Juergen Grete schrieb:
Hallo, o.g. DVD-Brenner soll CD-R,CD-RW,DVD-R, DVD+R, DVD-RW,DVD+RW und DVD-RAM brennen können - er tut's aber nicht (mit einer Ausnahme). Ich hab den bis dahin gut funktionierenden CD-Brenner ausgebaut und den LG4040B (GSA4040B) eingebaut. War ja schließlich der Testsieger bei "Linux User". Nun zu den Problemen (alle folgenden Ausgaben sind "simulate/dummy"):
- CD-R/RW brennen geht nicht. Ausgabe von cdrecord (Rohling CD-R Verbatim): ---------------------------------------------------------------------- # cdrdao simulate --device 0,0,0 --driver generic-mmc -n --speed 16 -v2 --eject mops-1.cue Cdrdao version 1.1.7-suse - (C) Andreas Mueller
SCSI interface library - (C) Joerg Schilling Paranoia DAE library - (C) Monty Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.
Using libscg version 'schily-0.7'
0,0,0: HL-DT-ST DVDRAM GSA-4040B Rev: A301 Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000)
Starting write simulation at speed 16... Process can be aborted with QUIT signal (usually CTRL-\). Turning BURN-Proof on cdrdao: Input/output error. : scsi sendcmd: no error CDB: 2A 00 FF FF FF 6A 00 00 1A 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 80 30 05 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.002s timeout 180s ERROR: Write data failed. ERROR: Simulation failed. ----------------------------------------------------------------------
- DVD-R brennen geht nicht. Ausgabe von cdrecord-ProDVD (Rohling DVD-R FUJIFILM): -----------------------------------------------------------------------------------------
# cdrecord-wrapper.sh speed=2 -dao -v dev=0,0,0 -dummy DVDimage.iso Cdrecord-ProDVD-Clone 2.01a12 (i586-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling Unlocked features: ProDVD Clone Limited features: This copy of cdrecord is licensed for: private/research/educational_non-commercial_use TOC Type: 1 = CD-ROM scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.25 Using libscg version 'schily-0.7' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVDRAM GSA-4040B' Revision : 'A301' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: DVD-R sequential recording Profile: DVD-RAM Profile: DVD-R sequential recording (current) Profile: DVD-RW sequential overwrite Profile: DVD-RW restricted overwrite Profile: DVD+RW Profile: DVD+R Profile: DVD-ROM Profile: CD-R Profile: CD-RW Profile: CD-ROM Profile: Removable Disk Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd). Driver flags : DVD MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1245184 = 1216 KB FIFO size : 4194304 = 4096 KB Track 01: data 2231 MB Total size: 2231 MB = 1142704 sectors Current Secsize: 2048 Total power on hours: 313315 cdrecord-ProDVD: Input/output error. log sense: scsi sendcmd: no error CDB: 4D 00 70 00 00 00 01 00 04 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 10 4D 00 00 0C 24 00 00 C0 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 (not valid) field ptr 0 cmd finished after 0.002s timeout 100s Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1155792 Starting to write CD/DVD at speed 2 in dummy SAO mode for single session. Last chance to quit, starting dummy write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Turning BURN-Free off Starting new track at sector: 0 Track 01: 0 of 2231 MB written. Hier abgebrochen nach 5min, da nix passierte --------------------------------------------------------------------------------------
- DVD+RW brennen funktioniert leidlich (speed nur 1.2x ), hier mal unsimuliert: --------------------------------------------------------------------------------------
# cdrecord-wrapper.sh -dao -v dev=0,0,0 DVDimage.iso Cdrecord-ProDVD-Clone 2.01a12 (i586-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling Unlocked features: ProDVD Clone Limited features: This copy of cdrecord is licensed for: private/research/educational_non-commercial_use TOC Type: 1 = CD-ROM scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.25 Using libscg version 'schily-0.7' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVDRAM GSA-4040B' Revision : 'A301' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: DVD+RW Profile: DVD-RAM Profile: DVD-R sequential recording Profile: DVD-RW sequential overwrite Profile: DVD-RW restricted overwrite Profile: DVD+RW (current) Profile: DVD+R Profile: DVD-ROM Profile: CD-R Profile: CD-RW Profile: CD-ROM Profile: Removable Disk Using generic SCSI-3/mmc-3 DVD+RW driver (mmc_dvdplusrw). Driver flags : DVD MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 983040 = 960 KB FIFO size : 4194304 = 4096 KB Track 01: data 2231 MB Total size: 2231 MB = 1142704 sectors Current Secsize: 2048 Trying to clear drive status. Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 1152400 Starting to write CD/DVD at speed 2 in real SAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Starting new track at sector: 0 Track 02: 2231 of 2231 MB written (fifo 100%) [buf 90%] 2.4x. Track 02: Total bytes read/written: 2340257792/2340257792 (1142704 sectors). Writing time: 1374.246s Average write speed 1.2x. Min drive buffer fill was 80% Fixating... Fixating time: 55.033s cdrecord-ProDVD: fifo had 36862 puts and 36862 gets. cdrecord-ProDVD: fifo was 0 times empty and 28919 times full, min fill was 81%. ------------------------------------------------------------------------------------
Das Brennen von DVDRAM macht auch Probleme (ist tiereisch langsam 32-100 kb/s) Aber das erspar ich uns hier erstmal....
Mainboard MSI, CPU: AMD Athlon(tm) XP 2400+ SCSI-Emulation ist aktiviert, ebenso DMA. Wie gesagt, der DVD-Brenner ersetzt einen CDRW-Brenner, der CDRs locker mit 32facher Geschwindigkeit gebrannt hat. Mir ist klar, dass hier das Problem mal wieder VOR der Tastatur liegt/sitzt, bin allerdings etwas frustriert ob der erzielten Ergebnisse...
Vielen Dank schon mal im Voraus
Juergen
Nu geht's! Ich kann noch nicht sagen warum, aber er brennt :-) Die Änderung, die es letztlich gebracht hat war der Ausbau des am gleichen Kabel hängenden DVD-ROM (Samsung) und jumpern des 4040B als Slave. Jetzt sitzen also ein CD-Brenner (Master) und ein DVD-Brenner(Slave) an einem IDE-Port. Ich glaube kaum, daß ich die eigentliche Ursache gefunden habe, habe aber auch keine große Lust auf weiteres Experimentieren... Danke für alle Hinweise Juergen