[opensuse-factory] new kernel did not finish install
Zypper -dup finally showed following info. An reinstall via yast did not do anything but wait. In the meantime it seems the new kernel is installed but should/could I happily use it? --------------------------------- Installation of kernel-default-4.5.0-7.1.g7f10552.x86_64 failed: Error: Subprocess failed. Error: RPM failed: Creating initrd: /boot/ initrd-4.5.0-7.g7f10552-default dracut: Executing: /usr/bin/dracut --logfile /var/log/YaST2/mkinitrd.log -- force /boot/initrd-4.5.0-7.g7f10552-default 4.5.0-7.g7f10552-default dracut: *** Including module: bash *** dracut: *** Including module: systemd *** dracut: *** Including module: warpclock *** dracut: *** Including module: systemd-initrd *** dracut: *** Including module: i18n *** dracut: *** Including module: drm *** dracut: *** Including module: plymouth *** dracut: *** Including module: kernel-modules *** dracut: *** Including module: resume *** dracut: *** Including module: rootfs-block *** dracut: *** Including module: terminfo *** dracut: *** Including module: udev-rules *** dracut: Skipping udev rule: 40-redhat.rules dracut: Skipping udev rule: 50-firmware.rules dracut: Skipping udev rule: 50-udev.rules dracut: Skipping udev rule: 91-permissions.rules dracut: Skipping udev rule: 80-drivers-modprobe.rules dracut: *** Including module: dracut-systemd *** dracut: *** Including module: haveged *** dracut: *** Including module: usrmount *** dracut: *** Including module: base *** dracut: *** Including module: fs-lib *** dracut: *** Including module: shutdown *** dracut: *** Including module: suse *** dracut: *** Including modules done *** dracut: *** Installing kernel module dependencies and firmware *** dracut: *** Installing kernel module dependencies and firmware done *** dracut: *** Resolving executable dependencies *** dracut: *** Resolving executable dependencies done*** dracut: *** Hardlinking files *** dracut: *** Hardlinking files done *** dracut: *** Stripping files *** dracut: *** Stripping files done *** dracut: *** Generating early-microcode cpio image *** dracut: *** Constructing GenuineIntel.bin **** dracut: *** Store current command line parameters *** dracut: Stored kernel commandline: dracut: resume=UUID=b979b9a0-fc2a-442f-9403-ef826cd229db dracut: root=UUID=3e238e33-0b53-4c4d-802a-a5c7f351471c rootfstype=ext4 rootflags=rw,relatime,data=ordered dracut: *** Creating image file '/boot/initrd-4.5.0-7.g7f10552-default' *** dracut: *** Creating initramfs image file '/boot/initrd-4.5.0-7.g7f10552- default' done *** warning: %post(kernel-default-4.5.0-7.1.g7f10552.x86_64) scriptlet failed, signal 2 -- Linux User 183145 using Tumbleweed on a Pentium IV System : Linux 4.5.0-5.g8cf0ce6-default Distro : openSUSE 20160401 (x86_64) Desktop: KDE Frameworks: 5.20.0 and Plasma 5.5.5 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On středa 6. dubna 2016 13:56 C. Brouerius van Nidek wrote:
Zypper -dup finally showed following info. An reinstall via yast did not do anything but wait. In the meantime it seems the new kernel is installed but should/could I happily use it? ... dracut: *** Creating image file '/boot/initrd-4.5.0-7.g7f10552-default' *** dracut: *** Creating initramfs image file '/boot/initrd-4.5.0-7.g7f10552- default' done ***
This space before "default" is kind of disturbing. I suggest to check if the file name is correct. If it is, you might want to run depmod -a 4.5.0-7.g7f10552-default and check (and possibly regenerate) your bootloader configuration.
warning: %post(kernel-default-4.5.0-7.1.g7f10552.x86_64) scriptlet failed, signal 2
Signal 2 is SIGINT which usually means process terminated using Ctrl-C. Did you do that? Michal Kubeček -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On Wednesday, April 6, 2016 9:26:44 AM WIB Michal Kubecek wrote:
On středa 6. dubna 2016 13:56 C. Brouerius van Nidek wrote:
Zypper -dup finally showed following info. An reinstall via yast did not do anything but wait. In the meantime it seems the new kernel is installed but should/could I happily use it?
