April 2011 - openSUSE Build Service - openSUSE Mailing Lists

[opensuse-buildservice] Expired OBS Keys?
by King Thorin 02 Jul '13

02 Jul '13

It seems the OBS Security key (keyid 79EAFD54) on keys.gnupg.net has expired (2011-Apr-2). Would it be possible for someone to update it? I know an updated key has been generated (which expires 2013) as it can be found here: http://download.opensuse.org/repositories/security:/OpenVAS:/STABLE:/v4/xUb… Further details can be found via: http://lists.wald.intevation.org/pipermail/openvas-distro/2011-April/thread… Basically the issue came to light when following instructions: http://www.openvas.org/install-packages.html#openvas4_ubuntu_obs -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

4 7

[opensuse-buildservice] Use solid state disks [ssd] to improve obs build times.
by doiggl＠velocitynet.com.au 30 Jul '12

30 Jul '12

Hello With the opensuse build service [obs] getting more usage every day I wonder if this would make a diffence :- 1. Use solid state disks [ssd] to improve build times of package rpms on, perhaps point the BuildRoot or _tmppath to the ssd's Reason for asking. Improve the packaging times during busy times on obs. Cheers Glenn. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

8 17

[opensuse-buildservice] openSUSE 10.3 runs out of maintenance
by Adrian Schröter 21 Feb '12

21 Feb '12

Hello, is usual, openeSUSE 10.3 runs out of maintenance and I will remove all repos building against it in OBS. openSUSE:10.3 project has been moved to DISCONTINUED: namespace as announced a while ago. bye adrian -- Adrian Schroeter SUSE Linux Products GmbH email: adrian(a)suse.de -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 2

[opensuse-buildservice] distro independant rpms and debs for distro independant data?
by Paul Elliott 31 Jan '12

31 Jan '12

This question concerns both the OBS and packaging so I am sending to both lists. I am currently working on packaging the Swiss Ephemeris http://www.astro.com/swisseph/ I am currently at the planning scheming and experimentation stage. First I will do the library. But then there is the data. The data is about 60 files not all of which will be wanted by all people. There may be ways of grouping but I am not sure. Perhaps one rpm per file. The Web page says: > For this extended timespan the ephemeris requires 32 Mbytes of ephemeris > files. It would be a shame if this had to repeat for each distro. There may be other projects with even more data. This data is distro and architecture independent. I understand that there should be different rpm per distro because different distros link libraries differently and do other details differently. There could be rpm version dependencies. Perhaps one distro can not understand rpms from another distro as raw data. My question is this is there a lowest common denominator rpm format that can represent pure data (and a few text licensing files) and be understood by all distros? How would you get the build service to produce such rpms? After you produced them how would you get the build service to serve them for all rpm based distros? Same question for debs and the debian based distros? Unrelated question: a while back OBS debian binary repositories were debian compatible but the source repositories were not. Is this still true? -- Paul Elliott 1(512)837-1096 pelliott(a)BlackPatchPanel.com PMB 181, 11900 Metric Blvd Suite J http://www.free.blackpatchpanel.com/pme/ Austin TX 78758-3117

7 8

[opensuse-buildservice] Installing on Mandriva via OBS repo
by Nicholas Peterson 20 Oct '11

20 Oct '11

Hi All, I am trying to install my program on Mandriva but can't seem to add the OBS repository. It seems that the command urpmi.addmedia doesn't work with the normal RPM PM. Someone on IRC mentioned that I could specify a different type for the repository in my OBS raw config to automatically generate a urpmi compatible repo. What do I put as the type for my Mandriva repo to make it urpmi compatible? Thanks, Nick -- Nick Peterson Programmer @ Siepel Lab Cell: (480) 600-2544 -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

7 31

Re: [opensuse-buildservice] compiler flags issue on openSUSE 11.2 (gcc4.4.1) and factory
by Di Pe 18 Oct '11

