November 2023 - openSUSE Factory - openSUSE Mailing Lists

Audio broken after 20231127
by Oliver Schwabedissen 30 Nov '23

30 Nov '23

Hello, after updating from snapshot 20231126 to 20231127 audio is broken on my system. Snapshot 20231127 contains pipewire 1.0. I installed 20231127 yesterday before shutting down the system. When starting it today I noticed that the Spotofy app refuses to play any track. Then I found that the speaker in system tray was disabled. When checking my audio configuration it didn't find any audio device anymore. So I went back to 20231126, locked the following packages and rebooted. #zypper ll # | Name | Type | Repository | Comment --+----------------------+---------+------------+-------- 1 | kpipewire-imports | package | (any) | 2 | libpipewire | package | (any) | 3 | libwireplumber | package | (any) | 4 | libwireplumber-0_4-0 | package | (any) | 5 | pipewire* | package | (any) | 6 | wireplumber | package | (any) | Then I updated to 20231127 again, rebooted, and.. audio still works. hwinfo finds these audio devices: 19: PCI d00.3: 0403 Audio device [Created at pci.386] Unique ID: FRmF.ziY0svRSom2 Parent ID: JZZT.XtQqpuv2hW0 SysFS ID: /devices/pci0000:00/0000:00:08.1/0000:0d:00.3 SysFS BusID: 0000:0d:00.3 Hardware Class: sound Model: "AMD Family 17h (Models 00h-0fh) HD Audio Controller" Vendor: pci 0x1022 "AMD" Device: pci 0x1457 "Family 17h (Models 00h-0fh) HD Audio Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8723 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfce00000-0xfce07fff (rw,non-prefetchable) IRQ: 116 (2027 events) Module Alias: "pci:v00001022d00001457sv00001043sd00008723bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #31 (PCI bridge) 38: PCI b00.1: 0403 Audio device [Created at pci.386] Unique ID: 94OI.b0tOCU4_vDC Parent ID: cuhJ.CS5kfnTSviA SysFS ID: /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1 SysFS BusID: 0000:0b:00.1 Hardware Class: sound Model: "ATI Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT]" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0xab28 "Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT]" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0xab28 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfc920000-0xfc923fff (rw,non-prefetchable) IRQ: 115 (276 events) Module Alias: "pci:v00001002d0000AB28sv00001002sd0000AB28bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (PCI bridge) I'm using the audio device an the Asus mainboard (Intel HD Audio). Is there anything special to configure after updating from pipewire 0.3.85 to 1.0.0? Unfortunately I didn't run hwinfo with pipewire 1.0.0 installed. Regards, Oliver -- PGP Public Key available at https://pgp.mit.edu/ Key fingerprint = 3264 280C 05B1 572F 3F0B 42B8 1E7B 2D9D 063B D507

1 0

Fwd: FreeWear.org - Order sent
by Luna Jernberg 30 Nov '23

30 Nov '23

---------- Forwarded message --------- Från: Luna Jernberg <droidbittin(a)gmail.com> Date: tors 30 nov. 2023 kl 13:24 Subject: Re: FreeWear.org - Order sent To: <admin(a)freewear.org>, YaST-devel <yast-devel(a)opensuse.org>, opensuse-project <opensuse-project(a)opensuse.org>, Luna Jernberg < droidbittin(a)gmail.com> Cc: <bittin(a)opensuse.org> Got this package today: https://cdn.discordapp.com/attachments/1034064478762967080/1179754101257556… Den tis 21 nov. 2023 kl 13:29 skrev FreeWear.org store <admin(a)freewear.org>: > »freewear.org <https://www.freewear.org> > 21.11.2023, 1:04pm > Order 0x9733668B29 > <https://www.freewear.org/?page=order_status&order_ref=9733668b29> > Your payment has been confirmed, and your order is on the way. > > We have sent it through Postal service. The estimated delivery period is > '7 to 20 working days (depending of destination)'. > > Please keep in mind: If you're absent at the moment of delivery, the > Postal Service must notify you to pick up the shipment at the Postal > Office. This Postal Certified Letter is very unlikely that pay Custom > taxes, although it's not impossible to happen (never in EU). Air Postal > Services may be delayed in some countries. > > Shipping reference is '*RV248428902ES*'. You can track it here > <https://www.correos.es/es/en/tools/tracker/items/details?tracking-number=RV…> > . > In case of doubt please review out documentati on about failed deliveries > <https://www.freewear.org/about#Delivery_failures> and returns > <https://www.freewear.org/about#Returns>. > > Enjoy it :) > Client data > ------------------------------ > Name Luna Jernberg > Address Näsbylundsvägen 8 > City Täby > Province/State Stockholm > Country Sweden > Post/Zip code 183 38 > Phone 46728421930 > e-mail bittin(a)opensuse.org > Shipping method Postal service - Registered letter > Payment method Credit or debit card > > Order data > ------------------------------ > Article Quantity Price Total > FW0451 - openSUSE sticker 1 1.90 € 1.90 € > FW0450 - openSUSE Tumbleweed dark sticker 1 1.90 € 1.90 € > *Shipping costs* 7.55 € > Total (VAT included) 11.35 € > If you find any problem with the order, don't hesitate to contact us: > admin(a)freewear.org > ------------------------------ > FreeWear.org. C.B. is Responsible for the processing of personal data > provided under your consent and informs you that this data will be treated > in accordance with the provisions in the regulations in force on personal > data protection, Regulation (EU) 2016/679 of April 27, 2016 (GDPR) and the > Organic Law (ES) 15/1999 of December 13 (LOPD), in order to maintain a > commercial relationship and preserved while, until is a mutual interest to > maintain the end of the treatment and when it is no longer necessary for > such Finally, they will be eliminated with adequate security measures to > guarantee the total destruction of them. The data will not be communicated > to third parties, except legal obligation. Likewise, it is reported that > you can exercise the rights of access, rectification, portability and > deletion of your data and those of limitation and opposition to your > treatment by contacting FreeWear.org C.B, in Travesía do Monte 18, > Beade-Saá, 36312 VIGO (Pontevedra), Spain, or through the e-mail: > admin(a)freewear.org.

