Hallo,
wie hast Du denn das Rad der USB-Maus zum Laufen bekommen? [...]
Wie sieht Dein Eintrag in XF86Config aus?
Ich habe meine XF86Config angehängt.
Laeuft Dein Suspend2Ram UND Suspend2Disk unter ACPI? Was hast Du denn
nach der Installation an Aenderungen vorgenommen?
Nein, ich nutze APM, schon allein, weil die Inspiron 8xxx eine allzu schlechte ACPI-Unterstützung haben und die Linux-ACPI-Unterstützung auch noch nicht vollständig ist.
Mit APM habe ich mit dem Original-Kernel wie mit meinem eigenen *keine* Probleme!
Gruss, TJ
Meine XF86Config (Geforce2Go, 1600x1200 und geringere Auflösungen, Touchpad und Wheelmouse):
# /.../
# SaX generated XFree86 config file
# Created on: 2002-05-24.
#
# Version: 4.3
# Contact: Marcus Schaefer , 2001
#
# Automatically generated by [SaX2] (4.3)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
[wechgeschnippelt]
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "pex5"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
Load "xie"
EndSection
Section "InputDevice"
Driver "keyboard"
Identifier "Keyboard[0]"
Option "AutoRepeat" "400 30"
Option "LeftAlt" "Meta"
Option "Protocol" "Standard"
Option "RightAlt" "Meta"
Option "RightCtl" "Control"
Option "ScrollLock" "Compose"
Option "XkbKeyCodes" "xfree86"
Option "XkbLayout" "de"
Option "XkbModel" "pc105"
Option "XkbRules" "xfree86"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
# Option "ButtonNumber" "5"
Option "Device" "/dev/mouse"
Option "InputFashion" "Mouse"
Option "Name" "MouseMan Traveller"
Option "Protocol" "IMPS/2"
Option "Vendor" "LOGITECH"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[3]"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "on"
Option "Emulate3Timeout" "50"
Option "InputFashion" "Mouse"
Option "Mode" "Relative"
Option "Name" "PS/2 MOUSE"
Option "Protocol" "GlidePointPS/2"
Option "Type" "Finger"
Option "Vendor" "Synaptics"
EndSection
Section "Monitor"
Option "CalcAlgorithm" "IteratePrecisely"
HorizSync 29-95
Identifier "BuildInLCDMonitor"
ModelName "1600X1200@75HZ"
VendorName "--> LCD"
VertRefresh 58-82
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1280x1024" 105.64 1280 1296 1552 1664 1024 1024 1034 1070
Modeline "1280x1024" 127.80 1280 1296 1552 1664 1024 1024 1035 1070
Modeline "1280x1024" 144.83 1280 1296 1552 1664 1024 1024 1037 1070
Modeline "1024x768" 63.23 1024 1040 1216 1328 768 768 775 802
Modeline "1024x768" 76.49 1024 1040 1216 1328 768 768 776 802
Modeline "1024x768" 86.69 1024 1040 1216 1328 768 768 778 802
Modeline "800x600" 38.69 800 816 928 1040 600 600 606 626
Modeline "800x600" 46.80 800 816 928 1040 600 600 606 626
Modeline "800x600" 53.04 800 816 928 1040 600 600 607 626
Modeline "640x480" 24.76 640 656 720 832 480 480 484 501
Modeline "640x480" 29.95 640 656 720 832 480 480 485 501
Modeline "640x480" 33.95 640 656 720 832 480 480 486 501
Modeline "1400x1050" 129 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
EndSection
Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "1600x1200" "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1600x1200" "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
Device "Geforce2Go"
Identifier "Screen[0]"
Monitor "BuildInLCDMonitor"
EndSection
Section "Device"
BoardName "GeForce2 Go"
BusID "1:0:0"
Driver "nvidia"
Identifier "GeForce2Go"
Option "dpms"
Option "FlatPanel"
Option "IgnoreEDID" "off"
Option "NoLogo" "on"
Option "NvAGP" "0"
Option "HWCursor" "on"
Option "CursorShadow" "on"
Screen 0
VendorName "Nvidia"
Videoram 32768
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
InputDevice "Mouse[3]" "SendCoreEvents"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection