Hallo, meine D-Link DSC-350 wurde von SuSE 9.0 erkannt - mit Digikam kann ich Bilder von der Cam downloaden (leider nur als root). Unter Zapping bekomme ich die Info : "Sorry, but /dev/video, could not be opened" - weil Zapping wohl eine TV-Karte sucht (die ich aber nicht habe) Unter : http://spca50x.sourceforge.net/devices.html wird die Cam als working = Yes aufgelistet mit folgendem Zusatz : "Your camera is ONLY supported if both its Vendor and Device ID are claimed by the driver." Minton S-Cam F5 D-Link DSC-350 VENDOR ID 084d DEVICE ID 0003 lsusb gibt folgende Ausgabe: Bus 001 Device 001: ID 0000:0000 Bus 001 Device 003: ID 084d:0003 Minton Optic Industry Co., Inc. S-Cam F5 Nun habe ich unter http://sourceforge.net/projects/spca50x/ das modul fuer meinen Kernel (2.4.21) geholt, das enthaltene README gelesen und versucht, das Teil mit make zu installieren - auf eine einfaches make erhalte ich : *** No targets specified and no makefile found. Stop. auf ein make spca50x-0.30.o erhalte ich make: Nothing to be done for `spca50x-0.30.o'. Mir ist nicht klar, was zu installieren ist , denn auf http://sourceforge.net/ projects/spca50x/ ist nicht nur das Modul spca50x-module, sondern auch ein spca50x-src und ein sview-src zum Download angeboten. Wie kann ich weiter vorgehen ??? Danke im Voraus Gruss Claudia