18 Oct '11

OK, did that but halts before it can finish the configure. Is there another way to access the logs? an alternative solution would be: ln -s /usr/include/et/com_err.h /usr/include/com_err.h that's how I got it to work on my own box. But I could not do that in the build service because I was getting permission denied errors. Thanks # # %configure # cat config.log # %{__make} %{?_smp_mflags} # # %install # #%{__rm} -rf %{buildroot} #not needed # %{__make} DESTDIR=%{buildroot} install # Using BUILD_ROOT=/abuild/root_8/.mount Using BUILD_ARCH=x86_64:i686:i586:i486:i386 Doing xen build in /dev/abuild/8_root build22 started "build msktutil.spec" at Fri Apr 16 22:36:06 UTC 2010. Building msktutil for project 'home:dipe' repository 'openSUSE_11.2' arch 'x86_64' srcmd5 'b92ec11f13803a767e9d68f94555f1b4' processing specfile /abuild/root_8/.build-srcdir/msktutil.spec ... running changelog2spec --target rpm --file /abuild/root_8/.build-srcdir/msktutil.spec init_buildsystem --cachedir /var/cache/build --prepare --clean --rpmlist /abuild/root_8/.build.rpmlist /abuild/root_8/.build-srcdir/msktutil.spec build rpmlint-Factory ... preinstalling aaa_base... preinstalling acl... preinstalling attr... preinstalling bash... preinstalling coreutils... preinstalling diffutils... preinstalling filesystem... preinstalling fillup... preinstalling glibc... preinstalling grep... preinstalling insserv... preinstalling libacl... preinstalling libattr... preinstalling libbz2-1... preinstalling libgcc44... preinstalling libxcrypt... preinstalling m4... preinstalling libncurses5... preinstalling pam... preinstalling permissions... preinstalling libreadline6... preinstalling rpm... preinstalling sed... preinstalling tar... preinstalling zlib... preinstalling libselinux1... preinstalling liblzma0... preinstalling libcap2... preinstalling libpcre0... preinstalling libpopt0... preinstalling libelf1... preinstalling liblua5_1... preinstalling util-linux... preinstalling perl-base... preinstalling libdb-4_5... preinstalling libsepol1... preinstalling libblkid1... preinstalling libuuid1... copying packages... reordering...done booting XEN kernel ... xm create -c /var/run/bsworker_8/build/xen.conf name=build:8_root memory=750 disk=phy:/dev/abuild/8_root,hda1,w disk=phy:/dev/abuild/8_swap,hda2,w extra=quiet init=/.build/build panic=1 console=ttyS0 Using config file "/var/run/bsworker_8/build/xen.conf". Started domain build:8_root PCI: Fatal: No config space access function found i8042.c: No controller found. doing fast boot FATAL: Module ext4 not found. Creating device nodes with udev Boot logging started on /dev/xvc0(/dev/console) at Fri Apr 16 22:36:29 2010 Waiting for device /dev/hda1 to appear: ok fsck 1.41.1 (01-Sep-2008) [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/hda1 /dev/hda1: clean, 2561/1826816 files, 185686/7296000 blocks fsck succeeded. Mounting root device read-only. Mounting root /dev/hda1 mount -o ro,defaults -t ext3 /dev/hda1 /root mount: can't find /root/proc in /etc/fstab or /etc/mtab 2nd stage started in virtual machine machine type: x86_64 swapon on /dev/hda2 swapon: /dev/hda2: found swap v1 signature string for 4 KiB PAGE_SIZE swapon: /dev/hda2: pagesize=4096, swapsize=2097152000, devsize=2097152000 mount: none already mounted or //proc busy mount: according to mtab, none is already mounted on /proc logging output to //.build.log... processing specfile /.build-srcdir/msktutil.spec ... init_buildsystem --cachedir /var/cache/build --repository zypp:// /.build-srcdir/msktutil.spec build rpmlint-Factory ... running aaa_base preinstall script running aaa_base postinstall script Updating etc/sysconfig/language... Updating etc/sysconfig/backup... Updating etc/sysconfig/boot... Updating etc/sysconfig/kernel... Updating etc/sysconfig/suseconfig... Updating etc/sysconfig/clock... Updating etc/sysconfig/proxy... Updating etc/sysconfig/windowmanager... Updating etc/sysconfig/sysctl... Updating etc/sysconfig/cron... Updating etc/sysconfig/news... Updating etc/sysconfig/shutdown... Updating etc/passwd...unchanged Updating etc/group...unchanged Updating etc/shadow...new initializing rpm db... installing filesystem-11.2-12.2 installing pcre-7.9.0-2.3.1 installing terminfo-base-5.6-91.2 installing glibc-2.10.1-10.4 installing audit-libs-1.7.13-4.2 installing fillup-1.42-245.3 installing gdbm-1.8.3-373.7 installing glibc-locale-2.10.1-10.4 installing keyutils-libs-1.2-109.2 installing libattr-2.4.44-2.2 installing libbz2-1-1.0.5-36.6 installing libcap2-2.16-4.2 installing libdb-4_5-4.5.20-98.4 installing libelf1-0.142-3.7 installing libgmp3-4.3.1-2.2 installing libltdl7-2.2.6-47.7 installing liblua5_1-5.1.4-6.2 installing liblzma0-4.999.9beta-2.2 installing libpopt0-1.13-4.2 installing libselinux1-2.0.80-5.2 installing libsepol1-2.0.36-2.2 installing libxcrypt-3.0.2-3.2 installing net-tools-1.60-734.1 installing patch-2.5.9.122-2.1 installing perl-base-5.10.0-72.5 installing zlib-1.2.3-140.2 installing libncurses5-5.6-91.2 installing libpcre0-7.9.0-2.3.1 installing attr-2.4.44-2.2 installing file-5.03-2.2 installing libacl-2.2.48-2.2 installing libreadline6-6.0-18.3 installing libzio-0.99-3.2 installing perl-5.10.0-72.5 installing acl-2.2.48-2.2 installing bash-4.0-18.3 installing build-compare-2009.10.14-2.2.3 installing brp-check-suse-1.0-23.2 installing build-2009.09.23-2.2 installing insserv-1.13.0-2.2 installing libcom_err2-1.41.9-3.1 installing libgcc44-4.4.1_20090817-2.3.4 installing libgomp44-4.4.1_20090817-2.3.4 installing libuuid1-2.16-4.5.1 installing bzip2-1.0.5-36.6 installing cracklib-2.8.13-2.2 installing libmpfr1-2.4.1-3.2 installing libopenssl0_9_8-0.9.8k-3.4 installing less-436-3.2 installing info-4.13a-3.2 installing libcom_err-devel-1.41.9-3.1 installing cpio-2.10-4.2 installing diffutils-2.8.7-145.2 installing findutils-4.4.0-46.2 installing gawk-3.1.6-26.2 installing gzip-1.3.12-100.4 installing libblkid1-2.16-4.5.1 installing libstdc++44-4.4.1_20090817-2.3.4 installing libtool-2.2.6-47.7 installing m4-1.4.13-2.2 installing make-3.81-130.2 installing sed-4.1.5-130.2 installing tar-1.21-4.2 installing binutils-2.19.51-10.26.4 installing grep-2.5.4-4.2 installing texinfo-4.13a-3.2 installing pam-1.1.0-3.2 installing login-3.40-2.1 installing autoconf-2.63-5.2 installing libgmpxx4-4.3.1-2.2 installing gettext-runtime-0.17-65.2 installing coreutils-7.1-3.2 installing linux-kernel-headers-2.6.31-3.4 post linux-kernel-headers-2.6.31-3.4 /var/tmp/rpm-tmp.w3dgsM 1 installing automake-1.11-6.2 installing sysvinit-2.86-215.2 installing timezone-2009p-1.1.1 WARNING: Not updating /etc/localtime with new zone file installing libppl7-0.10.2-5.2 installing cvs-1.12.12-155.2 installing cyrus-sasl-2.1.23-3.1 installing krb5-1.7-6.1 installing psmisc-22.7-8.2 installing groff-1.18.1.1-172.173.2 Updating etc/sysconfig/suseconfig... installing libldap-2_4-2-2.4.17-5.3 installing glibc-devel-2.10.1-10.4 installing gettext-tools-0.17-65.2 