2 1

New Tumbleweed snapshot 20231128 released!
by Dominique Leuenberger 30 Nov '23

30 Nov '23

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: NetworkManager-applet avahi avahi-glib2 dracut (059+suse.522.g0fc72191 -> 059+suse.530.gba7b6a35) evince grub2 gstreamer-plugins-ugly gtk2-metatheme-sonar kernel-firmware (20231107 -> 20231127) libxslt (1.1.38 -> 1.1.39) pcsc-lite (2.0.0 -> 2.0.1) python-Pygments (2.16.1 -> 2.17.2) python-SQLAlchemy (2.0.21 -> 2.0.23) python-argcomplete (3.1.4 -> 3.1.6) python-certifi (2023.7.22 -> 2023.11.17) python-gevent (23.9.0 -> 23.9.1) python-greenlet (3.0.0 -> 3.0.1) python-httpx (0.25.0 -> 0.25.2) python-idna (3.4 -> 3.6) python-mysqlclient (2.1.1 -> 2.2.0) python-pyOpenSSL (23.2.0 -> 23.3.0) python-pyasn1 (0.5.0 -> 0.5.1) python-pycryptodome (3.18.0 -> 3.19.0) python-reportlab (4.0.5 -> 4.0.7) python-simplejson (3.19.1 -> 3.19.2) python-zipp (3.15.0 -> 3.17.0) rubygem-autoprefixer-rails (10.4.15.0 -> 10.4.16.0) rubygem-bcrypt (3.1.19 -> 3.1.20) rubygem-debase-ruby_core_source (3.2.2 -> 3.2.3) rubygem-hoe (4.0.5 -> 4.1.0) rubygem-mustermann-grape (1.0.2 -> 1.1.0) rubygem-nio4r (2.5.9 -> 2.6.1) rubygem-pkg-config (1.5.5 -> 1.5.6) rubygem-raindrops (0.20.0 -> 0.20.1) rubygem-spring (4.1.2 -> 4.1.3) rubygem-sshkit (1.21.5 -> 1.21.6) rubygem-unf_ext (0.0.8.2 -> 0.0.9.1) rubygem-xmlhash (1.3.8 -> 1.3.9) system-config-printer tigervnc xdg-desktop-portal (1.18.1 -> 1.18.2) xdg-desktop-portal-gnome (45.0 -> 45.1) zenity (3.99.2 -> 3.99.90) === Details === ==== NetworkManager-applet ==== Subpackages: NetworkManager-connection-editor NetworkManager-connection-editor-lang - Use %autosetup instead of %setup/%patch. ==== avahi ==== Subpackages: avahi-lang libavahi-client3 libavahi-client3-32bit libavahi-common3 libavahi-common3-32bit libavahi-core7 - Reformat avahi-gacdir.patch to apply as patch -p1. - Use %autopatch instead of deprecated %patchN format. ==== avahi-glib2 ==== Subpackages: libavahi-glib1 libavahi-gobject0 libavahi-ui-gtk3-0 - Reformat avahi-gacdir.patch to apply as patch -p1. - Use %autopatch instead of deprecated %patchN format. ==== dracut ==== Version update (059+suse.522.g0fc72191 -> 059+suse.530.gba7b6a35) - Update to version 059+suse.530.gba7b6a35: * fix(dracut.sh): skip README for AMD microcode generation (bsc#1217083) * fix(90kernel-modules): add intel_lpss_pci for MacBook Pro 2017 * feat(kernel-modules): install SPMI modules on ARM/RISC-V * feat(kernel-modules): add Qualcomm IPC router to enable USB * fix(pcsc): add --disable-polkit to pcscd.service * fix(pcsc): add opensc load module file ==== evince ==== Subpackages: evince-lang evince-plugin-comicsdocument evince-plugin-djvudocument evince-plugin-dvidocument evince-plugin-pdfdocument evince-plugin-tiffdocument evince-plugin-xpsdocument libevdocument3-4 libevview3-3 typelib-1_0-EvinceDocument-3_0 typelib-1_0-EvinceView-3_0 - Use %patch -P N instead of deprecated %patchN. ==== grub2 ==== Subpackages: grub2-i386-pc grub2-snapper-plugin grub2-systemd-sleep-plugin grub2-x86_64-efi grub2-x86_64-xen - Fix unattended boot with TPM2 allows downgrading kernel and rootfs, also enhancing the overall security posture (bsc#1216680) * 0001-Improve-TPM-key-protection-on-boot-interruptions.patch * 0002-Restrict-file-access-on-cryptodisk-print.patch * 0003-Restrict-ls-and-auto-file-completion-on-cryptodisk-p.patch * 0004-Key-revocation-on-out-of-bound-file-access.patch - grub2.spec: Fix openQA test failure in SLE-15-SP6 due to missing font in memdisk ==== gstreamer-plugins-ugly ==== Subpackages: gstreamer-plugins-ugly-lang - Move libgstasf plugin from BUILD_ORIG to main package, stop passing asfdemux=disabled to meson setup. ==== gtk2-metatheme-sonar ==== Subpackages: metatheme-sonar-common sonar-icon-theme - Use %patch -p N instead of deprecated %patchN. ==== kernel-firmware ==== Version update (20231107 -> 20231127) Subpackages: kernel-firmware-all kernel-firmware-amdgpu kernel-firmware-ath10k kernel-firmware-ath11k kernel-firmware-atheros kernel-firmware-bluetooth kernel-firmware-bnx2 kernel-firmware-brcm kernel-firmware-chelsio kernel-firmware-dpaa2 kernel-firmware-i915 kernel-firmware-intel kernel-firmware-iwlwifi kernel-firmware-liquidio kernel-firmware-marvell kernel-firmware-media kernel-firmware-mediatek kernel-firmware-mellanox kernel-firmware-mwifiex kernel-firmware-network kernel-firmware-nfp kernel-firmware-nvidia kernel-firmware-platform kernel-firmware-prestera kernel-firmware-qcom kernel-firmware-qlogic kernel-firmware-radeon kernel-firmware-realtek kernel-firmware-serial kernel-firmware-sound kernel-firmware-ti kernel-firmware-ueagle kernel-firmware-usb-network - Update to version 20231127 (git commit 4124f8f928d5): * Make rdfind optional * ice: update ice DDP wireless_edge package to 1.3.13.0 * linux-firmware: update firmware for mediatek bluetooth chip (MT7922) * linux-firmware: update firmware for mediatek bluetooth chip (MT7921) * linux-firmware: update firmware for MT7922 WiFi device * linux-firmware: update firmware for MT7921 WiFi device * Makefile, copy-firmware: Use portable "command -v" to detect installed programs * amdgpu: update DMCUB firmware to 0.0.194.0 for DCN321 and DCN32 * powervr: add firmware for Imagination Technologies AXE-1-16M GPU * ice: update ice DDP comms package to 1.3.45.0 * ice: update ice DDP package to 1.3.35.0 * mediatek: Remove an unused packed library * amdgpu: update DMCUB firmware to 0.0.193.0 for DCN31 and DCN314 - Drop obsoleted copy-file-skip-rdfind.patch; use --ignore-duplicates - Update to version 20231120 (git commit 9552083a783e): * mediatek: Sync shared memory structure changes * Intel Bluetooth: Update firmware file for Intel Bluetooth BE200 * i915: Update MTL DMC to v2.19 * Make email replies more resilient * Try both utf-8 and windows-1252 for decoding email - Update to version 20231116 (git commit 6723a8d90923): * iwlwifi: fix for the new FWs from core83-55 release * Enable deb and rpm builds on tags * linux-firmware: Add firmware for Cirrus CS35L41 on HP G11 Laptops * linux-firmware: Add firmware for Cirrus CS35L41 on 2024 ASUS Zenbook Laptops - Update to version 20231115 (git commit a07fd0b96b5a): * iwlwifi: add new FWs from core83-55 release * iwlwifi: update cc/Qu/QuZ firmwares for core83-55 release * Add a workaround for gitlab.freedesktop.org pull requests * Add extra debugging output when processing pull requests * Process pull requets directly from mbox * linux-firmware: add firmware for mt7988 internal 2.5G ethernet phy * Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX101 * Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX203 * Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX211 * Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX101 * Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX101 * Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX203 * Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX203 * Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX211 * Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX211 * Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX210 - Update to version 20231110 (git commit 74158e7ac86d): * amdgpu: DMCUB updates for various AMDGPU ASICs * Ensure rdfind is installed * Add checks for destination directory being specified * Fix symlink creation for some files * Fix classification of some pull requests * nvidia: add GSP-RM version 535.113.01 firmware images - Skip rdfind (not included in our distro as default): copy-file-skip-rdfind.patch - Fix make-files.sh to handle symlinked directories ==== libxslt ==== Version update (1.1.38 -> 1.1.39) Subpackages: libexslt0 libxslt-tools libxslt1 - Update to version 1.1.39: * Bug fixes: extensions: Don't search imports for extension prefixes * Improvements: - transform: Check maximum depth when processing default templates - build: . Add more missing include . Add missing includes - python: Don't set deprecated global - imports: Limit nesting depth - extensions: Report top-level elements in xsltDebugDumpExtensions - Add extern "C" { } block to xsltlocale.h * Portability: - python: Make it compatible with python3.12 - date: . Fix check for localtime_s . Fix check for gmtime_s * Build systems: - pkg-config files include cflags for static builds - Handle NOCONFIG case when setting locations from CMake target properties - autotools: Make xslt-config executable * Tests: - tests: Structured error handler now passes a const xmlError - python: Fix tests on MinGW - fuzz: Fix xmlFuzzEntityLoader after recent libxml2 changes ==== pcsc-lite ==== Version update (2.0.0 -> 2.0.1) Subpackages: libpcsclite1 - version 2.0.1 * SCardConnect(): return SCARD_W_SECURITY_VIOLATION when needed (polkit) * SCardCancel(): return SCARD_S_SUCCESS even if the client already finished * polkit is enabled by default * libpcscspy: fix a crash with NULL pointers * Doxygen: fix SCardBeginTransaction() documentation * fix pcscd internal thread safety issues (clang -fsanitize=thread) * Some other minor improvements ==== python-Pygments ==== Version update (2.16.1 -> 2.17.2) - update to 2.17.2: * Fix a packaging issue on macOS * Updated lexers: * TOML: Fix bug making lexing of single-quoted strings too eager * Cypher: fix comment matching, add missing keywords * Fortran: add ``elseif`` keyword * Lean: make it available as ``lean3``, in preparation for * a possible switch to ``lean`` highlighting as Lean 4 * JSON: add MIME types and file extensions for several line- delimited JSON formats * Nix: many improvements * OCaml: Add ``and`` keyword, remove ``value`` from keywords * Python: add ``starlark`` and ``bazel`` aliases * Snowball: Treat ``len`` like ``size`` * Spice: add ``panic`` keyword and ``->`` operator * squid.conf: fix catastrophic backtracking * TOML: rewritten, with many fixes * Turtle: support blank nodes * Wikitext: fix erroneous highlighting of LanguageConverter markup * CMake: support ``[=[ bracketed arguments ]=]``` * Fix ctags support and tests * Include ``Lexer.add_filter`` in the documentation * Add a ``Lean3Lexer`` alias * The ``pygments.styles`` module contains a new ``STYLES`` variable with a dictionary of built-in styles. The old ``STYLE_MAP`` variable, which uses a different format, is kept for backwards compatibility. * On Windows, add a new installation extra (``windows- terminal``) which pulls in dependencies for colored console output. See :doc:`cmdline` for more details. * Support more file types in ``autopygmentize`` script * Change color of numbers in ``rrt`` style * Fix error when trying to look up plugin formatters by file extension of the output format * Use Hatchling as a build backend instead of setuptools. * This change is transparent to most users. Distribution packagers who build without build isolation need to add hatchling as a build dependency and remove setuptools. People downloading source distributions and wheels from PyPI directly should note that they now have ``pygments`` in their file names instead of ``Pygments``. * Improve the test framework to also check for lost tokens when processing the snippets and example files * Improve the *Dracula* style definition to make it easier to maintain ==== python-SQLAlchemy ==== Version update (2.0.21 -> 2.0.23) - update to 2.0.23: * https://docs.sqlalchemy.org/en/20/changelog/changelog_20.html#change-2.0.23 * https://docs.sqlalchemy.org/en/20/changelog/changelog_20.html#change-2.0.22 ==== python-argcomplete ==== Version update (3.1.4 -> 3.1.6) - update to 3.1.6: * Respect user choice in activate-global-python-argcomplete * Escape colon in zsh completions. Fixes #456 * Call \_default as a fallback in zsh global completion ==== python-certifi ==== Version update (2023.7.22 -> 2023.11.17) - update to 2023.11.17: Added certs: * Subject: CN=TrustAsia Global Root CA G3 O=TrustAsia Technologies, Inc. * Subject: CN=TrustAsia Global Root CA G4 O=TrustAsia Technologies, Inc. * Subject: CN=CommScope Public Trust ECC Root-01 O=CommScope * Subject: CN=CommScope Public Trust ECC Root-02 O=CommScope * Subject: CN=CommScope Public Trust RSA Root-01 O=CommScope * Subject: CN=CommScope Public Trust RSA Root-02 O=CommScope Removed certs: * Subject: CN=Autoridad de Certificacion Firmaprofesional CIF A62634068 ==== python-gevent ==== Version update (23.9.0 -> 23.9.1) - update to 23.9.1: * Require greenlet 3.0 on Python 3.11 and Python 3.12; greenlet 3.0 is recommended for all platforms. ==== python-greenlet ==== Version update (3.0.0 -> 3.0.1) - update to 3.0.1: * Fix a potential crash on Python 3.8 at interpreter shutdown time. This was a regression from earlier 3.0.x releases. ==== python-httpx ==== Version update (0.25.0 -> 0.25.2) - update to 0.25.2: * Add missing type hints to few `__init__()` methods. (#2938) * Add support for Python 3.12. (#2854) * Add support for httpcore 1.0 (#2885) * Raise `ValueError` on `Response.encoding` being set after `Response.text` has been accessed. (#2852) - drop newer-httpcore.patch (upstream) ==== python-idna ==== Version update (3.4 -> 3.6) - update to 3.6: * Fix regression to include tests in source distribution. * Update to Unicode 15.1.0 * String codec name is now "idna2008" as overriding the system codec "idna" was not working. * Fix typing error for codec encoding * "setup.cfg" has been added for this release due to some downstream * lack of adherence to PEP 517. Should be removed in a future release so please prepare accordingly. * Removed reliance on a symlink for the "idna-data" tool to comport with PEP 517 and the Python Packaging User Guide for sdist archives. * Added security reporting protocol for project ==== python-mysqlclient ==== Version update (2.1.1 -> 2.2.0) - update to 2.2.0: * Use ``pkg-config`` instead of ``mysql_config`` (#586) * Raise ProgrammingError on -inf (#557) * Raise IntegrityError for ER_BAD_NULL. (#579) * Windows: Use MariaDB Connector/C 3.3.4 (#585) * Use pkg-config instead of mysql_config (#586) * Add collation option (#564) * Drop Python 3.7 support (#593) * Use pyproject.toml for build (#598) * Add Cursor.mogrify (#477) * Partial support of ssl_mode option with mariadbclient (#475) * Discard remaining results without creating Python objects * Fix executemany with binary prefix (#605) ==== python-pyOpenSSL ==== Version update (23.2.0 -> 23.3.0) - update to 23.3.0: * Dropped support for Python 3.6. * The minimum ``cryptography`` version is now 41.0.5. * Removed ``OpenSSL.crypto.loads_pkcs7`` and ``OpenSSL.crypto.loads_pkcs12`` which had been deprecated for 3 years. * Added ``OpenSSL.SSL.OP_LEGACY_SERVER_CONNECT`` to allow legacy insecure renegotiation between OpenSSL and unpatched servers. * Deprecated ``OpenSSL.crypto.PKCS12`` (which was intended to have been deprecated at the same time as ``OpenSSL.crypto.load_pkcs12``). * Deprecated ``OpenSSL.crypto.NetscapeSPKI``. * Deprecated ``OpenSSL.crypto.CRL`` * Deprecated ``OpenSSL.crypto.Revoked`` * Deprecated ``OpenSSL.crypto.load_crl`` and ``OpenSSL.crypto.dump_crl`` * Deprecated ``OpenSSL.crypto.sign`` and ``OpenSSL.crypto.verify`` * Deprecated ``OpenSSL.crypto.X509Extension`` * Changed ``OpenSSL.crypto.X509Store.add_crl`` to also accept * ``cryptography``'s ``x509.CertificateRevocationList`` arguments in addition * to the now deprecated ``OpenSSL.crypto.CRL`` arguments. * Fixed ``test_set_default_verify_paths`` test so that it is skipped if no network connection is available. ==== python-pyasn1 ==== Version update (0.5.0 -> 0.5.1) - update to 0.5.1: * Added support for PyPy 3.10 and Python 3.12 * Updated RTD configuration to include a dummy index.rst redirecting to contents.html, ensuring compatibility with third-party documentation and search indexes. * Fixed the API breakage wih decoder.decode(substrateFun=...). * A substrateFun passed to ``decoder.decode()`` can now be either v0.4 Non-Streaming or v0.5 Streaming. pyasn1 will detect and handle both cases transparently. * A substrateFun passed to one of the new streaming decoders is * still expected to be v0.5 Streaming only. ==== python-pycryptodome ==== Version update (3.18.0 -> 3.19.0) - update to 3.19.0: * The ``update()`` methods of TupleHash128 and TupleHash256 objects can now hash multiple items (byte strings) at once. * Added support for ECDH, with ``Crypto.Protocol.DH``. * GH#754: due to a bug in ``cffi``, do not use it on Windows with Python 3.12+. ==== python-reportlab ==== Version update (4.0.5 -> 4.0.7) - update to 4.0.7: * allow testutils.makeSuiteForClasses to specify a prefix for test method names * SpiderChart can have direct draw flowable labels * fix and improve tests for python -mreportlab.lib.rl_accel * fix barchart 3D stacked case & fix barchart valueAxis reverseDirection behaviour. * fix importlib usage in reportlab init, reported by Frank Epperlein and others * add value axes extraMinMaxValues as aid to parallel axes * add styles str2alignment maps left/right/center/centre/justify etc * fix validators.isSubclassOf * test ddfStyle as instance first in textlabels.py * allow Pie Doughnut classes to control label class - drop importlib.patch (upstream) ==== python-simplejson ==== Version update (3.19.1 -> 3.19.2) - update to 3.19.2: * Updated test & build matrix to include Python 3.12 ==== python-zipp ==== Version update (3.15.0 -> 3.17.0) - update to 3.17.0: * Added ``CompleteDirs.inject`` classmethod to make available for use elsewhere. * Avoid matching path separators for '?' in glob. * In ``Path.match``, Windows path separators are no longer honored. The fact that they were was incidental and never supported. (#92) * Fixed name/suffix/suffixes/stem operations when no filename is present and the Path is not at the root of the zipfile. (#96) * Reworked glob utilizing the namelist directly. (#101) * Replaced the ``fnmatch.translate`` with a fresh glob-to-regex translator for more correct matching behavior. (#98) * Require Python 3.8 or later. ==== rubygem-autoprefixer-rails ==== Version update (10.4.15.0 -> 10.4.16.0) - ## 10.4.16.0 * Improved performance (by Romain Menke). ==== rubygem-bcrypt ==== Version update (3.1.19 -> 3.1.20) - 3.1.20 Nov 17 2023 - Limit packaged files -- decrease gem filesize by ~28% [GH #272 by @pusewicz] ==== rubygem-debase-ruby_core_source ==== Version update (3.2.2 -> 3.2.3) - ## [3.2.3](https://github.com/ruby-debug/debase-ruby_core_source/compare/3.2.3.… * ruby-3.3.0-preview3 sources added * ruby-3.3.0-preview2 sources removed ==== rubygem-hoe ==== Version update (4.0.5 -> 4.1.0) - New upstream release 4.1.0, see bundled History.rdoc ==== rubygem-mustermann-grape ==== Version update (1.0.2 -> 1.1.0) - New upstream release 1.1.0, see bundled CHANGELOG.md ==== rubygem-nio4r ==== Version update (2.5.9 -> 2.6.1) - New upstream release 2.6.1, see bundled changes.md ==== rubygem-pkg-config ==== Version update (1.5.5 -> 1.5.6) - New upstream release 1.5.6, see bundled NEWS ==== rubygem-raindrops ==== Version update (0.20.0 -> 0.20.1) - New upstream release 0.20.1, see bundled NEWS ==== rubygem-spring ==== Version update (4.1.2 -> 4.1.3) - New upstream release 4.1.3, no changelog found ==== rubygem-sshkit ==== Version update (1.21.5 -> 1.21.6) - New upstream release 1.21.6, see bundled CHANGELOG.md ==== rubygem-unf_ext ==== Version update (0.0.8.2 -> 0.0.9.1) - # Changelog [#]# [0.0.9.1](https://github.com/knu/ruby-unf_ext/tree/v0.0.9.1) (2023-11-16) [Full Changelog](https://github.com/knu/ruby-unf_ext/compare/v0.0.9...v0.0.9.1) - Fix use of designated initializers. [\#75](https://github.com/knu/ruby-unf_ext/pull/75) ([igorpeshansky](https://github.com/igorpeshansky)) [#]# [0.0.9](https://github.com/knu/ruby-unf_ext/tree/v0.0.9) (2023-11-11) [Full Changelog](https://github.com/knu/ruby-unf_ext/compare/v0.0.8.2...v0.0.9) - Use the newer TypedData extension API [\#72](https://github.com/knu/ruby-unf_ext/pull/72) ([casperisfine](https://github.com/casperisfine)) - Update Actions - updates OS's, add Ruby 3,2, etc [\#71](https://github.com/knu/ruby-unf_ext/pull/71) ([MSP-Greg](https://github.com/MSP-Greg)) - Add cross compilation for Ruby 3.2 [\#69](https://github.com/knu/ruby-unf_ext/pull/69) ([johnnyshields](https://github.com/johnnyshields)) ==== rubygem-xmlhash ==== Version update (1.3.8 -> 1.3.9) - New upstream release 1.3.9, see bundled History.txt ==== system-config-printer ==== Subpackages: python3-cupshelpers system-config-printer-applet system-config-printer-common system-config-printer-common-lang system-config-printer-dbus-service udev-configure-printer - Use %autosetup -p1 instead of multiple %patch lines. Allows us to get rid of deprecated %patchN. ==== tigervnc ==== Subpackages: libXvnc1 xorg-x11-Xvnc xorg-x11-Xvnc-module - introduced n_dont_sign_java_client.patch and changed n_tigervnc-date-time.patch to allow the build to be reproducible (bsc#1208478): * Dont sign the Java client so the jar file won't contain a signed file with a variable timestamp. * The signing was necessary for accessing the system clipboard when the Java client runs as an applet. (This shouldn't harm due to the deprecation of Java applets was done in version 9). ==== xdg-desktop-portal ==== Version update (1.18.1 -> 1.18.2) Subpackages: xdg-desktop-portal-lang - Update to version 1.18.2: + Pass the token to the OpenURI portal and, when missing, an empty string. + Fix various memory and file descriptor leaks in the Document portal. + Make files and folders openend with the Document portal close properly. This should fix cases where the Document portal prevented external devices from unmounting, due to files inside them not getting closed after applications stop using them. + Implement FUSE getlk and setlk callbacks.This should enable using sqlite3 through the Document portal. + Properly resolve fd symlinks before opening them with O_NOFOLLOW. + Fix cases where the portal id is assumed to match the .desktop file name. + Allow sending directories in the file transfer portal. This should make it possible to, among other things, drag and drop folders and files simultaneously from and to sandboxed applications. + Fallback to a hardcoded check to xdg-desktop-portal-gtk in the absence of any other portal or configuration file, as a last resort mechanism. + Various smaller fixes to the build system. ==== xdg-desktop-portal-gnome ==== Version update (45.0 -> 45.1) Subpackages: xdg-desktop-portal-gnome-lang - Update to version 45.1: + accountdialog: Fix crash when pressing Escape + Send remote file URIs as local FUSE URIs + Various fixes to screencast and input capture + Expose org.gnome.desktop.calendar through the Settings portal + Put dialogs in separate window groups + Updated translations. ==== zenity ==== Version update (3.99.2 -> 3.99.90) Subpackages: zenity-lang - Update to version 3.99.90: + build: Make building manpage dependent upon manpage option + text: Handle long inputs properly + colview: Use g_signal_connect_object + tree/colview: Return correct value when filtered using search; code cleanups + colview: Add missing declaration to header + build: - Make implicit declarations an error - Make zenity4 compile against gtk 4.12 without deprecation warnings + tree: - Fix reading input from a named pipe - --checklist or --radiolist with < 2 cols should be an error - Fix output for non-check/radio multiple selections + util: Replace gtk_window_destroy() with gtk_application_remove_window(). + Updated translations.

1 0

Re: Your order with openSUSE Shop: 26719079-28301673
by Luna Jernberg 30 Nov '23

30 Nov '23

Got these some weeks ago: https://cdn.discordapp.com/attachments/1034064478762967080/1179076639573946… Den sön 19 nov. 2023 kl 16:39 skrev Spreadshirt Partnershop < service(a)spreadshirt.net>: > Thanks for your order, Luna > openSUSE Shop <https://openshop.myspreadshop.de/> > > > > *Thanks for your order* > *Hello Luna,* > Thanks for giving great products a new home. Here are your order details: > Estimated delivery date: > 28.11.2023 to 01.12.2023 > Order ID: > 26719079-28301673 > Delivery method: > Standard > Delivery address: > Luna Jernberg > Näsbylundsvägen 8 > 183 38 Täby > SWEDEN > Please review your order *now.* If you need to change something, please > cancel your current order and place a new one. > *Larger orders may be split and shipped separately.* > *Review Your Order* > <https://my.spreadshirt.de/orders/26719079?authToken=0f13feeaa8786fa7fed8900…> > We will attach the invoice to your shipping confirmation email. > Items Quantity Price per item Total > 569188716 1 x 8,99 € *8,99 €* > Buttons small 1''/25 mm (5-pack) > *Colour:* white > *Size:* One Size > *Print method:* Button printing > 569188705 1 x 8,99 € *8,99 €* > Buttons small 1''/25 mm (5-pack) > *Colour:* white > *Size:* One Size > *Print method:* Button printing > *Subtotal* *17,98 €* > Voucher - 3,60 € > *Postage/packing* *3,99 €* > *Total* *18,37 €* > [image: img] > You save *3,60 €* on this order > Payment method: > credit card > Billing address: > Luna Jernberg > Näsbylundsvägen 8 > 183 38 Täby > SWEDEN > *Review Your Order* > <https://my.spreadshirt.de/orders/26719079?authToken=0f13feeaa8786fa7fed8900…> > The total amount of 18,37 € will be debited from your credit card. You > will see the reference "sprd.net" on your credit card invoice. > *Not 100% happy?* > Spreadshirt’s customer service team will be glad to help: > *E-mail:* service(a)spreadshirt.co.uk > *Call:* +44 20 3966 1818 (Mo - Fr 8am - 5pm), regular landline fees > Please include your Order ID 26719079-28301673 and briefly describe how we > can help you. > Look forward to receiving your items and have fun! > *Your openSUSE Shop Team* > Printing, delivery and service by Spreadshirt > sprd.net AG | Gießerstraße 27 | 04229 Leipzig, Germany| Board authorised > to represent: Dr. Julian de Grahl (Chairman), Ferdinand von Humboldt | > Chairman of the supervisory board: Lukasz Gadowski | info(a)spreadshirt.net > | Commercial registry: Amtsgericht Leipzig, HRB 22478 | VAT ID No.: DE 8138 > 7149 4 > Privacy Policy <https://www.spreadshirt.co.uk/-C3928?affiliateId=1256549> > *General Terms and Conditions of Sales and Delivery of sprd.net > <http://sprd.net> AG for Customers* > *§ 1 General Information* > Your contractual partner for all orders within the scope of this online > offer is sprd.net AG, of Gießerstraße 27, 04229 Leipzig, Germany (listed > in the Commercial Register at the Local Court of Leipzig under number HRB > 22478), hereafter referred to as "Spreadshirt" > <https://www.spreadshirt.co.uk/?affiliateId=1256549>. > All deliveries from Spreadshirt to the customer are carried out based on > the general terms and conditions given below. These underlie all offers and > agreements between Spreadshirt and the customer and are accepted for the > duration of the whole business relationship. Opposing or deviating > conditions of the buyer are only binding if Spreadshirt has agreed to them > in writing. > *§ 2 Responsibility for Online Offer* > (1) Two shop types are available on Spreadshirt´s platform. First, there > are shops which are designed and operated by Spreadshirt itself > (“Spreadshirt shops“), and second, there are shops which are designed and > operated by independent shop owners (“partner shops”). Information on the > respective owner of a shop can be viewed via the link “legal information“ > in the respective shop. > (2) Spreadshirt is responsible for the articles and motifs offered in a > “Spreadshirt shop” as well as the overall design of the shop. > (3) The Shop owner assumes sole responsibility for marketing, > configuration and arrangement of the Shop as well as the articles and > designs on offer. Spreadshirt does not appropriate the Shop owners’ content > and ideas as long as these do not meet the regulations of this GT&C or the > regulations of the Partner GT&C > <https://www.spreadshirt.co.uk/-C10183?affiliateId=1256549>. In > particular, this applies to breaches on the part of Shop Operators of the > obligation to apply Spreadshirt’s General Terms and Conditions in their > shops vis-à-vis the end Customer. > *§ 3 Conclusion of the Contract* > (1) The “offers” contained on the website represent a non-binding > invitation for the customer to place an order with Spreadshirt. > (2) By filling in and sending off the order form on the Internet, the > Customer makes a binding offer for the conclusion of a contract of purchase > and/or a contract for work and materials. Before finally sending off the > order form, the customer has the opportunity to check that his/her details > are right and if necessary to correct them on a summary page. The following > languages are currently available for the ordering process: German, > English, French, Spanish, Dutch, Italian, Norwegian, Swedish, Danish, > Polish, Finnish. > Then Spreadshirt sends an order confirmation via e-mail to the customer > and examines the offer regarding its legal and effective feasibility, in > particular any possible infringement upon trademark rights of third > parties. The order confirmation does not represent an acceptance of the > offer but shall only acknowledge to the customer that their order was > received by Spreadshirt. > The contract only materialises when Spreadshirt dispatches the product > ordered to the Customer and confirms the dispatch to the customer with a > second e-mail (“Shipping Confirmation”). The details of the order can also > be viewed online in the user profile under “Orders” on www.spreadshirt.net > <https://www.spreadshirt.net?affiliateId=1256549>. > (3) In connection with §2 (3) Spreadshirt as platform provider cannot > pre-examine all print designs created by customers or shop owners for > possible breaches. Spreadshirt reserves the right to reject received orders > within the legal period of acceptance if, during the ordering process, it > becomes known or it is suspected that third-party rights or statutory > regulations will be violated by a print design. > (4) The conclusion of the contract shall depend on punctual and correct > supply of the goods to Spreadshirt. This proviso shall not apply in the > event of short-term disruption to deliveries or if Spreadshirt can be held > responsible for non-delivery, in particular if Spreadshirt fails to make a > congruent hedging transaction in good time. The Customer will be informed > immediately that the service is not available. If Customer has already paid > for the goods, this money will be reimbursed. > *§ 4 Delivery / Shipment* > (1) In principle, delivery is made within three weeks from the date when > the Customer receives confirmation of his/her order. Delivery dates and > times are only binding if they are expressly confirmed as such by > Spreadshirt in writing. > (2) Delivery is available to Germany and many other countries: More > information can be found at www.help.spreadshirt.com/hc/en-gb > <https://help.spreadshirt.com/hc/en-gb/articles/207165489>. > (3) Delivery shall be conducted by a shipment service provider chosen by > Spreadshirt. The customer has to pay standard shipping costs which may > depend on order value, and where it is shipped to. > (4) If in exceptional circumstances delivery is not possible within the > period of three weeks after conclusion of the contract mentioned in (1), > Spreadshirt shall promptly inform the customer about it in writing, at the > latest with the expiration of this time limit (§ 126b of the German Civil > Code). The customer is then entitled to a right of withdrawal, which they, > in turn, shall exercise immediately in writing (§ 126b of the German Civil > Code). > *§ 5 Prices* > (1) For customers from EU countries, Switzerland, the United Kingdom, > Norway, Liechtenstein, Monaco and the Isle of Man, the indicated prices are > final. They include the statutory taxes incurred, in particular value added > tax (VAT). The delivery address is decisive. > (2) For buyers outside the EU (except for buyers from Switzerland, the > United Kingdom, Norway, Liechtenstein, Monaco and the Isle of Man) and for > buyers from territories in EU states with special VAT treatment (see > Article 6 Directive 2006/112/EC > <https://eur-lex.europa.eu/legal-content/ALL/?uri=CELEX:32006L0112>), all > prices quoted are net prices. The delivery address is decisive. If VAT is > due in accordance with the statutory provisions in the recipient country, > the customer must also pay this upon receipt of the goods. In addition, > import duties, customs clearance costs as well as other costs and levies > may be incurred, which the customer must pay additionally upon receipt of > the goods. > (3) Shipping costs are to be borne by the customer, which may depend on > the order value and the place to which delivery is to be made. > *§ 6 Payment* > (1) The customer chooses the method of payment, which may be direct debit > (SEPA direct debit mandate), credit card, advance payment, PayPal or direct > transfer. Spreadshirt reserves the right of restricting the number of > payment methods that a customer can choose from on the basis of factual > criteria, as for example the order value. In case of direct debit payment > (SEPA direct debit mandate), Spreadshirt will submit a pre-notification > along with the order confirmation to the customer once the order has been > completed (refer to § 3 par. 2). Settlement of accounts are effected by > means of direct debit entries with the bank in charge of the customer’s > account in Germany, Austria and Spain 1 day on submitting a > pre-notification at the earliest, and in other countries 5 days on > submitting a pre-notification at the earliest. > (2) In case of the method of payment chosen by the customer not being > practicable, where Spreadshirt has met its contractual obligations, in > particular if it is the case that a direct debit from the customer´s > account is not possible due to a lack of funds or provision of wrong > information, then the customer shall reimburse any additional costs > incurred by Spreadshirt or a third party which carried out the transaction. > (3) Spreadshirt is entitled to make use of the services of trustworthy > third parties for the handling of the payment: > a) If it comes to a default of payment of the customer, Spreadshirt is > allowed to assign its claims to a debt collection agency and transfer the > personal data required for the handling of payments to these third parties. > b) In the case of intervention of third parties in the handling of > payments, then payment in relation to Spreadshirt only counts as made if > the amount has been provided contractually to the third party, so that the > third party can dispose of it as it sees fit. > (4) The customer agrees to electronic invoicing only. Invoices will be > made available in PDF format and sent to the customer via email. > *§ 7 Conditional Sale* > (1) Up to the payment of any monies owed to Spreadshirt the goods remain > the property of Spreadshirt. If the customer is a merchant according to the > German Commercial Code (HGB), Spreadshirt remains owner of all delivery > items up to the receipt of all payment due resulting from the business > relationship. > (2) The customer is obliged to handle the product with care up to the > transfer of ownership. > *§ 8 Guarantee* > (1) As far as there is a defect in the goods which falls under warranty, > the customer shall be entitled in the context of statutory regulations to > demand supplementary performance, withdraw from the contract or a reduction > in purchase price. > (2) In the case of return shipments due to defects Spreadshirt will also > pay for the cost of postage. > (3) Data communication via the internet, considering the current state of > the technology, cannot be guaranteed as being flawless und/or available at > any time. Thus, Spreadshirt shall not be liable for the continuous and > uninterrupted availability of the online offer. > (4) The claims of the customer from warranty need as a prerequisite that > they, as far as the customer is a merchant, have met their due obligations > of examination and censure according to § 377 of the German Commercial Code > (HGB). > (5) The term of limitation for claims under warranty for the goods > provided is two years starting from the receipt of such goods. If the > customer is in business then the term of limitation is one year. > *§ 9 Limitation of Liability* > (1) Apart from that, liability on the part of Spreadshirt follows > statutory provisions, insofar as nothing else is determined in these > general terms and conditions. Spreadshirt only bears unlimited > responsibility for damages, no matter what the legal ground, in the case of > deliberate action and gross negligence. In addition, Spreadshirt also bears > unlimited responsibility for damages in cases of mild negligence resulting > in loss of life, bodily harm or damage to health. In the case of mild > negligence and breach of an essential contractual obligation (cardinal > obligation) Spreadshirt´s liability is limited to the payment of the > foreseeable, typically occurring damage. Liability of Spreadshirt according > to the German Product Liability Act remains unaffected by the > abovementioned provisions. > (2) As far as liability of Spreadshirt is excluded or limited in these > general terms and conditions then the same applies for personal liability > for damages on the part of employees, representatives and agents of > Spreadshirt. > *§ 10 Information about the right of withdrawal for consumer* > Right of withdrawal > You have the right to withdraw from this contract within 14 days without > giving any reason. The withdrawal period will expire after 14 days from the > day on which you acquire, or a third party other than the carrier and > indicated by you acquires, physical possession of the last good. > To exercise the right of withdrawal, you must inform us (sprd.net AG, > Gießerstr. 27, 04229 Leipzig, Deutschland, Telefon +49 (0) 341 25 049 946, > Fax +49 (0) 341 59 400 5499, info(a)spreadshirt.net) of your decision to > withdraw from this contract by an unequivocal statement (e.g. a letter sent > by post, fax or e-mail). You may use the attached model withdrawal form, > but it is not obligatory. To meet the withdrawal deadline, it is sufficient > for you to send your communication concerning your exercise of the right of > withdrawal before the withdrawal period has expired. > Effects of withdrawal > If you withdraw from this contract, we shall reimburse to you all payments > received from you, including the costs of delivery (with the exception of > the supplementary costs resulting from your choice of a type of delivery > other than the least expensive type of standard delivery offered by us), > without undue delay and in any event not later than 14 days from the day on > which we are informed about your decision to withdraw from this contract. > We will carry out such reimbursement using the same means of payment as you > used for the initial transaction, unless you have expressly agreed > otherwise; in any event, you will not incur any fees as a result of such > reimbursement. > We may withhold reimbursement until we have received the goods back or you > have supplied evidence of having sent back the goods, whichever is the > earliest. You shall send back the goods or hand them over to us, without > undue delay and in any event not later than 14 days from the day on which > you communicate your withdrawal from this contract to us. The deadline is > met if you send back the goods before the period of 14 days has expired. > You will have to bear the direct cost of returning the goods. The cost is > estimated at a maximum of approximately 4 GBP. You are only liable for any > diminished value of the goods resulting from the handling other than what > is necessary to establish the nature, characteristics and functioning of > the goods. > Model withdrawal form > (complete and return this form only if you wish to withdraw from the > contract) > • To sprd.net AG, Gießerstr. 27, 04229 Leipzig, Deutschland, Fax +49 (0) > 341 59 400 5499, info(a)spreadshirt.net: > • I/We (*) hereby give notice that I/We (*) withdraw from my/our (*) > contract of sale of the following goods (*)/for the provision of the > following service (*), > • Ordered on (*)/received on (*), > • Name of consumer(s), > • Address of consumer(s), > • Signature of consumer(s) (only if this form is notified on paper), > • Date > (*) Delete as appropriate. > Exceptions to the right to cancel > Revocation of this contract is not possible with regard to the delivery of > goods that have not been pre-fabricated, and which have been either > selected individually or that have been explicitly personalised by the > customer to meet his personal preferences. > *§ 11 Copyrights to Print Designs, Release from Liability* > (1) If the Customer provides his/her own motif or otherwise influences the > product (personalisation of text), the Customer assures Spreadshirt that > the text and motif are not subject to any rights held by third parties. In > such case the cost of any breaches of copyright, personal rights or rights > to the use of a name will be borne solely by the Customer. The Customer > also assures Spreadshirt that by personalising the product he is also not > breaching any other rights held by third parties. > (2) The customer releases Spreadshirt from all demands and claims which > are made due to the infringement of such third-party rights, as far as the > customer is responsible for the breach of duty. The customer shall > reimburse Spreadshirt for all defense costs and other damages resulting > from any such action. > *§ 12 Technical and Design Deviations* > When fulfilling the contract, we expressly reserve the right to deviate > from the descriptions and information in our brochures, catalogues and > other written and electronical documents with respect to material, color, > weight, measurements, design or other features, as far as these can be > considered reasonable for the customer. Reasonable cause for change may > result from fluctuations customary in trade and technical production > processes. > *§ 13 Data Protection* > Spreadshirt uses personal data of the customer for appropriate purposes > and according to statutory regulations. The personal data given (i.e. name, > e-mail address, mailing address, bank details) for ordering products are > used by Spreadshirt for fulfillment and handling of the contract. This data > is treated confidentially by Spreadshirt and is not given to any third > parties who are not part of the ordering, delivery and payment procedures. > The customer shall be entitled to access information on the personal data > which Spreadshirt has saved about them free of charge. Moreover, they are > entitled to the correction of incorrect data, and the blocking and deletion > of their personal data, insofar as there is no legal obligation to retain > such data. > *§ 14 Dispute resolution* > The European Commission provides a platform for Online Dispute Resolution > (OS) which can be accessed here > <https://ec.europa.eu/consumers/odr/main/index.cfm?event=main.home.chooseLan…>. > We are neither required nor prepared to participate in a dispute settlement > procedure before a consumer arbitration panel. > *§ 15 Place of Jurisdiction – Place of Fulfillment – Choice of Law* > (1) Place of fulfillment for all services is the place of business of > Spreadshirt in Leipzig. > (2) As far as the customer is a merchant according to the Commercial Code > of Germany (HGB), a legal entity under public law or special fund under > public law, then Leipzig is the place of general jurisdiction. In such > case, Spreadshirt is also entitled to sue the customer according to the > opinion of Spreadshirt at their resident court. The same applies if the > customer does not have their place of general jurisdiction in Germany, > relocates their place of residence or habitual residence abroad after > conclusion of the agreement, or their place of residence or habitual > residence is unknown at the time of filing of an action. > (3) According to these general terms and conditions the agreement is > exclusively subject to the law of the Federal Republic of Germany. Recourse > to the UN Convention on Contracts for the International Sale of Goods is > excluded. As far as the client is a consumer according to § 13 of the > German Civil Code and is generally not resident in Germany, the mandatory > regulations of this country remain unaffected. > (4) If individual provisions of these general terms and conditions are > ineffective or oppose the statutory regulations, the rest of the agreement > remains unaffected. >

1 0

Snapshot 20231127 breaks audio (for me)
by Oliver Schwabedissen 30 Nov '23

30 Nov '23

Hello, after updating from snapshot 20231126 to 20231127 audio is broken on my system. Snapshot 20231127 contains pipewire 1.0. I installed 20231127 yesterday before shutting down the system. When starting it today I noticed that the Spotofy app refuses to play any track. Then I found that the speaker in system tray was disabled. When checking my audio configuration it didn't find any audio device anymore. So I went back to 20231126, locked the following packages and rebooted. #zypper ll # | Name | Type | Repository | Comment --+----------------------+---------+------------+-------- 1 | kpipewire-imports | package | (any) | 2 | libpipewire | package | (any) | 3 | libwireplumber | package | (any) | 4 | libwireplumber-0_4-0 | package | (any) | 5 | pipewire* | package | (any) | 6 | wireplumber | package | (any) | Then I updated to 20231127 again, rebooted, and.. audio still works. hwinfo finds these audio devices: 19: PCI d00.3: 0403 Audio device [Created at pci.386] Unique ID: FRmF.ziY0svRSom2 Parent ID: JZZT.XtQqpuv2hW0 SysFS ID: /devices/pci0000:00/0000:00:08.1/0000:0d:00.3 SysFS BusID: 0000:0d:00.3 Hardware Class: sound Model: "AMD Family 17h (Models 00h-0fh) HD Audio Controller" Vendor: pci 0x1022 "AMD" Device: pci 0x1457 "Family 17h (Models 00h-0fh) HD Audio Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8723 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfce00000-0xfce07fff (rw,non-prefetchable) IRQ: 116 (2027 events) Module Alias: "pci:v00001022d00001457sv00001043sd00008723bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #31 (PCI bridge) 38: PCI b00.1: 0403 Audio device [Created at pci.386] Unique ID: 94OI.b0tOCU4_vDC Parent ID: cuhJ.CS5kfnTSviA SysFS ID: /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1 SysFS BusID: 0000:0b:00.1 Hardware Class: sound Model: "ATI Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT]" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0xab28 "Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT]" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0xab28 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfc920000-0xfc923fff (rw,non-prefetchable) IRQ: 115 (276 events) Module Alias: "pci:v00001002d0000AB28sv00001002sd0000AB28bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (PCI bridge) I'm using the audio device an the Asus mainboard (Intel HD Audio). Is there anything special to configure after updating from pipewire 0.3.85 to 1.0.0? Unfortunately I didn't run hwinfo with pipewire 1.0.0 installed. Regards, Oliver -- PGP Public Key available at https://pgp.mit.edu/ Key fingerprint = 3264 280C 05B1 572F 3F0B 42B8 1E7B 2D9D 063B D507

1 0

segfault in postfix/smtp when relaying to smtp.gmail.com:587
by Tony Walker 29 Nov '23

29 Nov '23

For some reason, I can't subscribe to the support list. As a result, I can only ask here... I have several Debian, Ubuntu, and Fedora systems which relay local email to smtp.gmail.com:587 via Postfix. However, I can't get the same configuration working on Tumbleweed. The relevant configuration in main.cf is, relayhost = [smtp.gmail.com]:587 smtp_sasl_auth_enable = yes smtp_sasl_security_options = smtp_sasl_password_maps = lmdb:/etc/postfix/sasl_passwd smtp_use_tls = yes smtp_enforce_tls = yes smtp_tls_security_level = encrypt smtp_tls_CAfile = /var/lib/ca-certificates/ca-bundle.pem smtp_tls_CApath = /var/lib/ca-certificates/pem Thinking this could be due to a security configuration (e.g., deprication of MD5), I changed the following in main.cf smtp_tls_fingerprint_digest = sha256 smtpd_tls_fingerprint_digest = sha256 TLS is enabled in master.cf, tlsmgr unix - - n 1000? 1 tlsmgr I did NOT change any postfix sysconfig variables using Yast. With the following flags set in main.cf, debug_peer_level=3 debug_peer_list=smtp.gmail.com smtp_tls_loglevel = 2 I can see that name resolution, negotiation, password look-up, etc. work as expected. Then, I see a segfault in postfix/smtp. The journal entries are: Nov 26 19:41:51 ***REDACTED*** postfix/smtp[29834]: starting new SASL client Nov 26 19:41:51 ***REDACTED*** postfix/smtp[29834]: smtp_sasl_authenticate: smtp.gmail.com[142.251.177.109]:587: SASL mechanisms LOGIN PLAIN XOAUTH2 PLAIN-CLIENTTOKEN OAUTHBEARER XOAUTH Nov 26 19:41:51 ***REDACTED*** postfix/smtp[29834]: xsasl_cyrus_client_get_user: ***REDACTED*** Nov 26 19:41:51 ***REDACTED*** kernel: smtp[29834]: segfault at 4044 ip 0000559f5bc9dcae sp 00007ffc327dcc70 error 4 in smtp[559f5bc90000+f000] likely on CPU 15 (core 15, socket 0) Nov 26 19:41:51 ***REDACTED*** kernel: Code: ***REDACTED*** Nov 26 19:41:51 ***REDACTED*** systemd[1]: Started Process Core Dump (PID 29854/UID 0). Nov 26 19:41:51 ***REDACTED*** systemd[1]: Started Pass systemd-coredump journal entries to relevant user for potential DrKonqi handling. Nov 26 19:41:51 ***REDACTED*** systemd-coredump[29855]: [🡕] Process 29834 (smtp) of user 51 dumped core. Stack trace of thread 29834: #0 0x0000559f5bc9dcae n/a (smtp + 0x17cae) #1 0x00007f4253129ead _plug_get_simple (libkdexoauth2.so + 0x1ead) #2 0x00007f4253129303 n/a (libkdexoauth2.so + 0x1303) #3 0x00007f425310c49f sasl_client_step (libsasl2.so.3 + 0xd49f) #4 0x00007f425310df26 sasl_client_start (libsasl2.so.3 + 0xef26) #5 0x0000559f5bc9dffc n/a (smtp + 0x17ffc) #6 0x0000559f5bc987db n/a (smtp + 0x127db) #7 0x0000559f5bc98cfa n/a (smtp + 0x12cfa) #8 0x0000559f5bc97f4c n/a (smtp + 0x11f4c) #9 0x0000559f5bc9cd5f n/a (smtp + 0x16d5f) #10 0x0000559f5bc9da30 n/a (smtp + 0x17a30) #11 0x00007f42531fc548 n/a (libpostfix-master.so + 0x6548) #12 0x00007f42531fc6a8 n/a (libpostfix-master.so + 0x66a8) #13 0x00007f425314c496 event_loop (libpostfix-util.so + 0x16496) #14 0x00007f42531fa701 single_server_main (libpostfix-master.so + 0x4701) #15 0x0000559f5bc9db94 n/a (smtp + 0x17b94) #16 0x00007f42528281b0 __libc_start_call_main (libc.so.6 + 0x281b0) #17 0x00007f4252828279 __libc_start_main@@GLIBC_2.34 (libc.so.6 + 0x28279) #18 0x0000559f5bc90f35 n/a (smtp + 0xaf35) ELF object binary architecture: AMD x86-64 Nov 26 19:41:51 ***REDACTED*** postfix/qmgr[29821]: warning: private/smtp socket: malformed response Nov 26 19:41:51 ***REDACTED*** postfix/qmgr[29821]: warning: transport smtp failure -- see a previous warning/fatal/panic logfile record for the problem description Nov 26 19:41:51 ***REDACTED*** drkonqi-coredump-processor[29856]: "/usr/lib/postfix/bin/smtp" 29834 "/var/lib/systemd/coredump/***REDACTED***" Nov 26 19:41:51 ***REDACTED*** postfix/master[29819]: warning: process /usr/lib/postfix/bin//smtp pid 29834 killed by signal 11 Nov 26 19:41:51 ***REDACTED*** drkonqi-coredump-processor[29856]: The socket path doesn't exist @ "/run/user/51/drkonqi-coredump-launcher" Nov 26 19:41:51 ***REDACTED*** postfix/master[29819]: warning: /usr/lib/postfix/bin//smtp: bad command startup -- throttling Nov 26 19:41:51 ***REDACTED*** postfix/error[29860]: 771796E7E0: to=<***REDACTED***>, relay=none, delay=2871, delays=2870/0.45/0/0.01, dsn=4.3.0, status=deferred (unknown mail transport error) I have around three decades of C/C++ programming experience, so I took a quick look at libkdexoauth2 and didn't see anything obvious. Before I really dig into debigging this, does anyone have a suggestion or solution? BTW, I am new to Tumbleweed, so I may be missing something simple. -- Tony Walker <tony.walker.iu(a)gmail.com> PGP Key @ https://tonywalker1.github.io/ or https://keys.openpgp.org/ 9F46 D66D FF6C 182D A5AC 11E1 8559 98D1 7543 319C

4 3

Updated usbutils pull in developer packages on a non development system
by Manfred Hollstein 29 Nov '23

29 Nov '23

Hi there, On Wed, 29 Nov 2023, 04:00:58 +0100, Dominique Leuenberger wrote: > [...] > usbutils (015 -> 017) snapshot 20231127 pulls in two development packages on a non development system: $ sudo zypper -v dup -D The following 2 NEW packages are going to be installed: libusb-1_0-devel 1.0.26-1.7 systemd-devel 254.5-5.1 Looking at the hard requirements of usbutils-017-1.1.x86_64.rpm it becomes somehow obvious why: $ rpm -qp .../tumbleweed/repo/oss/x86_64/usbutils-017-1.1.x86_64.rpm -R ... pkgconfig(libudev) >= 196 pkgconfig(libusb-1.0) >= 1.0.14 Shouldn't these dependencies go into some libusb*-devel package? According to the .spec file, they are only needed for building the package (like 31 and 33): https://build.opensuse.org/package/view_file/openSUSE:Factory/usbutils/usbu… Bug report: https://bugzilla.opensuse.org/show_bug.cgi?id=1217646 While we're at this, one snapshot around 20231119 pulled in several *-devel packages, too - including the full cmake stack. I find it rather not necessary on a non development system. Cheers. l8er manfred

1 0

New Tumbleweed snapshot 20231127 released!
by Dominique Leuenberger 29 Nov '23

29 Nov '23

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: MozillaFirefox (119.0.1 -> 120.0) gstreamer-plugins-bad icewm (3.4.3 -> 3.4.4) inxi (3.3.27 -> 3.3.31) kyotocabinet (1.2.77 -> 1.2.80) libdrm (2.4.117 -> 2.4.118) nghttp2 (1.57.0 -> 1.58.0) opencc (1.1.6 -> 1.1.7) pam-config (2.9 -> 2.10) pipewire (0.3.85 -> 1.0.0) policycoreutils python-charset-normalizer (3.3.0 -> 3.3.2) python-lxml python-setproctitle (1.3.2 -> 1.3.3) restorecond tango-icon-theme tpm2-0-tss transmission (4.0.3 -> 4.0.4) usbutils (015 -> 017) wireplumber (0.4.15 -> 0.4.16) xwayland === Details === ==== MozillaFirefox ==== Version update (119.0.1 -> 120.0) Subpackages: MozillaFirefox-translations-common - Mozilla Firefox 120.0 https://www.mozilla.org/en-US/firefox/120.0/releasenotes MFSA 2023-49 (bsc#1217230) * CVE-2023-6204 (bmo#1841050) Out-of-bound memory access in WebGL2 blitFramebuffer * CVE-2023-6205 (bmo#1854076) Use-after-free in MessagePort::Entangled * CVE-2023-6206 (bmo#1857430) Clickjacking permission prompts using the fullscreen transition * CVE-2023-6207 (bmo#1861344) Use-after-free in ReadableByteStreamQueueEntry::Buffer * CVE-2023-6208 (bmo#1855345) Using Selection API would copy contents into X11 primary selection. * CVE-2023-6209 (bmo#1858570) Incorrect parsing of relative URLs starting with "///" * CVE-2023-6210 (bmo#1801501) Mixed-content resources not blocked in a javascript: pop-up * CVE-2023-6211 (bmo#1850200) Clickjacking to load insecure pages in HTTPS-only mode * CVE-2023-6212 (bmo#1658432, bmo#1820983, bmo#1829252, bmo#1856072, bmo#1856091, bmo#1859030, bmo#1860943, bmo#1862782) Memory safety bugs fixed in Firefox 120, Firefox ESR 115.5, and Thunderbird 115.5 * CVE-2023-6213 (bmo#1849265, bmo#1851118, bmo#1854911) Memory safety bugs fixed in Firefox 120 - rebased patches ==== gstreamer-plugins-bad ==== Subpackages: gstreamer-plugins-bad-lang libgstadaptivedemux-1_0-0 libgstbadaudio-1_0-0 libgstbasecamerabinsrc-1_0-0 libgstcodecparsers-1_0-0 libgstcodecs-1_0-0 libgstcuda-1_0-0 libgstisoff-1_0-0 libgstmpegts-1_0-0 libgstphotography-1_0-0 libgstplay-1_0-0 libgstplayer-1_0-0 libgstsctp-1_0-0 libgsttranscoder-1_0-0 libgsturidownloader-1_0-0 libgstva-1_0-0 libgstvulkan-1_0-0 libgstwayland-1_0-0 libgstwebrtc-1_0-0 libgstwebrtcnice-1_0-0 - Stop passing sctp=disabled and pass sctp=enabled to meson setup instead, enable build of sctp plugin. ==== icewm ==== Version update (3.4.3 -> 3.4.4) Subpackages: icewm-config-upstream icewm-default icewm-lang icewm-lite - update to 3.4.4: * Use fcsmart for capturing loadText data. * Support TIFF and WEBP in icewmbg. * More permissive parsing of a PAM image header in icesh. * Remove obsolete winoption examples and add one for plank. * Use --disable-librsvg instead of --disable-rsvg. * Add `supportsFormat` to check for support of additional image formats. * Support JXL, JP2, RAW, SVG, TGA image formats in icewmbg. * Test if a color can be considered dark for issue #715. * Brighten the color of inactive preview icons for dark themes for issue * Fix a crash when a ping timeout dialog is destroyed for issue #729. * Let icewmbg interpret command-line arguments relative to the current working directory. * Clarify prefoverride and closes #750 * When mapping a client by PID, search for the best match. * Don't enforce the use of clang++ in the debug build. * Fix ordering in the 4th configuration * Fix minor warnings from recent CMake and GCC * Translated using Weblate (Portuguese (Brazil)) ==== inxi ==== Version update (3.3.27 -> 3.3.31) - Updated to version 3.3.31: + /usr/share/doc/packages/inxi/inxi.changelog. - Updated spec file for new location of inxi at codeberg.org. ==== kyotocabinet ==== Version update (1.2.77 -> 1.2.80) - update to 1.2.80: - configure.in supports strict C99 rules. - Fixed errors of kcdirtest on BtrFS. - Fixed build warnings. ==== libdrm ==== Version update (2.4.117 -> 2.4.118) Subpackages: libdrm2 libdrm_amdgpu1 libdrm_intel1 libdrm_nouveau2 libdrm_radeon1 - update to 2.4.118: * improve SMPTE color LUT accuracy * util: factor out and optimize C8 SMPTE color LUT * util: add support for DRM_FORMAT_C[124] * util: store number of colors for indexed formats * util: add SMPTE pattern support for C4 format * util: add SMPTE pattern support for C1 format * util: add SMPTE pattern support for C2 format * modetest: add support for DRM_FORMAT_C[124] * modetest: add SMPTE pattern support for C[124] formats * intel: determine target endianness using meson * util: fix 32 bpp patterns on big-endian * util: fix 16 bpp patterns on big-endian * util: add missing big-endian RGB16 frame buffer formats * modetest: add support for parsing big-endian formats * util: add test pattern support for big-endian XRGB1555/RGB565 * util: fix pwetty on big-endian * util: add pwetty support for big-endian RGB565 * modetest: add support for big-endian XRGB1555/RGB565 * modetest: add support for DRM_FORMAT_NV{15,20,30} * modetest: switch usage to proper options grammar * xf86drm: add drmGetNodeTypeFromDevId * Sync headers with drm-next * xf86drmMode: add drmModeCloseFB() ==== nghttp2 ==== Version update (1.57.0 -> 1.58.0) - update to 1.58.0: * Update manual pages * Bump neverbleed * Bump ngtcp2 * Prefer clock_gettime if __CYGWIN__ defined * Do not require strict c++ mode * nghttpx: Stricter transfer-encoding checks * Refactor character comparison * Integration servertester h3 * integration: Enable http3 test with cmake ==== opencc ==== Version update (1.1.6 -> 1.1.7) Subpackages: libopencc1_1 opencc-data - update to 1.1.7: * Added python package rebuild on commit to verify package generation (#822). * Support Python 3.12 and Node 20, remove builds for Python 3.7 and Node 16 (#820). * Add support of CMake config modules (#763). * Several other minor fixes. - drop fix-soversion.patch (obsolete) ==== pam-config ==== Version update (2.9 -> 2.10) - Update to version 2.10 - Enable session and account support for kanidm and himmelblau ==== pipewire ==== Version update (0.3.85 -> 1.0.0) Subpackages: gstreamer-plugin-pipewire libpipewire-0_3-0 pipewire-alsa pipewire-jack pipewire-lang pipewire-libjack-0_3 pipewire-modules-0_3 pipewire-pulseaudio pipewire-spa-plugins-0_2 pipewire-spa-tools pipewire-tools - Update to version 1.0.0 (El Presidente): * Highlights - Fix a memfd/dmabuf leak when uploading buffers while shutting down. - Handle concurrent jack_port_get_buffer() calls because ardour seems to be doing this. - Improve time reporting (less jitter) in ALSA when using IRQ. - Many doc improvements. * PipeWire - Respect PIPEWIRE_DLCLOSE everywhere, remove pw_in_valgrind(). - Remove a warning when a client tries to change ignored properties. * Modules - Fix a memfd/dmabuf leak when uploading buffers while shutting down. - Fix a potential segfault when copying mix structures. (#3658) - Avoid races in setrlimit in module-rt. - Fix a memory leak in filter-chain. - Set rtp.ptime on senders, not receivers. - The ROC modules were ported to ROC 0.3 * SPA - Improve time reporting (less jitter) in ALSA when using IRQ. (#3657) - Add latency param query in libcamera. - Fix some compiler warnings. - The EVL plugin was updated. * Bluetooth - LC3 codec and compatibility improvements. * Pulse server - Fix emission of events when a sink/source state changes. (#3660) * JACK - Improve transport and time handling. Use unique ids to make consistent snapshots of the current time and transport. - Avoid enumerating port params that we are not going to use. - Optimize buffer reuse. - Handle concurrent jack_port_get_buffer() calls because ardour seems to be doing this. (#3632) * Docs - Many doc improvements. - Add man pages for pw-dump, pw-loopback, modules, pipewire-pulse. - Manpages are now made with Doxygen. - Add docs for pulse-modules ==== policycoreutils ==== Subpackages: policycoreutils-lang policycoreutils-python-utils python3-policycoreutils - Change deprecated `%patch1 -p1` syntax to supported `%patch -P1 -p1` (bsc#1216669) ==== python-charset-normalizer ==== Version update (3.3.0 -> 3.3.2) - update to 3.3.2: * Unintentional memory usage regression when using large payload that match several encoding (#376) * Regression on some detection case showcased in the documentation (#371) * Noise (md) probe that identify malformed arabic representation due to the presence of letters in isolated form * Optional mypyc compilation upgraded to version 1.6.1 for Python >= 3.8 * Improved the general detection reliability based on reports from the community ==== python-lxml ==== - Add libxml2212-tests.patch to fix tests with new libxml2 ==== python-setproctitle ==== Version update (1.3.2 -> 1.3.3) - update to 1.3.3: * Add support for Python 3.12 * Fix package metadata to include Python 3.11, 3.12. ==== restorecond ==== - Change deprecated `%patch1 -p1` syntax to supported `%patch -P1 -p1` (bsc#1216669) ==== tango-icon-theme ==== - Use %patch -P N instead of deprecated %patchN. ==== tpm2-0-tss ==== Subpackages: libtss2-esys0 libtss2-mu0 libtss2-rc0 libtss2-sys1 libtss2-tctildr0 - libtss2-fapi1 requires system-user-tss for tmpfile creation ==== transmission ==== Version update (4.0.3 -> 4.0.4) Subpackages: transmission-common transmission-gtk transmission-gtk-lang - Update to version 4.0.4: + Fixed bug in sending torrent metadata to peers. + Avoid unnecessary heap memory allocations. + Fixed filename collision edge case when renaming files. + Fixed locale errors that broke number rounding when displaying statistics, e.g. upload / download ratios. + Always use a fixed-length key query in tracker announces. This isn't required by the spec, but some trackers rely on that fixed length because it's common practice by other BitTorrent clients. + Fixed potential Windows crash when getstdhandle() returns NULL. + Fixed 4.0.0 bug where the port numbers in LDP announces are sometimes malformed. + Fixed a bug that prevented editing the query part of a tracker URL. + Fixed a bug where Transmission may not announce LPD on its listening interface. + Made small performance improvements in libtransmission. + Qt Client: - Fixed torrent name rendering when showing magnet links in compact view. - Fixed bug that broke the "Move torrent file to trash" setting. - Fixed Qt 6.4 deprecation warning. - Fixed poor resolution of Qt application icon. + GTK Client: Fixed missing 'Remove torrent' tooltip. + Web Client: - Don't show null as a tier name in the inspector's tier list. - Fixed truncated play / pause icons. - Fixed overflow when rendering peer lists and made speed indicators honor prefers-color-scheme media queries. - Made the main menu accessible even on smaller displays. + transmission-cli: - Fixed "no such file or directory" warning when adding a magnet link. - Fixed bug that caused the wrong decimal separator to be used in some locales. + transmission-remote: Fixed display bug that failed to show some torrent labels. + Everything Else: - Ran all PNG files through lossless compressors to make them smaller. - Fixed potential build issue when compiling on macOS with gcc. ==== usbutils ==== Version update (015 -> 017) - update to 017: * lsusb: fix up [unknown] vendor and product strings. * lsusb: fix build warning for dump_billboard_alt_mode_capability_desc() * lsusb: add fallback names for 'lsusb -v' output * names: simplify get_vendor_product_with_fallback() a bit * rezso (1): * Honor system libdir and includedir * usbutils 016 * usbutils: lsusb-t: print entries for devices with no interfaces * Fix a typo in usb-spec.h * lsusb.py.in: Display (device) power/wakeup via -w option. * Fix an incorrect length value in hid descriptor. * Fix misalignments in hid device descripptor. * Use bigger buffer to place speed value string * lsusb -h returns an error * lsusb -h fixups * lsusb -t: sort in bus order, not reverse order * lsusb -t: print ports and busses and devices with same width * lsusb -t: assign_interface_to_parent() fixups * lsusb.8.in: fix up missing '-' in text * README.md: add source location * lsusb.py: fix up wakeup logic for devices that do not support it * lsusb.py.in: add another default path for usb.ids * names.c: if a string can not be found in the usb.ids file, return [unknown] * lsusb-t: if a driver is not bound to an interface, report "[none]" * Generate usbutils.pc pkgconfig file * usbreset: Allow idProduct and idVendor to be 0 * usb-devices: make shellcheck happy * lsusb: Add function that sorts the output by device ID. * lsusb: Additional sorting by bus number. * lsusb: This is a more compact implementation of the device list sort implemented within this pull request. The output remains the same as the one demonstrated in the previous commit. ==== wireplumber ==== Version update (0.4.15 -> 0.4.16) Subpackages: libwireplumber-0_4-0 wireplumber-audio wireplumber-lang - Update to version 0.4.16: * Additions: - Added a new "sm-objects" script that allows loading objects on demand via metadata entries that describe the object to load; this can be used to load pipewire modules, such as filters or network sources/sinks, on demand - Added a mechanism to override device profile priorities in the configuration, mainly as a way to re-prioritize Bluetooth codecs, but this also can be used for other devices - Added a mechanism in the endpoints policy to allow connecting filters between a certain endpoint's virtual sink and the device sink; this is specifically intended to allow plugging a filter-chain to act as equalizer on the Multimedia endpoint - Added wp_core_get_own_bound_id() method in WpCore * Changes: - PipeWire 0.3.68 is now required - policy-dsp now has the ability to hide hardware nodes behind the DSP sink to prevent hardware misuse or damage - JSON parsing in Lua now allows keys inside objects to be without quotes - Added optional argument in the Lua JSON parse() method to limit recursions, making it possible to partially parse a JSON object - It is now possible to pass nil in Lua object constructors that expect an optional properties object; previously, omitting the argument was the only way to skip the properties - The endpoints policy now marks the endpoint nodes as "passive" instead of marking their links, adjusting for the behavior change in PipeWire 0.3.68 - Removed the "passive" property from si-standard-link, since only nodes are marked as passive now * Fixes: - Fixed the wpctl clear-default command to completely clear all the default nodes state instead of only the last set default - Reduced the amount of globals that initially match the interest in the object manager - Used an idle callback instead of pw_core_sync() in the object manager to expose tmp globals - Remove patches included upstream: * 0001-object-manager-reduce-the-amount-of-globals-that-initially.patch * 0002-object-manager-use-an-idle-callback-to-expose-tmp-globals.patch * 0001-policy-dsp-add-ability-to-hide-parent-nodes.patch - Update split-config-file.py ==== xwayland ==== - This release contains the following patches mentioned in previous sle15 releases * U_Xext-fix-invalid-event-type-mask-in-XTestSwapFakeInp.patch: fixes regression introduced with security update for CVE-2022-46340 (bsc#1205874) * U_bsc1216135-Xi-randr-fix-handling-of-PropModeAppend-Prepend.patch: fix handling of PropModeAppend/Prepend ((CVE-2023-5367, ZDI-CAN-22153, bsc#1216135) * U_bsc1216261-0001-mi-fix-CloseScreen-initialization-order.patch, U_bsc1216261-0002-fb-properly-wrap-unwrap-CloseScreen.patch: Server Damage Object Use-After-Free Local Privilege Escalation Vulnerability (CVE-2023-5574, ZDI-CAN-21213, bsc#1216261) * U_bsc1216261-0003-dix-always-initialize-pScreen-CloseScreen.patch: fixes a regresion, which can trigger a segfault in Xwayland on exit, introduced by U_bsc1216261-0002-fb-properly-wrap-unwrap-CloseScreen.patch (CVE-2023-5574, ZDI-CAN-21213, bsc#1216261)

