July 2017 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] zypper dup --no-recommends removes installed packages (split from Recommended and *-lang packages conflict)
by Mykola Krachkovsky 27 Jul '17

27 Jul '17

Hi, Why "zypper dup --no-recommends" doing this: The following 110 packages are going to be REMOVED: kcoreaddons-lang kded-lang kdelibs4support-lang kdoctools-lang kfilemetadata5-lang kinit-lang kio-lang kpackage-lang kpeople5-lang kross-lang kservice-lang … There are updates of this packages. I've believed that --no-recommends option rules only installing of new packages but not updating, according to man: --no-recommends Do not install recommended packages, but only required ones. But it seems in this case this option also blocking that packages from update and while updating corresponding bin packages version conflict solved to remove this packages. In my opinion that's not a correct behavior. -- Kind regards, Mykola Krachkovsky -- Найкращі побажання, Микола Крачковський

5 15

Re: [opensuse-factory] banned for lifers
by Knurpht - Gertjan Lettink 27 Jul '17

27 Jul '17

Op dinsdag 25 juli 2017 20:43:37 CEST schreef Patrick Shanahan: > * Knurpht - Gertjan Lettink <knurpht(a)opensuse.org> [07-25-17 14:30]: > > > so you and I are still present after richard's rant :) > > > > > > do you know who was banned? perhaps Brian White... > > > > Please note, that this was not Richard's rant, this was a unanimous board > > decision. And that there is no need to ridicule anything about it. No need > > to CC the list, that is. > > you obviously did not read the "oooops". the on-list post was NOT > intended, mail was to be private but so much for that. :( Cheers for sending a private mail. Shit happens.( I'm the one that posted a reply to board internal ML to the opensuse@ list :P). Nothing personal, Patrick. My statement still stands, it was not Richard's rant. This had been on the board's dish for a long time. -- Gertjan Lettink, a.k.a. Knurpht openSUSE Board Member openSUSE Forums Team -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 11

[opensuse-factory] [openQA] Why my needles created in o3 via webui not visible yet in git tree
by Normand 27 Jul '17

27 Jul '17

Hello Oliver, I added yesterday morning some needles via webui on o3 (1) and did not saw them yet this morning in github (2) Does the update of github from o3 a manual process ? (1) https://openqa.opensuse.org/ one of them partitioning_raid-custom-size-200MB-20170726* (2) https://github.com/os-autoinst/os-autoinst-needles-opensuse/commits/master -- Michel Normand -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] Resume on (new) laptop with encrypted disk with TW
by H.Merijn Brand 27 Jul '17

27 Jul '17

I have a new laptop, installed with an SSD for the OS (TW) and a second encrypted disk for the data and homes. When I close the lid, the laptop goes into hibernation, when I open the lid, I get a black screen with a cursor (that won't move when I use the touchpad). After a while the system reboots. I'd like the laptop to be functional when I open after hibernation :) Anything I missed? Linux 4.11.8-2-default [openSUSE Tumbleweed 20170725] HP ZBook 15G3 Core(TM) i7-6820HQ CPU @ 2.70GHz/3374(8) x86_64 15927 Mb $ di Filesystem Mount Size Used Avail %Used fs Type /dev/nvme0n1p6 / 220.7G 26.4G 194.4G 12% xfs /dev/mapper/work /data 465.5G 294.5G 171.1G 63% xfs devtmpfs /dev 7.8G 0.0G 7.8G 0% devtmpfs tmpfs /dev/shm 7.8G 0.0G 7.7G 0% tmpfs tmpfs /run 7.8G 0.0G 7.8G 0% tmpfs tmpfs /run/user/203 1.6G 0.0G 1.6G 0% tmpfs tmpfs /sys/fs/cgroup 7.8G 0.0G 7.8G 0% tmpfs $ lsblk -f NAME FSTYPE LABEL UUID MOUNTPOINT sda └─sda1 └─work /data nvme0n1 ├─nvme0n1p1 ├─nvme0n1p2 ├─nvme0n1p3 ├─nvme0n1p5 [SWAP] └─nvme0n1p6 / $ cat /etc/crypttab work UUID=71f9cd15-37b8-4766-b566-28453d162197 none luks,timeout=180 $ cat /etc/fstab UUID=afc52394-b143-47fe-ac57-b360ec8a18b1 swap swap defaults 0 0 UUID=09931dfc-9304-4b65-9c20-abd23dc8a4ee / xfs defaults 1 1 /dev/mapper/work /data xfs defaults 0 2 /dev/disk/by-label/Data /mnt xfs noauto,defaults 1 1 $ rpm -q xfsprogs kded plasma5-session kded-5.36.0-1.1.x86_64 plasma5-session-5.10.4-1.1.noarch xfsprogs-4.9.0-2.2.x86_64 $ inxi -G -c 16 Graphics: Card-1: Intel HD Graphics 530 Card-2: Advanced Micro Devices [AMD/ATI] Venus XTX [Radeon HD 8890M / R9 M275X/M375X] Display Server: X.Org 1.18.3 drivers: ati,radeon,intel (unloaded: modesetting,fbdev,vesa) Resolution: 1920x1080(a)60.00hz, 1920x1200(a)59.95hz GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 4.0, 256 bits) GLX Version: 3.0 Mesa 17.1.5 -- H.Merijn Brand http://tux.nl Perl Monger http://amsterdam.pm.org/ using perl5.00307 .. 5.27 porting perl5 on HP-UX, AIX, and openSUSE http://mirrors.develooper.com/hpux/ http://www.test-smoke.org/ http://qa.perl.org http://www.goldmark.org/jeff/stupid-disclaimers/

1 0

[opensuse-factory] package rename question
by Jim Fehlig 27 Jul '17

27 Jul '17

Hi All, While converting libvirt-python to singlespec, I had to rename it to python-libvirt-python. According to [1], package renaming appears to be a manual process. I've done the rename [2] and now want to submit it to Factory. The wiki page is a bit sparse on that. Do I simply submit the renamed package along with sending a request to drop the previously named one? Regards, Jim [1] https://en.opensuse.org/openSUSE:Package_dependencies#Renaming_a_package [2] https://build.opensuse.org/package/show/Virtualization/python-libvirt-python -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] shutdown/startup and network
by Michal Hlavac 27 Jul '17

27 Jul '17

Hi, with new fast laptop I discovered some strange behaviour. After booting docker engine and virtualbox has no internet. I had to restart docker and vboxdrv services. Then it works. And when I stop akonadi before shutdown, it goes very quickly down, but witout stoping I had to wait about minute or more to shutdown. Is it possible that those services start before network manager on boot or akonadi can't shutdown properly because network is already stopped on shutdown? I am asking before I create issue in bugzilla. thanks, m. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] This should show my original post using gmx
by Roman Bysh 27 Jul '17

27 Jul '17

Hi all, Looks like Yahoo wasn't working well with the ML so I switched to gmx.com. -- Cheers! Roman -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 3

[opensuse-factory] Leap 42.3 aarch64 and upgrade repo
by Alejandro Bonilla 26 Jul '17

26 Jul '17

Hi - When is Leap 42.3 expected for aarch64 ? Also https://en.opensuse.org/SDB:System_upgrade#Running_the_Upgrade Claims that a # sed -i 's,42\.2,42.3,g' /etc/zypp/repos.d/* Would do the trick, but 42.3 doesn’t exist within http://download.opensuse.org/ports/update/ unless inside of http://download.opensuse.org/ports/update/leap/42.3/oss/ Is there a new directory structure or something that gets organized after its released? Also http://download.opensuse.org/ports/aarch64/distribution/leap/42.3-Current/ Has a different naming with the addition of -Current. Thanks, Alejandro

4 3

[opensuse-factory] Is there a problem with mail delay today?
by Roman Bysh 26 Jul '17

26 Jul '17

Hi, Is anyone experiencing a very long delay with opensuse-factory(a)opensuse.org I used to see my response appear in several seconds. Today I didn't even see my first questions appear in Thunderbird. -- Cheers! Roman -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

14 26

[opensuse-factory] Have a black screen after installing Nvidia rpms with drm-kmp-default
by Roman Bysh 26 Jul '17

26 Jul '17

Hi, The Nvidia rpms were working with builds before "Build 330" of Leap 42.3. Now I get a black screen so I have download and use the driver from the Nvidia site in order for me to see the plasma 5 desktop. -- Cheers! Roman -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0