January 2005 - openSUSE ISDN (Deutsch)

asterisk
by Daniel Bauer 04 Jan '05

04 Jan '05

Hallo Zusammen, ich habe mir asterisk 1.0.2 "installiert" und kann dies auch starten, leider hänge ich aber ganz massiv an der Konfiguration. Der Server hat eine einfache ISDN Karte mit HISAX Treiber und sonst nichts (Soundkarte usw.), ich möchte ihn nur als Telefonanlage betreiben. Dabei würde ich gerne die eingehenden Gespräche auf dem ISDN Kanal an einen anderen asterisk Server leiten und von dort aus wieder auf dem dortigen ISDN Kanal ausgeben und das ganze umgekehrt. Toll wärs auch noch wenn der Server sich mit einem SIP Acc. verbinden würde und die Gespräche von dort auf den ISDN Kanal weiterleiten würde. Das es möglich ist wurde mir schon mitgeteilt nur leider fehlt mir jeglicher Lösungsansatz und ich komme mit Englisch nicht so gut zurecht, als das ich aus dem asterisk Handbuch bzw. der Mailinglist schlau werde. Hat jemand asterisk am laufen, vielleicht sogar in einem ähnlichen Szenario? Ich bin für jeden Hinweis und Tip dankbar. Daniel

2 1

Re: [suse-isdn] Probleme mit Hisax-Treiber fuer Sitecom DC-104
by Philipp Neudecker 03 Jan '05

03 Jan '05

Hallo Ingo, > komisch, USB-Geräte sollten hotplug laufen... Grundsaetzlich denke ich das auch, aber wenn ich die ISDN-Karte in YaST->ISDN als Hotplug einstelle, wird das Hisax-Modul beim Boot nicht geladen ("Setting up ISDN card contr0 SGST ST5481 USB Adapter - skipped"). Folgerichtig bricht das beim Booten gestartete ifup ippp0 mit "ERROR: no ISDN device available" ab, unabhaegig davon ob ich das Provider-Interface in YaST->ISDN als Boot oder Hotplug konfiguriere. Auch aus- und einstoepseln des USB-Kabels bringt nix. Allerdings kann ich das ganze noch manuell starten: rcisdn start ifup ippp0 Das ist aber alles nebensaechlich, weil das Einwaehlproblem eben essentiellerer Natur ist... > Kann sein ich lieg total daneben weil die andere Fehlermeldung obendran > den Fehler erst verusacht, aber "cause: E001B" bedeutet laut "man > isdn_cause" "Destination out of order." Das kann aber meines Wissens alles Moegliche bedeuten... Weiss eigentlich jemand, ob der SGS Thomson ST5481 Hisax Treiber, den YaST fuer mich auswaehlt, fuer ein Sitecom DC-104 ueberhaupt der richtige Treiber ist? Die WWW-Seite von Sitecom war leider nicht sehr informativ... Unter 2.4.X Kernels hat das dumme Ding ja gearbeitet, ich weiss leider nicht mehr mit welchem Treiber. > Das Problem hatte ich noch nicht, ich hatte aber einen Hardwaredefekt > zeitgleich zu ner Neuinstallation und dachte erst es liegt an der > Software :-( > Hat das mit exakt gleicher Hardware, also auch Anbindung an das > ISDN-Netz, unter SUSE 9.0 funktioniert? Würde dann erst mal schauen ob > die Hardware bzw. dein ISDN-Bus noch OK ist (wenn du SUSE 9.0 noch hast). Danke fuer den Tip, aber unter einem von uns allen geliebten Betriebssystem aus Redmond, WA funktioniert alles, also glaube ich nicht an Hardwareprobleme. Da ich meine ganze wissenschaftliche Anwendungssoftware schon installiert habe, habe ich auch nicht genug Zeit, erst wieder 9.0 und dann wieder 9.2 zu installieren, das kostet mich 'ne Woche, oder gibt es eine Moeglichkeit, auch ohne freie Partition ein 9.0 zum Testen parallel zu 9.2 zu installieren? Viele Gruesse, Philipp __________________________________________________________ Mit WEB.DE FreePhone mit hoechster Qualitaet ab 0 Ct./Min. weltweit telefonieren! http://freephone.web.de/?mc=021201

