Hallo liebe Linuxgemeinde, ich wollte Drillisch@Internet als Backup InetZugang bei mir einrichten. Nun habe ich zwei Fragen: 1. Ich kann Drillisch@Internet anwählen aber er haut mich direkt wieder raus. Folgendes wird mir in /var/log/messages angezeigt: ---schnipp--- May 4 10:23:16 LinuxServer kernel: ippp1: dialing 0 0100500192134... May 4 10:23:16 LinuxServer isdnlog: May 04 10:23:16 * tei 69 calling +49 100500 192, with LinuxServer RING (Data) May 4 10:23:17 LinuxServer isdnlog: May 04 10:23:17 tei 69 calling +49 10050019 2, with LinuxServer Time:Thu May 4 10:23:00 2000 May 4 10:23:17 LinuxServer isdnlog: May 04 10:23:17 tei 69 calling +49 10050019 2, with LinuxServer CONNECT (Data) May 4 10:23:17 LinuxServer isdnlog: May 04 10:23:17 tei 69 calling +49 10050019 2, with LinuxServer ABC_LCR: Request for number +49100500192134 = +49 10050019 2 - (DE) via DTAG May 4 10:23:17 LinuxServer isdnlog: May 04 10:23:17 tei 69 calling +49 10050019 2, with LinuxServer ABC_LCR: New number "010510100500192" (via 01051:01051) ( but ABC_LCR not installed - simulation) May 4 10:23:17 LinuxServer isdnlog: May 04 10:23:17 tei 69 calling +49 10050019 2, with LinuxServer CHARGE: 0.120 DM/90s = 0.080 DM/Min (DTAG, Ortszone, Werkt ag (Donnerstag), Standard) May 4 10:23:17 LinuxServer isdnlog: May 04 10:23:17 tei 69 calling +49 10050019 2, with LinuxServer HINT: Better use 01030:TelDaFax, 0.001 DM/1s = 0.070 DM/Mi n, saving 0.024 DM/Min May 4 10:23:17 LinuxServer isdnlog: May 04 10:23:17 tei 69 calling +49 10050019 2, with LinuxServer 1.CI 0.120 DM (now) May 4 10:23:17 LinuxServer isdnlog: May 04 10:23:17 tei 69 calling +49 10050019 2, with LinuxServer NEXT CI AFTER 01:30 (DTAG, Ortszone, Werktag (Donnerstag), Standard) May 4 10:23:18 LinuxServer ipppd[3837]: Local number: 8599800, Remote number: 0 100500192134, Type: outgoing May 4 10:23:18 LinuxServer ipppd[3837]: PHASE_WAIT -> PHASE_ESTABLISHED, ifunit : 1, linkunit: 0, fd: 8 May 4 10:23:18 LinuxServer kernel: isdn_net: ippp1 connected May 4 10:23:18 LinuxServer kernel: isdn_net: chargetime of ippp1 now 5203323 May 4 10:23:18 LinuxServer isdnlog: May 04 10:23:18 tei 69 calling +49 10050019 2, with LinuxServer Normal call clearing (User) May 4 10:23:18 LinuxServer kernel: ippp1: remote hangup May 4 10:23:18 LinuxServer kernel: ippp1: Chargesum is 0 May 4 10:23:18 LinuxServer ipppd[3837]: Modem hangup May 4 10:23:18 LinuxServer ipppd[3837]: Connection terminated. May 4 10:23:18 LinuxServer ipppd[3837]: taking down PHASE_DEAD link 0, linkunit : 0 May 4 10:23:18 LinuxServer ipppd[3837]: closing fd 8 from unit 0 May 4 10:23:18 LinuxServer ipppd[3837]: link 0 closed , linkunit: 0 May 4 10:23:18 LinuxServer ipppd[3837]: reinit_unit: 0 May 4 10:23:18 LinuxServer ipppd[3837]: Connect[0]: /dev/ippp1, fd: 8 May 4 10:23:18 LinuxServer kernel: ippp_ccp: freeing reset data structure c16ed 000 May 4 10:23:18 LinuxServer kernel: ippp, open, slot: 1, minor: 1, state: 0000 May 4 10:23:18 LinuxServer kernel: ippp_ccp: allocated reset data structure c16 ed000 May 4 10:23:18 LinuxServer isdnlog: May 04 10:23:18 tei 69 calling +49 10050019 2, with LinuxServer HINT: Cheapest booked 01030:TelDaFax 0.002 DM (would save 0.118 DM) May 4 10:23:18 LinuxServer isdnlog: May 04 10:23:18 tei 69 calling +49 10050019 2, with LinuxServer HINT: Overall cheapest 01050:Talkline BusinessLine Local 0 .002 DM (would save 0.118 DM) May 4 10:23:18 LinuxServer isdnlog: May 04 10:23:18 tei 69 calling +49 10050019 2, with LinuxServer HINT: LCR:FAILED May 4 10:23:18 LinuxServer isdnlog: May 04 10:23:18 tei 69 calling +49 10050019 2, with LinuxServer HANGUP (1 CI 0.120 DM 0:00:01 I=371.0 b O=163.0 b) ---schnapp--- Ich vermutete, das etwas mit dem Passwort nicht stimmt, da man ja keines braucht (yast aber unbedingt eines eintragen will). Ich habe das Interface ippp1 mit yast eingerichtet und per Hand das Passwort aus /etc/ppp/pap-secrets gelöscht. Dann habe ich '/sbin/init.d/i4l start' (ohne ' ') ausgeführt. Wenn ich dann ippp1 per Hand startete war das Interface kurz online und dann sehr schnell wieder offline :-( siehe oben Auszug aus /var/log/messages). Was mache ich falsch? 2. Wie kann ich es automatisieren, das ippp1 gewählt wird wenn eine Verbingung mit ippp0 nicht zustande kommt? Vielen Dank für Eure Hilfe Ciao Frank -- Frank@Wening.com http://www.wening.com RegLinuxUser #141365