) | |-->Monitor "Builtin Default Monitor" (**) | |-->Device "Builtin Default vga Device 0" (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/Type1" does not exist. Entry deleted from font path. (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi (==) RgbPath set to "/etc/X11/rgb" (==) ModulePath set to "/usr/lib/xorg/modules" (==) |-->Input Device "<default pointer>" (==) |-->Input Device "<default keyboard>" (==) The core pointer device wasn't specified explicitly in the layout. Using the default mouse configuration. (==) The core keyboard device wasn't specified explicitly in the layout. Using the default keyboard configuration. (II) Open ACPI successful (/var/run/acpid.socket) (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xfdeff000 - 0xfdeff7ff (0x800) MX[B] [1] -1 0 0xfddff000 - 0xfddfffff (0x1000) MX[B] [2] -1 0 0xfdfff000 - 0xfdffffff (0x1000) MX[B] [3] -1 0 0xfdbfc000 - 0xfdbfffff (0x4000) MX[B] [4] -1 0 0xfe020000 - 0xfe023fff (0x4000) MX[B] [5] -1 0 0xfe029000 - 0xfe0290ff (0x100) MX[B] [6] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[B] [7] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B] [8] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B] [9] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B] [10] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[B] [11] -1 0 0xfe02f000 - 0xfe02f3ff (0x400) MX[B] [12] -1 0 0xfda00000 - 0xfdafffff (0x100000) MX[B](B) [13] -1 0 0xfdbe0000 - 0xfdbeffff (0x10000) MX[B](B) [14] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [15] -1 0 0x0000bc00 - 0x0000bc7f (0x80) IX[B] [16] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [17] -1 0 0x0000e400 - 0x0000e40f (0x10) IX[B] [18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [22] -1 0 0x00000b00 - 0x00000b0f (0x10) IX[B] [23] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[B] [24] -1 0 0x0000f000 - 0x0000f003 (0x4) IX[B] [25] -1 0 0x0000f400 - 0x0000f407 (0x8) IX[B] [26] -1 0 0x0000f800 - 0x0000f803 (0x4) IX[B] [27] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[B] [28] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xfdeff000 - 0xfdeff7ff (0x800) MX[B] [1] -1 0 0xfddff000 - 0xfddfffff (0x1000) MX[B] [2] -1 0 0xfdfff000 - 0xfdffffff (0x1000) MX[B] [3] -1 0 0xfdbfc000 - 0xfdbfffff (0x4000) MX[B] [4] -1 0 0xfe020000 - 0xfe023fff (0x4000) MX[B] [5] -1 0 0xfe029000 - 0xfe0290ff (0x100) MX[B] [6] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[B] [7] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B] [8] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B] [9] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B] [10] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[B] [11] -1 0 0xfe02f000 - 0xfe02f3ff (0x400) MX[B] [12] -1 0 0xfda00000 - 0xfdafffff (0x100000) MX[B](B) [13] -1 0 0xfdbe0000 - 0xfdbeffff (0x10000) MX[B](B) [14] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [15] -1 0 0x0000bc00 - 0x0000bc7f (0x80) IX[B] [16] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [17] -1 0 0x0000e400 - 0x0000e40f (0x10) IX[B] [18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [22] -1 0 0x00000b00 - 0x00000b0f (0x10) IX[B] [23] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[B] [24] -1 0 0x0000f000 - 0x0000f003 (0x4) IX[B] [25] -1 0 0x0000f400 - 0x0000f407 (0x8) IX[B] [26] -1 0 0x0000f800 - 0x0000f803 (0x4) IX[B] [27] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[B] [28] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xfdeff000 - 0xfdeff7ff (0x800) MX[B] [5] -1 0 0xfddff000 - 0xfddfffff (0x1000) MX[B] [6] -1 0 0xfdfff000 - 0xfdffffff (0x1000) MX[B] [7] -1 0 0xfdbfc000 - 0xfdbfffff (0x4000) MX[B] [8] -1 0 0xfe020000 - 0xfe023fff (0x4000) MX[B] [9] -1 0 0xfe029000 - 0xfe0290ff (0x100) MX[B] [10] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[B] [11] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B] [12] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B] [13] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B] [14] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[B] [15] -1 0 0xfe02f000 - 0xfe02f3ff (0x400) MX[B] [16] -1 0 0xfda00000 - 0xfdafffff (0x100000) MX[B](B) [17] -1 0 0xfdbe0000 - 0xfdbeffff (0x10000) MX[B](B) [18] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [21] -1 0 0x0000bc00 - 0x0000bc7f (0x80) IX[B] [22] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [23] -1 0 0x0000e400 - 0x0000e40f (0x10) IX[B] [24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [28] -1 0 0x00000b00 - 0x00000b0f (0x10) IX[B] [29] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[B] [30] -1 0 0x0000f000 - 0x0000f003 (0x4) IX[B] [31] -1 0 0x0000f400 - 0x0000f407 (0x8) IX[B] [32] -1 0 0x0000f800 - 0x0000f803 (0x4) IX[B] [33] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[B] [34] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B](B) (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "freetype" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded. This was enabled by default and also specified in the config file. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.4.0.90, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "radeonhd" (II) Loading /usr/lib/xorg/modules/drivers//radeonhd_drv.so (II) Module radeonhd: vendor="AMD GPG" compiled for 1.4.0.90, module version = 1.1.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 2.0 (II) LoadModule: "fbdev" (WW) Warning, couldn't open module fbdev (II) UnloadModule: "fbdev" (EE) Failed to load module "fbdev" (module does not exist, 0) (II) LoadModule: "vesa" (II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.4.0, module version = 1.3.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 2.0 (II) LoadModule: "vga" (WW) Warning, couldn't open module vga (II) UnloadModule: "vga" (EE) Failed to load module "vga" (module does not exist, 0) (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.4.0, module version = 1.2.3 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.4.0, module version = 1.2.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices: RV505 : Radeon X1550, X1550 64bit. RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350. RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250. R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350. RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200. RV535 : Radeon X1300, X1650. RV550 : Radeon X2300 HD. RV560 : Radeon X1650. RV570 : Radeon X1950, X1950 GT; FireGL V7400. R580 : Radeon X1900, X1950; AMD Stream Processor. R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650. RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000. RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630; FireGL V3600/V5600. RV670 : Radeon HD 3850, HD 3870, FireGL V7700. R680 : Radeon HD 3870 X2. M52 : Mobility Radeon X1300. M54 : Mobility Radeon X1400; M54-GL. M56 : Mobility Radeon X1600; Mobility FireGL V5200. M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200. M62 : Mobility Radeon X1350. M64 : Mobility Radeon X1450, X2300. M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250. M68 : Mobility Radeon X1900. M71 : Mobility Radeon HD 2300. M72 : Mobility Radeon HD 2400; Radeon E2400. M74 : Mobility Radeon HD 2400 XT. M76 : Mobility Radeon HD 2600 (Gemini ATI) Mobility Radeon HD 2600 XT. RS600 : Radeon Xpress 1200, Xpress 1250. RS690 : Radeon X1200, X1250, X1270. (II) RADEONHD: version 1.1.0, built from git branch master, commit a9af866a + changes (II) VESA: driver for VESA chipsets: vesa (II) Primary Device is: PCI 01:05:0 (--) Assigning device section with no busID to primary device (--) Chipset RS690 found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xfdeff000 - 0xfdeff7ff (0x800) MX[B] [5] -1 0 0xfddff000 - 0xfddfffff (0x1000) MX[B] [6] -1 0 0xfdfff000 - 0xfdffffff (0x1000) MX[B] [7] -1 0 0xfdbfc000 - 0xfdbfffff (0x4000) MX[B] [8] -1 0 0xfe020000 - 0xfe023fff (0x4000) MX[B] [9] -1 0 0xfe029000 - 0xfe0290ff (0x100) MX[B] [10] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[B] [11] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B] [12] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B] [13] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B] [14] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[B] [15] -1 0 0xfe02f000 - 0xfe02f3ff (0x400) MX[B] [16] -1 0 0xfda00000 - 0xfdafffff (0x100000) MX[B](B) [17] -1 0 0xfdbe0000 - 0xfdbeffff (0x10000) MX[B](B) [18] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [21] -1 0 0x0000bc00 - 0x0000bc7f (0x80) IX[B] [22] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [23] -1 0 0x0000e400 - 0x0000e40f (0x10) IX[B] [24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [28] -1 0 0x00000b00 - 0x00000b0f (0x10) IX[B] [29] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[B] [30] -1 0 0x0000f000 - 0x0000f003 (0x4) IX[B] [31] -1 0 0x0000f400 - 0x0000f407 (0x8) IX[B] [32] -1 0 0x0000f800 - 0x0000f803 (0x4) IX[B] [33] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[B] [34] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B](B) (--) Assigning device section with no busID to primary device (--) Chipset vesa found (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xfdeff000 - 0xfdeff7ff (0x800) MX[B] [5] -1 0 0xfddff000 - 0xfddfffff (0x1000) MX[B] [6] -1 0 0xfdfff000 - 0xfdffffff (0x1000) MX[B] [7] -1 0 0xfdbfc000 - 0xfdbfffff (0x4000) MX[B] [8] -1 0 0xfe020000 - 0xfe023fff (0x4000) MX[B] [9] -1 0 0xfe029000 - 0xfe0290ff (0x100) MX[B] [10] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[B] [11] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B] [12] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B] [13] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B] [14] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[B] [15] -1 0 0xfe02f000 - 0xfe02f3ff (0x400) MX[B] [16] -1 0 0xfda00000 - 0xfdafffff (0x100000) MX[B](B) [17] -1 0 0xfdbe0000 - 0xfdbeffff (0x10000) MX[B](B) [18] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [21] -1 0 0x0000bc00 - 0x0000bc7f (0x80) IX[B] [22] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [23] -1 0 0x0000e400 - 0x0000e40f (0x10) IX[B] [24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [28] -1 0 0x00000b00 - 0x00000b0f (0x10) IX[B] [29] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[B] [30] -1 0 0x0000f000 - 0x0000f003 (0x4) IX[B] [31] -1 0 0x0000f400 - 0x0000f407 (0x8) IX[B] [32] -1 0 0x0000f800 - 0x0000f803 (0x4) IX[B] [33] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[B] [34] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B](B) (II) RADEONHD(0): Creating default Display subsection in Screen section "Builtin Default radeonhd Screen 0" for depth/fbbpp 24/32 (==) RADEONHD(0): Depth 24, (--) framebuffer bpp 32 (**) RADEONHD(0): Selected XAA 2D acceleration. (--) RADEONHD(0): Detected an RS690 on a Asus M2A-VM (II) RADEONHD(0): Mapped IO at 0x2b6dd5d8a000 (size 0x00010000) (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location (II) RADEONHD(0): ATOM BIOS Rom: SubsystemVendorID: 0x1043 SubsystemID: 0x826d IOBaseAddress: 0xcc00 Filename: BR26529.bin BIOS Bootup Message: ATI Radeon Xpress ?1250? for Asus/M2A-VM (--) RADEONHD(0): VideoRAM: 131072 kByte (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16 (II) RADEONHD(0): Start of VRAM area used by Firmware: 0x7ffc000 (II) RADEONHD(0): AtomBIOS requests 16kB of VRAM scratch space (II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x7ffc000 (II) RADEONHD(0): Default Engine Clock: 400000 (II) RADEONHD(0): Default Memory Clock: 200000 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000 (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500 (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000 (II) RADEONHD(0): Maximum Pixel Clock: 400000 (II) RADEONHD(0): Reference Clock: 14320 (II) Loading sub module "i2c" (II) LoadModule: "i2c"(II) Module "i2c" already built-in (II) RADEONHD(0): Default Engine Clock: 400000 (II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized. (II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized. (II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized. (II) Loading sub module "ddc" (II) LoadModule: "ddc"(II) Module "ddc" already built-in (II) RADEONHD(0): Detected VGA mode. (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000 (II) RADEONHD(0): Maximum Pixel Clock: 400000 (II) RADEONHD(0): Reference Clock: 14320 (II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_VGA, "VGA CRT1", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } } (II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_TV, "SVIDEO TV1", DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } } (II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "HDMI Type A DFP2", RHD_DDC_2, RHD_HPD_NONE, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_NONE } } (II) RADEONHD(0): Connector[3] {RHD_CONNECTOR_DVI, "HDMI Type A DFP3", RHD_DDC_1, RHD_HPD_NONE, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_NONE } } (--) RADEONHD(0): Attaching Output DAC A to Connector VGA 1 (--) RADEONHD(0): Attaching Output DAC A to Connector TV SVIDEO (--) RADEONHD(0): Attaching Output TMDS B to Connector DVI-D 1 (--) RADEONHD(0): Attaching Output TMDS B to Connector DVI-D 2 (II) RADEONHD(0): RandR: Adding RRoutput VGA_1 for Output DAC A (II) RADEONHD(0): RandR: Adding RRoutput TV_SVIDEO for Output DAC A (II) RADEONHD(0): RandR: Adding RRoutput DVI-D_1 for Output TMDS B (II) RADEONHD(0): RandR: Adding RRoutput DVI-D_2 for Output TMDS B (II) RADEONHD(0): Output VGA_1 using monitor section Builtin Default Monitor (II) RADEONHD(0): Output TV_SVIDEO has no monitor section (II) RADEONHD(0): Output DVI-D_1 has no monitor section (II) RADEONHD(0): Output DVI-D_2 has no monitor section (WW) RADEONHD(0): DACASenseCRT: connector type 4 is not supported. (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90 (II) RADEONHD(0): I2C device "RHD I2C line 2:ddc2" registered at address 0xA0. (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90 (II) RADEONHD(0): EDID data for AX-200 (II) RADEONHD(0): Manufacturer: MEI Model: d076 Serial#: 340131857 (II) RADEONHD(0): Year: 2007 Week: 0 (II) RADEONHD(0): EDID Version: 1.3 (II) RADEONHD(0): Digital Display Input (II) RADEONHD(0): Max H-Image Size [cm]: H-Size may change, V-Size may change (II) RADEONHD(0): Gamma: 2.20 (II) RADEONHD(0): No DPMS capabilities specified; RGB/Color Display (II) RADEONHD(0): First detailed timing is preferred mode (II) RADEONHD(0): redX: 0.649 redY: 0.342 greenX: 0.326 greenY: 0.649 (II) RADEONHD(0): blueX: 0.139 blueY: 0.050 whiteX: 0.284 whiteY: 0.334 (II) RADEONHD(0): Manufacturer's mask: 0 (II) RADEONHD(0): Supported additional Video Mode: (II) RADEONHD(0): clock: 74.2 MHz Image Size: 708 x 398 mm (II) RADEONHD(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 (II) RADEONHD(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0 (II) RADEONHD(0): Supported additional Video Mode: (II) RADEONHD(0): clock: 74.2 MHz Image Size: 708 x 398 mm (II) RADEONHD(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0 (II) RADEONHD(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0 (II) RADEONHD(0): Monitor name: AX-200 (II) RADEONHD(0): Ranges: V min: 24 V max: 61 Hz, H min: 28 H max: 68 kHz, PixClock max 150 MHz (II) RADEONHD(0): Number of EDID sections to follow: 1 (II) RADEONHD(0): EDID (in hex): (II) RADEONHD(0): 00ffffffffffff0034a976d011004614 (II) RADEONHD(0): 00110103800000780a69bea65753a623 (II) RADEONHD(0): 0c485500000001010101010101010101 (II) RADEONHD(0): 010101010101011d8018711c1620582c (II) RADEONHD(0): 2500c48e2100009e011d80d0721c1620 (II) RADEONHD(0): 102c2580c48e2100009e000000fc0041 (II) RADEONHD(0): 582d3230300a202020202020000000fd (II) RADEONHD(0): 00183d1c440f000a2020202020200167 (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90 (II) RADEONHD(0): Output VGA_1 disconnected (II) RADEONHD(0): Output TV_SVIDEO disconnected (II) RADEONHD(0): Output DVI-D_1 connected (II) RADEONHD(0): Output DVI-D_2 disconnected (EE) RADEONHD(0): Output DVI-D_1 enabled but has no modes (EE) RADEONHD(0): RandR: No valid modes. Disabled. (WW) RADEONHD(0): DACASenseCRT: connector type 4 is not supported. (II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" registered at address 0xA0. (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90 (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90 (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90 (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90 (II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" removed. (WW) RADEONHD(0): Connector "DVI-D 2": Failed to retrieve Monitor information. (WW) RADEONHD(0): A Monitor section has been specified in the config file. This might badly affect mode validation, and might make X fail. Unless this section is absolutely necessary, comment