1 0

Fritzcard PCI capi - Kanalb�ndelung
by newsmail＠hoerst.net 03 Jan '05

03 Jan '05

Hallo ! Gestern abend habe ich mal probiert Kanalbündelung (ISDN) auf meiner Kiste zum laufen zu bringen. laeuft alles aber => Warnmeldungen ohne Ende und nach geraumer Zeit bleibt die Kiste haengen :-( Dec 15 20:42:41 capricorn kernel: [<c01283dc>] local_bh_enable+0x5c/0x80 Dec 15 20:42:41 capricorn kernel: [<f51811eb>] isdn_ppp_xmit+0xfb/0x820 [isdn] Dec 15 20:42:41 capricorn kernel: [<f52701a1>] LeaveCritical+0x11/0x20 [fcpci] Dec 15 20:42:41 capricorn kernel: [<f51709a3>] isdn_net_xmit+0x153/0x1f0 [isdn] Dec 15 20:42:41 capricorn kernel: [<f5273388>] _Q_Enqueue+0x38/0x60 [fcpci] Dec 15 20:42:41 capricorn kernel: [<f527368e>] B2_Enqueue32+0x1e/0x30 [fcpci] Dec 15 20:42:41 capricorn kernel: [<f5170c16>] isdn_net_start_xmit+0xb6/0x360 [ isdn] Dec 15 20:42:41 capricorn kernel: [<c02d793b>] qdisc_restart+0xfb/0x230 Dec 15 20:42:41 capricorn kernel: [<c02c934e>] net_tx_action+0xbe/0x150 Dec 15 20:42:41 capricorn kernel: [<f5270d70>] BIrqHandler+0x110/0x120 [fcpci] Dec 15 20:42:41 capricorn kernel: [<c01282c2>] __do_softirq+0x62/0xe0 Dec 15 20:42:41 capricorn kernel: [<c012836d>] do_softirq+0x2d/0x40 Dec 15 20:42:41 capricorn kernel: [<c010a286>] do_IRQ+0x126/0x160 Dec 15 20:42:41 capricorn kernel: [<c0108098>] common_interrupt+0x18/0x20 Dec 15 20:42:41 capricorn kernel: Badness in local_bh_enable at kernel/softirq.c :141 Wenn ich nur einen ISDN Kanal benutze gehts.. Hardware 2x P3 500 / 812MB / Fritz PCI (normal) Ciao Gerd