...
dracut: *** Creating image file '/boot/initrd-4.5.0-7.g7f10552-default' *** dracut: *** Creating initramfs image file '/boot/initrd-4.5.0-7.g7f10552- default' done ***
This space before "default" is kind of disturbing. I suggest to check if the file name is correct. If it is, you might want to run
depmod -a 4.5.0-7.g7f10552-default
and check (and possibly regenerate) your bootloader configuration.
warning: %post(kernel-default-4.5.0-7.1.g7f10552.x86_64) scriptlet failed, signal 2
Signal 2 is SIGINT which usually means process terminated using Ctrl-C. Did you do that?
Michal Kubeček
Yes, I was responsible for the signal 2, after a wait from close to half an hour. Know that kernel install can take some extra time but decided that 30 minute were excesive ;) -- Linux User 183145 using Tumbleweed on a Pentium IV System : Linux 4.5.0-5.g8cf0ce6-default Distro : openSUSE 20160405 (x86_64) Desktop: KDE Frameworks: 5.20.0 and Plasma 5.5.5 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Signal 2 is SIGINT which usually means process terminated using Ctrl-C. Did you do that?
Yes, I was responsible for the signal 2, after a wait from close to half an hour. Know that kernel install can take some extra time but decided that 30 minute were excesive ;)
Can't blame you. :-) But next time you might want to check what command is blocked and what is it waiting for before you kill it. This information could be useful for finding the problem (and solution). Michal Kubeček -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Op woensdag 6 april 2016 13:56:44 CEST schreef C. Brouerius van Nidek:
Zypper -dup finally showed following info. An reinstall via yast did not do anything but wait. In the meantime it seems the new kernel is installed but should/could I happily use it?
---------------------------------
Installation of kernel-default-4.5.0-7.1.g7f10552.x86_64 failed: Error: Subprocess failed. Error: RPM failed: Creating initrd: /boot/ initrd-4.5.0-7.g7f10552-default dracut: Executing: /usr/bin/dracut --logfile /var/log/YaST2/mkinitrd.log -- force /boot/initrd-4.5.0-7.g7f10552-default 4.5.0-7.g7f10552-default dracut: *** Including module: bash *** dracut: *** Including module: systemd *** dracut: *** Including module: warpclock *** dracut: *** Including module: systemd-initrd *** dracut: *** Including module: i18n *** dracut: *** Including module: drm *** dracut: *** Including module: plymouth *** dracut: *** Including module: kernel-modules *** dracut: *** Including module: resume *** dracut: *** Including module: rootfs-block *** dracut: *** Including module: terminfo *** dracut: *** Including module: udev-rules *** dracut: Skipping udev rule: 40-redhat.rules dracut: Skipping udev rule: 50-firmware.rules dracut: Skipping udev rule: 50-udev.rules dracut: Skipping udev rule: 91-permissions.rules dracut: Skipping udev rule: 80-drivers-modprobe.rules dracut: *** Including module: dracut-systemd *** dracut: *** Including module: haveged *** dracut: *** Including module: usrmount *** dracut: *** Including module: base *** dracut: *** Including module: fs-lib *** dracut: *** Including module: shutdown *** dracut: *** Including module: suse *** dracut: *** Including modules done *** dracut: *** Installing kernel module dependencies and firmware *** dracut: *** Installing kernel module dependencies and firmware done *** dracut: *** Resolving executable dependencies *** dracut: *** Resolving executable dependencies done*** dracut: *** Hardlinking files *** dracut: *** Hardlinking files done *** dracut: *** Stripping files *** dracut: *** Stripping files done *** dracut: *** Generating early-microcode cpio image *** dracut: *** Constructing GenuineIntel.bin **** dracut: *** Store current command line parameters *** dracut: Stored kernel commandline: dracut: resume=UUID=b979b9a0-fc2a-442f-9403-ef826cd229db dracut: root=UUID=3e238e33-0b53-4c4d-802a-a5c7f351471c rootfstype=ext4 rootflags=rw,relatime,data=ordered dracut: *** Creating image file '/boot/initrd-4.5.0-7.g7f10552-default' *** dracut: *** Creating initramfs image file '/boot/initrd-4.5.0-7.g7f10552- default' done *** warning: %post(kernel-default-4.5.0-7.1.g7f10552.x86_64) scriptlet failed, signal 2
The least I can say is that this is not TW's kernel -- Gertjan Lettink, a.k.a. Knurpht openSUSE Board Member openSUSE Forums Team -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
participants (3)
-
C. Brouerius van Nidek -
Knurpht - Gertjan Lettink -
Michal Kubecek