out the line Monitor "Builtin Default Monitor" from the Screen section in your config file. (II) RADEONHD(0): Listing modesetting layout: CRTC 1: tied to PLL 1 and LUT A: Outputs: TMDS B (DVI-D 2) CRTC 2: unused Unused Outputs: DAC A (==) RADEONHD(0): RGB weight 888 (==) RADEONHD(0): Default visual is TrueColor (==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0) (EE) RADEONHD(0): No valid modes found (II) RADEONHD(0): Destroying DAC A (II) RADEONHD(0): Destroying TMDS B Backtrace: 0: /usr/bin/Xorg(xf86SigHandler+0x6a) [0x47568a] 1: /lib/libc.so.6 [0x2b6dd38dd240] 2: /lib/libc.so.6(cfree+0x25) [0x2b6dd391cd15] 3: /usr/lib/xorg/modules/drivers//radeonhd_drv.so(RHDMonitorDestroy+0x20) [0x2b6dd5556160] 4: /usr/lib/xorg/modules/drivers//radeonhd_drv.so(RHDConnectorsDestroy+0x3b) [0x2b6dd5549c2b] 5: /usr/lib/xorg/modules/drivers//radeonhd_drv.so [0x2b6dd554c682] 6: /usr/lib/xorg/modules/drivers//radeonhd_drv.so [0x2b6dd554d828] 7: /usr/bin/Xorg(InitOutput+0xa20) [0x468b70] 8: /usr/bin/Xorg(main+0x29f) [0x4369af] 9: /lib/libc.so.6(__libc_start_main+0xf4) [0x2b6dd38ca1c4] 10: /usr/bin/Xorg(FontFileCompleteXLFD+0x279) [0x435ec9] Fatal server error: Caught signal 11. Server aborting
On Feb 20, 08 14:34:33 +0100, Patrick Voigt wrote:
Now comes the interesting point: When I only use the projector connected via HDMI the X server crashes somewhere in the radeonhd driver. I created a full debug log . See attachment. I didn't use a xorg.conf file.
Ok, the crash shouldn't happen, but we won't be able to pin down the reason for the crash without a full backtrace. Nevertheless, the server is crashing because it doesn't find any modes for something connected to DVI_D-1 (this is the HDMI connector?). So either the BIOS information is wrong, or we still parse something incorrectly.
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_VGA, "VGA CRT1", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } } (II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_TV, "SVIDEO TV1", DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } } (II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "HDMI Type A DFP2", RHD_DDC_2, RHD_HPD_NONE, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_NONE } } (II) RADEONHD(0): Connector[3] {RHD_CONNECTOR_DVI, "HDMI Type A DFP3", RHD_DDC_1, RHD_HPD_NONE, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_NONE } }
Please run conntest as indicated in the README (all combinations of monitors attached). Maybe we can come up with something.
(II) RADEONHD(0): EDID data for AX-200
So your monitor is detected.
(II) RADEONHD(0): Output VGA_1 disconnected (II) RADEONHD(0): Output TV_SVIDEO disconnected (II) RADEONHD(0): Output DVI-D_1 connected (II) RADEONHD(0): Output DVI-D_2 disconnected (EE) RADEONHD(0): Output DVI-D_1 enabled but has no modes
... but no modes found?
Randr just isn't verbose enough :-(
Matthias
--
Matthias Hopf
On Feb 20, 2008 5:46 AM, Patrick Voigt
I just found this in the FAQ section of the Asus website. http://support.asus.com/faq/faq.aspx?SLanguage=en-us Select the correct motherboard and press the Search button. Then go the page 4 where you find this:
Question: "M2A-VM HDMI claimed to support dual display via its available onboard VGA ports. Does that mean I can use "any two" ports to form dual display platform? Also, what types of dual display modes are supported by this motherboard via its onboard VGA?"
Answer: "Yes, M2A-VM HDMI can support dual display via the combination of "_*any two digital output ports, or one digital and one analog port*_". You can enable dual display for _*Clone (Both monitors show the same screen),*_ *_Span (expend your desktop among the two monitors)_*, or *_DualView (Two independent display)_*, depending on your need.
The analogue ports are: D-Sub S-Video AV YPbPr
Digital ports are: DVI HDMI"
I think I need to try that under Windows just to make sure it is correct. Unfortunately I have to install it before I can try... :(
Another interesting link is here: http://www.digit-life.com/articles2/mainboard/roundup-690g-sep2k7-page2.html
It says that the Asus M2A-VM HDMI is different compared to other RS690 boards by allowing simultaneous digital output.