3 5

Probleme mit Hisax-Treiber fuer Sitecom DC-104
by Philipp Neudecker 03 Jan '05

03 Jan '05

Hallo, Ich habe eine Stidecom DC-104 USB ISDN Karte, die unter SuSE 9.0 (Kernel 2.4.X) anstandslos lief, jedoch nicht mehr unter SuSE 9.2. Es wird laut hwinfo als SGS Thomson ST5481 erkannt: 36: USB 00.0: 10300 ISDN Adapter [Created at usb.118] Unique ID: hSuP.5oXUjPXc4fC Parent ID: pBe4.bdprirykxw7 SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0 SysFS BusID: 2-2:1.0 Hardware Class: isdn adapter Model: "SGST ST5481 USB Adapter" Hotplug: USB Vendor: usb 0x0483 "SGS Thomson Microelectronics" Device: usb 0x4810 "USB ISDN modem" Revision: "1.50" Driver: "st5481_usb" Speed: 1.5 Mbps Requires: i4l-base, i4l-isdnlog Driver Info #0: I4L Type: 1001/1 [SGST ST5481 USB Adapter] Config Status: cfg=yes, avail=yes, need=no, active=unknown Attached to: #34 (Hub) Urspruenglich verwendete ich den Startmodus Hotplug, da lief gar nichts. Seit ich dies zu Boot aenderte, werden das Kernel Modul hisax_st5481 (und auch isdn, slhc, isdnhdlc, crc_ccitt) gestarted und die Stromversorgungs-LED der ISDN-Karte leuchtet. Einwaehlversuche mit kinternet scheitern jedoch mit Fehlermeldungen in der dmesg (ganz unten): Linux version 2.6.8-24.10-default (geeko@buildhost) (gcc version 3.3.4 (pre 3.3.5 20040809)) #1 Wed Dec 22 11:54:27 UTC 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff70000 (usable) BIOS-e820: 000000001ff70000 - 000000001ff79000 (ACPI data) BIOS-e820: 000000001ff79000 - 000000001ff80000 (ACPI NVS) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) 502MB vmalloc/ioremap area available. 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 130928 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126832 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f6a10 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1ff741e7 ACPI: FADT (v001 INTEL SPDG 0x06040000 PTL 0x00000003) @ 0x1ff78f14 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1ff78f88 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1ff78fd8 ACPI: DSDT (v001 WIST K2P 0x06040000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: local apic disabled Built 1 zonelists Kernel command line: root=/dev/hda4 vga=0x317 selinux=0 resume=/dev/hda3 desktop elevator=as splash=verbose bootsplash: verbose mode. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 2793.358 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 513484k/523712k available (2076k kernel code, 9560k reserved, 780k data, 212k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 5537.79 BogoMIPS (lpj=2768896) Security Scaffold v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled CPU: Intel Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: Looking for DSDT in initrd... not found! ACPI: IRQ9 SCI: Edge set to Level Trigger. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 1148k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd822, last bus=3 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040715 exfldio-0194: *** Warning: The ACPI AML in your computer contains errors, please nag the manufacturer to correct it. exfldio-0197: *** Warning: Allowing relaxed access to fields; turn on CONFIG_ACPI_DEBUG for details. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11 14 15) ACPI: Embedded Controller [EC] (gpe 28) Linux Plug and Play Support v0.97 (c) Adam Belay PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 ACPI: PCI interrupt 0000:03:04.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 ACPI: PCI interrupt 0000:03:04.1[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:03:04.2[C] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 ACPI: PCI interrupt 0000:03:04.3[D] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:03:05.