2 1

Slowroll arch availability
by Felix Miata 28 Nov '23

28 Nov '23

https://en.opensuse.org/openSUSE:Slowroll and http://cdn.opensuse.org/slowroll/repo/oss/ make Slowroll look like it's x86_64 only. If my observation is correct, is it expected to stay that way? I thought I saw mention in a mailing list post or the forums that i586/i686 already existed, but mirrors I checked seem to be just the one. -- Evolution as taught in public schools is, like religion, based on faith, not based on science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata

2 2

Sudo announcement - upcoming changes
by Otto Hollmann 27 Nov '23

27 Nov '23

Hi all, I'm happy to inform you about upcoming changes in our openSUSE implementation of sudo. The first change is splitting configuration files between /etc and /usr/etc. More information about why we are introducing this change can be found here [1]. Sudo will read configuration files in the following order: /etc/sudoers, /usr/etc/sudoers. Our distribution file will be installed in /usr/etc/sudoers. If there is no /etc/sudoers file, the command visudo will open /usr/etc/sudoers and save the result as /etc/sudoers. If /etc/sudoers file already exists, there is no change in visudo behavior - it will open and edit /etc/sudoers. Big thanks to sudo upstream and Jason Sikes for this change. The second change relates to the configuration "Defaults targetpw" SUSE traditionally ships sudo with "Defaults targetpw". That allows any user in the system to use sudo without configuration by authenticating as the target user (usually root). An alternative authentication scheme used by some Linux distributions allows users who are members of a specific group to authenticate as root by typing their own password. So far, this model required manual configuration. To make this approach easier, we are now introducing the following optional packages: * sudo-policy-wheel-auth-self * sudo-policy-sudo-auth-self * system-group-sudo If installed, users in the wheel group (first package) or sudo group (second package) will be asked for their password instead of the password of the target account when executing the sudo command. There is no change for users who are not in those special groups. sudo will continue to prompt for the target password for those users. So updating sudo is safe in any case. The third package (which will be installed as a dependency for the package sudo-policy- sudo-auth-self) creates a configuration file for systemd-sysusers, ensuring that the system group "sudo" will be created. *Please note the meaning of the wheel group is not well defined, so adding users to that group may have effects outside the scope of sudo.* In addition, those packages also install polkit policies so applications using polkit will be also allowed to authenticate in the same way. [1] https://en.opensuse.org/openSUSE:Packaging_UsrEtc Regards, Otto Hollmann

9 23