Just to clarify, the ports are independent. I have the same board. I've used them independently with the radeon driver, however you have to boot up with the HMDI port connected as I still haven't sorted out all of the atom calls needed yet. We are sorting out the necessary information now. Alex
Greetings, Patrick
Egbert Eich wrote:
Although we may not interpret the SupportedDevice table correctly with respect to DFP2 (as this is the first device I've come accross which supports DFP2 and we have not received any information regarding this until yesterday). Still what I'm seeing here after some more thorough investigation is that indeed both outputs are driven by the LVTMA. They listen on different DDC lines, the HDMI port currently only lights up when HDMI is connected at boot time. I'll dive into some more investigation using information I've just received from ATI. I hope that this information will soon be made public as the information on RS690 that has been published does not cover the outputs.
-- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
-- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
Bingo! I just installed the latest version of fglrx and it is able to drive both DVI and HDMI simultaneously! The Catalyst control center application offers to use different modes besides clone, but the app crashes when choosing something else. I didn't dive into it, I just gave it a try. So at least I prevented installing Windows :) just to find out if the mainbord is capable of what it is promising. I'll do the conntest tests later. Greetings, Patrick Mark Struberg wrote:
Does this work with fglrx? If fglrx work it maybe logs some useful information with --verbose=7
LieGrü, strub
-- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
Matthias Hopf wrote:
Please run conntest as indicated in the README (all combinations of monitors attached). Maybe we can come up with something.
OK. I run conntest with various configurations: 1.) No output device connected at all. I logged in remotely. Checking connectors on 0x791E, 0x1043, 0x826D (@01:05:00): Load Detection: RHD_OUTPUT_NONE HotPlug: RHD_HPD_NONE DDC: RHD_DDC_NONE LVDS Info: 18bits, single link, LDI Panel found. Power Timing: 0x000, 0x000, 0x00, 0x00, 0x000 Macro: 0x00000000, Clock Pattern: 0x0001 2.) Nothing but one monitor connected via VGA. Checking connectors on 0x791E, 0x1043, 0x826D (@01:05:00): Load Detection: RHD_OUTPUT_DACA HotPlug: RHD_HPD_NONE DDC: RHD_DDC_0 3.) Nothing but one monitor connected via DVI. Checking connectors on 0x791E, 0x1043, 0x826D (@01:05:00): Load Detection: RHD_OUTPUT_NONE HotPlug: RHD_HPD_0 DDC: RHD_DDC_1 LVDS Info: 18bits, single link, LDI Panel found. Power Timing: 0x000, 0x000, 0x00, 0x00, 0x000 Macro: 0x00000000, Clock Pattern: 0x0001 4.) Nothing but one projector connected via HDMI. I logged in remotely. Checking connectors on 0x791E, 0x1043, 0x826D (@01:05:00): Load Detection: RHD_OUTPUT_NONE HotPlug: RHD_HPD_NONE DDC: RHD_DDC_2 LVDS Info: 18bits, single link, LDI Panel found. Power Timing: 0x000, 0x000, 0x00, 0x00, 0x000 Macro: 0x00000000, Clock Pattern: 0x0001 5.) One projector connected via VGA and one monitor via DVI. Checking connectors on 0x791E, 0x1043, 0x826D (@01:05:00): Load Detection: RHD_OUTPUT_DACA HotPlug: RHD_HPD_0 DDC: RHD_DDC_1 LVDS Info: 18bits, single link, LDI Panel found. Power Timing: 0x000, 0x000, 0x00, 0x00, 0x000 Macro: 0x00000000, Clock Pattern: 0x0001 6.) One monitor connected via DVI and one projector via HDMI. Checking connectors on 0x791E, 0x1043, 0x826D (@01:05:00): Load Detection: RHD_OUTPUT_NONE HotPlug: RHD_HPD_0 DDC: RHD_DDC_1 RHD_DDC_2 LVDS Info: 18bits, single link, LDI Panel found. Power Timing: 0x000, 0x000, 0x00, 0x00, 0x000 Macro: 0x00000000, Clock Pattern: 0x0001 Greetings, Patrick -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
participants (5)
-
Alex Deucher -
Egbert Eich -
Mark Struberg -
Matthias Hopf -
Patrick Voigt