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:03:06.0[A] -> GSI 11 (level, low) -> IRQ 11 TC classifier action (bugs to netdev(a)oss.sgi.com cc hadi(a)cyberus.ca) Simple Boot Flag at 0x36 set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1104734219.654:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API vesafb: framebuffer at 0xe0000000, mapped to 0xe0880000, using 6144k, total 65536k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:f5f0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 35007 bytes,<6>...found (1024x768, 21643 bytes, v3). Console: switching to colour frame buffer device 127x43 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 10 (level, low) -> IRQ 10 Using anticipatory io scheduler floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x2060-0x2067, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x2068-0x206f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: IC25N060ATMR04-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: DVD+RW RW8160, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 1024KiB hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 > hda3 hda4 ide-floppy driver 0.99.newide mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 Synaptics Touchpad, model: 1 Firmware: 5.8 180 degree mounted touchpad Sensor: 18 new absolute packet format Touchpad has extended capability bits -> 4 multi-buttons, i.e. besides standard buttons -> multifinger detection -> palm detection input: SynPS/2 Synaptics TouchPad on isa0060/serio4 input: PC Speaker md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 8 NET: Registered protocol family 20 PM: Reading pmdisk image. swsusp: Resume From Partition: /dev/hda3 <3>swsusp: Invalid partition type. pmdisk: Error -22 resuming PM: Resume from disk failed. ACPI: (supports S0 S3 S4 S5) ACPI wakeup devices: SLPB LID0 PCIB LANC MODM USB1 USB2 USB3 USB4 EUSB md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 212k freed Adding 522104k swap on /dev/hda3. Priority:42 extents:1 EXT3 FS on hda4, internal journal usbcore: registered new driver usbfs usbcore: registered new driver hub md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm(a)uk.sistina.com kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. subfs 0.9 evdev_connect: evdev cdffc580 handle cdffc59c name event0 evdev_connect: evdev c14d6a80 handle c14d6a9c name event1 evdev_connect: evdev c14d6980 handle c14d699c name event2 USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 11, io base 00001cc0 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.8-24.10-default uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 10, io base 00001ce0 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.8-24.10-default uhci_hcd usb usb2: SerialNumber: 0000:00:1d.1 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 11, io base 00002000 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.8-24.10-default uhci_hcd usb usb3: SerialNumber: 0000:00:1d.2 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.3: UHCI Host Controller usb 1-1: new full speed USB device using address 2 usb 1-1: Product: USB DRIVE usb 1-1: Manufacturer: MEDION usb 1-1: SerialNumber: 0196631972644 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: irq 11, io base 00002020 uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.8-24.10-default uhci_hcd usb usb4: SerialNumber: 0000:00:1d.3 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-2: new low speed USB device using address 3 usb 1-2: Product: USB Scroll Mouse usb 1-2: Manufacturer: ARESON usb 2-1: new full speed USB device using address 2 usb 2-1: Product: USB Floppy Drive usb 2-1: Manufacturer: Sony usb 2-2: new full speed USB device using address 3 usb 2-2: Product: USB ISDN modem hw_random hardware driver 1.0.0 loaded ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 10, pci mem e0824000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 usb usb5: Product: EHCI Host Controller usb usb5: Manufacturer: Linux 2.6.8-24.10-default ehci_hcd usb usb5: SerialNumber: 0000:00:1d.7 usb 2-1: USB disconnect, address 2 hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected usb 2-2: USB disconnect, address 3 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 865 Chipset. agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 128M @ 0x28000000 usb 1-1: USB disconnect, address 2 usb 1-2: USB disconnect, address 3 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 8192kB Cache Uniform CD-ROM driver Revision: 3.20 SCSI subsystem initialized st: Version 20040403, fixed bufsize 32768, s/g segs 256 usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver Linux Kernel Card Services options: [pci] [cardbus] [pm] ACPI: PCI interrupt 