Hallo,
o.g. DVD-Brenner soll CD-R,CD-RW,DVD-R, DVD+R, DVD-RW,DVD+RW und DVD-RAM
brennen können - er tut's aber nicht (mit einer Ausnahme).
Ich hab den bis dahin gut funktionierenden CD-Brenner ausgebaut und
den LG4040B (GSA4040B) eingebaut. War ja schließlich der Testsieger bei
"Linux User".
Nun zu den Problemen (alle folgenden Ausgaben sind "simulate/dummy"):
- CD-R/RW brennen geht nicht. Ausgabe von cdrecord (Rohling CD-R Verbatim):
----------------------------------------------------------------------
# cdrdao simulate --device 0,0,0 --driver generic-mmc -n --speed 16 -v2 --eject mops-1.cue
Cdrdao version 1.1.7-suse - (C) Andreas Mueller
SCSI interface library - (C) Joerg Schilling
Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.
Using libscg version 'schily-0.7'
0,0,0: HL-DT-ST DVDRAM GSA-4040B Rev: A301
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000)
Starting write simulation at speed 16...
Process can be aborted with QUIT signal (usually CTRL-\).
Turning BURN-Proof on
cdrdao: Input/output error. : scsi sendcmd: no error
CDB: 2A 00 FF FF FF 6A 00 00 1A 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 80 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 180s
ERROR: Write data failed.
ERROR: Simulation failed.
----------------------------------------------------------------------
- DVD-R brennen geht nicht. Ausgabe von cdrecord-ProDVD (Rohling DVD-R FUJIFILM):
-----------------------------------------------------------------------------------------
# cdrecord-wrapper.sh speed=2 -dao -v dev=0,0,0 -dummy DVDimage.iso
Cdrecord-ProDVD-Clone 2.01a12 (i586-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
Unlocked features: ProDVD Clone
Limited features:
This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4040B'
Revision : 'A301'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: DVD-R sequential recording
Profile: DVD-RAM
Profile: DVD-R sequential recording (current)
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD+RW
Profile: DVD+R
Profile: DVD-ROM
Profile: CD-R
Profile: CD-RW
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1245184 = 1216 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 2231 MB
Total size: 2231 MB = 1142704 sectors
Current Secsize: 2048
Total power on hours: 313315
cdrecord-ProDVD: Input/output error. log sense: scsi sendcmd: no error
CDB: 4D 00 70 00 00 00 01 00 04 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 4D 00 00 0C 24 00 00 C0
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 (not valid) field ptr 0
cmd finished after 0.002s timeout 100s
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1155792
Starting to write CD/DVD at speed 2 in dummy SAO mode for single session.
Last chance to quit, starting dummy write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Turning BURN-Free off
Starting new track at sector: 0
Track 01: 0 of 2231 MB written.
Hier abgebrochen nach 5min, da nix passierte
--------------------------------------------------------------------------------------
- DVD+RW brennen funktioniert leidlich (speed nur 1.2x ), hier mal unsimuliert:
--------------------------------------------------------------------------------------
# cdrecord-wrapper.sh -dao -v dev=0,0,0 DVDimage.iso
Cdrecord-ProDVD-Clone 2.01a12 (i586-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
Unlocked features: ProDVD Clone
Limited features:
This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4040B'
Revision : 'A301'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: DVD+RW
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD+RW (current)
Profile: DVD+R
Profile: DVD-ROM
Profile: CD-R
Profile: CD-RW
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc-3 DVD+RW driver (mmc_dvdplusrw).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 983040 = 960 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 2231 MB
Total size: 2231 MB = 1142704 sectors
Current Secsize: 2048
Trying to clear drive status.
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 1152400
Starting to write CD/DVD at speed 2 in real SAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 02: 2231 of 2231 MB written (fifo 100%) [buf 90%] 2.4x.
Track 02: Total bytes read/written: 2340257792/2340257792 (1142704 sectors).
Writing time: 1374.246s
Average write speed 1.2x.
Min drive buffer fill was 80%
Fixating...
Fixating time: 55.033s
cdrecord-ProDVD: fifo had 36862 puts and 36862 gets.
cdrecord-ProDVD: fifo was 0 times empty and 28919 times full, min fill was 81%.
------------------------------------------------------------------------------------
Das Brennen von DVDRAM macht auch Probleme (ist tiereisch langsam 32-100 kb/s)
Aber das erspar ich uns hier erstmal....
Mainboard MSI, CPU: AMD Athlon(tm) XP 2400+
SCSI-Emulation ist aktiviert, ebenso DMA.
Wie gesagt, der DVD-Brenner ersetzt einen CDRW-Brenner, der CDRs locker mit
32facher Geschwindigkeit gebrannt hat.
Mir ist klar, dass hier das Problem mal wieder VOR der Tastatur liegt/sitzt, bin
allerdings etwas frustriert ob der erzielten Ergebnisse...
Vielen Dank schon mal im Voraus
Juergen