0000:03:04.0[A] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:03:04.0 [17c0:17c0] Yenta: ISA IRQ mask 0x00f8, PCI irq 11 Socket status: 30000006 ACPI: PCI interrupt 0000:03:04.1[B] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:03:04.1 [17c0:17c0] Yenta: ISA IRQ mask 0x00f8, PCI irq 11 Socket status: 30000006 Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usb 1-1: new full speed USB device using address 4 usb 1-1: Product: USB DRIVE usb 1-1: Manufacturer: MEDION usb 1-1: SerialNumber: 0196631972644 scsi0 : SCSI emulation for USB Mass Storage devices Vendor: MEDION Model: USB DRIVE Rev: 1.12 Type: Direct-Access ANSI SCSI revision: 02 8139too Fast Ethernet driver 0.9.27 ACPI: PCI interrupt 0000:03:05.0[A] -> GSI 10 (level, low) -> IRQ 10 eth0: RealTek RTL8139 at 0xe10be800, 00:0a:e4:02:b7:4a, IRQ 10 eth0: Identified 8139 chip type 'RTL-8101' SCSI device sda: 125952 512-byte hdwr sectors (64 MB) sda: Write Protect is off sda: Mode Sense: 23 00 00 00 sda: assuming drive cache: write through sda: sda1 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 USB Mass Storage device found at 4 usb 1-2: new low speed USB device using address 5 usb 1-2: Product: USB Scroll Mouse usb 1-2: Manufacturer: ARESON ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1223 $ Ben Collins <bcollins(a)debian.org> ACPI: PCI interrupt 0000:03:04.2[C] -> GSI 10 (level, low) -> IRQ 10 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d2007000-d20077ff] Max Packet=[2048] evdev_connect: evdev cdec2180 handle cdec219c name event3 input: USB HID v1.10 Mouse [ARESON USB Scroll Mouse] on usb-0000:00:1d.0-2 usb 2-1: new full speed USB device using address 4 usb 2-1: Product: USB Floppy Drive usb 2-1: Manufacturer: Sony scsi1 : SCSI emulation for USB Mass Storage devices Vendor: SONY Model: USB-FDU Rev: 5.01 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0 scsi: unknown device type 31 Vendor: SONY Model: USB-FDU Rev: 5.01 Type: Unknown ANSI SCSI revision: 02 Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 1, type 31 scsi: unknown device type 31 Vendor: SONY Model: USB-FDU Rev: 5.01 Type: Unknown ANSI SCSI revision: 02 Attached scsi generic sg3 at scsi1, channel 0, id 0, lun 2, type 31 scsi: unknown device type 31 Vendor: SONY Model: USB-FDU Rev: 5.01 Type: Unknown ANSI SCSI revision: 02 Attached scsi generic sg4 at scsi1, channel 0, id 0, lun 3, type 31 scsi: unknown device type 31 Vendor: SONY Model: USB-FDU Rev: 5.01 Type: Unknown ANSI SCSI revision: 02 Attached scsi generic sg5 at scsi1, channel 0, id 0, lun 4, type 31 scsi: unknown device type 31 Vendor: SONY Model: USB-FDU Rev: 5.01 Type: Unknown ANSI SCSI revision: 02 Attached scsi generic sg6 at scsi1, channel 0, id 0, lun 5, type 31 scsi: unknown device type 31 Vendor: SONY Model: USB-FDU Rev: 5.01 Type: Unknown ANSI SCSI revision: 02 Attached scsi generic sg7 at scsi1, channel 0, id 0, lun 6, type 31 scsi: unknown device type 31 Vendor: SONY Model: USB-FDU Rev: 5.01 Type: Unknown ANSI SCSI revision: 02 Attached scsi generic sg8 at scsi1, channel 0, id 0, lun 7, type 31 USB Mass Storage device found at 4 ieee1394: Host added: ID:BUS[0-00:1023] GUID[000ae4033800162c] usb 2-2: new full speed USB device using address 5 usb 2-2: Product: USB ISDN modem BIOS EDD facility v0.16 2004-Jun-25, 2 devices found CSLIP: code copyright 1989 Regents of the University of California cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0820-0x08ff: clean. cs: IO port probe 0x0800-0x080f: clean. cs: IO port probe 0x03e0-0x04ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x0100-0x03af: excluding 0x378-0x37f cs: IO port probe 0x0a00-0x0aff: clean. Loaded prism54 driver, version 1.2 ACPI: PCI interrupt 0000:03:06.0[A] -> GSI 11 (level, low) -> IRQ 11 ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (module) HiSax: Layer1 Revision 2.46.2.5 HiSax: Layer2 Revision 2.30.2.4 HiSax: TeiMgr Revision 2.20.2.3 HiSax: Layer3 Revision 2.22.2.3 HiSax: LinkLayer Revision 2.59.2.4 hisax_st5481: ST5481 USB ISDN driver $Revision: 2.4.2.3 $ st541: found adapter VendorId 0483, ProductId 4810, LEDs 2 st5481_setup_usb: HiSax: Card 1 Protocol EDSS1 Id=st5481_usb0 (0) HiSax: DSS1 Rev. 2.32.2.3 HiSax: 2 channels added HiSax: MAX_WAITING_CALLS added usb_next_ctrl_msg: request=0x06,value=0x0000,index=0 usbcore: registered new driver st5481_usb usb_next_ctrl_msg: request=0x1e,value=0x0000,index=0 usb_next_ctrl_msg: request=0x20,value=0x000d,index=0 usb_next_ctrl_msg: request=0x21,value=0x0029,index=0 usb_next_ctrl_msg: request=0x22,value=0x0014,index=0 usb_next_ctrl_msg: request=0x52,value=0x0001,index=0 usb_next_ctrl_msg: request=0x53,value=0x0080,index=0 usb_next_ctrl_msg: request=0x42,value=0x0006,index=0 usb_next_ctrl_msg: request=0x43,value=0x0014,index=0 usb_next_ctrl_msg: request=0x46,value=0x0006,index=0 usb_next_ctrl_msg: request=0x47,value=0x0014,index=0 usb_next_ctrl_msg: request=0x4a,value=0x0070,index=0 usb_next_ctrl_msg: request=0x56,value=0x0007,index=0 usb_int_complete: length=6,data=400000007080 NET: Registered protocol family 10 Disabled Privacy Extensions on device c037f760(lo) IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (4091 buckets, 32728 max) - 336 bytes per conntrack ip6_conntrack version 0.1 (4091 buckets, 32728 max) - 208 bytes per conntrack ippp, open, slot: 0, minor: 0, state: 0000 ippp_ccp: allocated reset data structure dec54000 eth1: islpci_open() eth1: resetting device... eth1: uploading firmware... prism54: request_firmware() failed for 'isl3890' eth1: could not upload firmware ('isl3890') Disabled Privacy Extensions on device dd175c00(sit0) usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 180112 usecs intel8x0: clocking to 48000 ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Lid Switch [LID0] ACPI: Processor [CPU0] (supports C1 C2, 8 throttling states) ACPI: Thermal Zone [THM0] (42 C) cpufreq: Intel(R) SpeedStep(TM) for this chipset not (yet) available. powernow: This module only works with AMD K7 CPUs module nvidia unsupported by SUSE/Novell, tainting kernel. nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6629 Wed Nov 3 13:12:51 PST 2004 agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode parport0: PC-style at 0x378 [PCSPP,TRISTATE] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode lp0: using parport0 (polling). drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic usbcore: registered new driver usbserial_generic usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 Non-volatile memory driver v1.2 usb_int_complete: length=6,data=400000007880 usb_int_complete: length=6,data=400000007c80 usb_next_ctrl_msg: request=0x4c,value=0x00fc,index=0 st5481_usb_pipe_reset: pipe=87 drivers/isdn/hisax/st5481_usb.c:st5481_start_rcv: usb_submit_urb failed,status=-22 drivers/isdn/hisax/st5481_usb.c:st5481_start_rcv: usb_submit_urb failed,status=-22 st5481_usb_pipe_reset: pipe=06 usb_next_ctrl_msg: request=0x01,value=0x0000,index=87 usb_next_ctrl_msg: request=0x36,value=0x0010,index=0 usb_next_ctrl_msg: request=0x01,value=0x0000,index=6 usb_next_ctrl_msg: request=0x53,value=0x00c0,index=0 usb_int_complete: length=6,data=008000007cc0 usb_int_complete: length=6,data=4000000070c0 usb_next_ctrl_msg: request=0x36,value=0x0000,index=0 usb_next_ctrl_msg: request=0x53,value=0x0080,index=0 usb_int_complete: length=6,data=400000007880 usb_int_complete: length=6,data=400000007c80 usb_next_ctrl_msg: request=0x4c,value=0x00fc,index=0 st5481_usb_pipe_reset: pipe=87 drivers/isdn/hisax/st5481_usb.c:st5481_start_rcv: usb_submit_urb failed,status=-22 drivers/isdn/hisax/st5481_usb.c:st5481_start_rcv: usb_submit_urb failed,status=-22 st5481_usb_pipe_reset: pipe=06 usb_next_ctrl_msg: request=0x01,value=0x0000,index=87 usb_next_ctrl_msg: request=0x36,value=0x0010,index=0 usb_next_ctrl_msg: request=0x01,value=0x0000,index=6 usb_next_ctrl_msg: request=0x53,value=0x00c0,index=0 usb_int_complete: length=6,data=008000007cc0 FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! ippp0: dialing 1 0191011... drivers/isdn/hisax/st5481_d.c:dout_start_xmit: usb_submit_urb failed,status=-22 isdn: st5481_usb0,ch0 cause: E001B isdn_net: local hangup ippp0 ippp0: Chargesum is 0 FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Hatte schon mal jemand das gleiche Problem und/oder eine Idee, was man tun kann? Viele Gruesse, Philipp __________________________________________________________ Mit WEB.DE FreePhone mit hoechster Qualitaet ab 0 Ct./Min. weltweit telefonieren! http://freephone.web.de/?mc=021201

2 1

HylaFax - MSN-Auswahl beim versenden
by Swantje & Michael Ludwig 02 Jan '05

02 Jan '05

Hallo Liste, ich habe mit meinem HylaFax folgendes Problem: Bisher sendete und empfing ich nur auf einer MSN, möchte das ganze jetzt aber auf zwei MSNs ausweiten. Die Konfiguration bestand bisher aus den beiden Dateien /var/spool/fax/etc/config.c2fax sowie /var/spool/fax/etc/config.faxCAPI . Nun möchte ich also eine weitere Fax-Nummer (ein- und ausgehend!) hinzufügen. Im Netz habe ich dazu leider recht wenig gefunden. Also - ich habe nun einfach in die config.faxCAPI eine neue "Section" sowie deren "SubSection" eingebaut und die entsprechenden Einträge für die MSN usw. eingetragen. Danach habe ich den c2faxrecv-Prozess neu gestartet und den hfaxd ebenso. c2faxrecv sagt: ========================================================== stargate:~ # stargate:~ # c2faxrecv -v Device "faxCAPI" uses 2 receive thread(s) with the following config: Controller=1 : IncomingMSNs=24 Device "faxCAPI2" uses 2 receive thread(s) with the following config: Controller=1 : IncomingMSNs=22 Started in Hylafax mode and waiting on incoming calls. stargate:~ # stargate:~ # ========================================================== Und faxstat sagt: ========================================================== stargate:~ # stargate:~ # faxstat HylaFAX scheduler on stargate.swami.net: Running Modem faxCAPI (+49.4xxx.xxxxxxx): Running and idle stargate:~ # stargate:~ # ========================================================== Die ausge-x-te Nummer ist die neue Nummer, die ich als "FaxNumber: " in der config.faxCAPI eingetragen habe. Was mich schon hier wundert: c2faxrecv "sieht" beide devices, faxCAPI sowie faxCAPI2. faxstat spricht allerdings nur von faxCAPI - allerdings mit der neuen MSN, faxCAPI ist allerdings die section mit der alten MSN, die ja bisher ordentlich lief!! ;-) Als Client-Programm verwende ich SuSEFAX auf 9.2-Clients. Wie kann ich auswählen, über welche MSN ich ausgehend faxe??? Das leuchtet mir überhaupt nicht ein, bitte Hilfe!! ;-) Grüsse, Michael

1 0

Stollmann TA und CAPI
by Gerhard Brauer 01 Jan '05

01 Jan '05

Gruesse! Ich besitze einen Stollmann TA+PP2 Adapter. Gibt es eine Moeglichkeit, diesen unter Linux mittels CAPI bzw. Capi-Anwendungen zu nutzen? Interessant waere v.a. capi4hylax. Als reiner TA ist dieser ja IMHO mit hylafax nicht zu nutzen. at+fclass=? bringt nur ein OK. Google brachte leider nichts. Hat vielleicht sonst jemand Infos wie ich hylafax (drum geht es mir v.a.) mit dem TA nutzen kann? Danke und Gruss Gerhard

1 0