installing libppl_c2-0.10.2-5.2 installing man-2.5.2-22.2 Updating etc/sysconfig/cron... installing aaa_base-11.2-43.45.1 Updating etc/sysconfig/language... Updating etc/sysconfig/backup... Updating etc/sysconfig/boot... Updating etc/sysconfig/kernel... Updating etc/sysconfig/suseconfig... Updating etc/sysconfig/clock... Updating etc/sysconfig/proxy... Updating etc/sysconfig/windowmanager... Updating etc/sysconfig/sysctl... Updating etc/sysconfig/cron... Updating etc/sysconfig/news... Updating etc/sysconfig/shutdown... Updating etc/passwd...unchanged Updating etc/group...unchanged Updating etc/shadow...unchanged installing cyrus-sasl-devel-2.1.23-3.1 installing keyutils-devel-1.2-109.2 installing libbz2-devel-1.0.5-36.6 installing libstdc++44-devel-4.4.1_20090817-2.3.4 installing zlib-devel-1.2.3-140.2 installing libcloog0-0.15.7+ppl-2.2 installing netcfg-11.1-2.2 warning: /etc/HOSTNAME created as /etc/HOSTNAME.rpmnew installing permissions-2009.10.07.1653-2.1 Updating etc/sysconfig/security... installing libopenssl-devel-0.9.8k-3.4 installing krb5-devel-1.7-6.1 installing post-build-checks-1.0-66.1 installing cpp44-4.4.1_20090817-2.3.4 installing pam-modules-11.2-4.1 installing util-linux-2.16-4.5.1 installing rpm-4.7.1-6.7.3 Updating etc/sysconfig/services... installing cpp-4.4-4.2 installing openldap2-devel-2.4.17-5.3 installing rpmlint-mini-1.0-219.3 installing gcc44-4.4.1_20090817-2.3.4 installing rpmlint-Factory-1.0-51.1 installing gcc-4.4-4.2 installing gcc44-c++-4.4.1_20090817-2.3.4 installing gcc-c++-4.4-4.2 removing nis flags from //etc/nsswitch.conf... now finalizing build dir... Starting SuSEconfig, the SuSE Configuration Tool... Running in full featured mode. Reading /etc/sysconfig and updating the system... Executing /sbin/conf.d/SuSEconfig.groff... Executing /sbin/conf.d/SuSEconfig.permissions... Finished. ----------------------------------------------------------------- I have the following modifications for msktutil.spec: 4c4 < Release: 1 --- > Release: 43.1 ----------------------------------------------------------------- ----- building msktutil.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --define 'disturl obs://build.opensuse.org/home:dipe/openSUSE_11.2/b92ec11f13803a767e9d68f945…' /usr/src/packages/SOURCES/msktutil.spec Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.vXH1X7 + umask 022 + cd /usr/src/packages/BUILD + cd /usr/src/packages/BUILD + rm -rf msktutil-0.4 + /usr/bin/bzip2 -dc /usr/src/packages/SOURCES/msktutil-0.4.tar.bz2 + /bin/tar -xvvf - /bin/tar: Record size = 8 blocks drwxr-xr-x jknight/jknight 0 2010-03-16 05:12 msktutil-0.4/ -rw-r--r-- jknight/jknight 6323 2010-03-16 05:12 msktutil-0.4/msktconf.cpp -rw-r--r-- jknight/jknight 10736 2010-03-16 05:12 msktutil-0.4/msktkrb5.cpp -rw-r--r-- jknight/jknight 5470 2010-03-16 05:12 msktutil-0.4/krb5wrap.h -rw-r--r-- jknight/jknight 18011 2010-03-16 05:12 msktutil-0.4/LICENSE -rw-r--r-- jknight/jknight 1894 2010-03-16 05:12 msktutil-0.4/README -rwxr-xr-x jknight/jknight 152439 2010-03-16 05:12 msktutil-0.4/configure -rw-r--r-- jknight/jknight 10414 2010-03-16 05:12 msktutil-0.4/msktutil.interactive -rw-r--r-- jknight/jknight 3274 2010-03-16 05:12 msktutil-0.4/configure.in drwxr-xr-x jknight/jknight 0 2010-03-16 05:12 msktutil-0.4/debian/ -rw-r--r-- jknight/jknight 648 2010-03-16 05:12 msktutil-0.4/debian/control -rwxr-xr-x jknight/jknight 2178 2010-03-16 05:12 msktutil-0.4/debian/rules -rw-r--r-- jknight/jknight 2009 2010-03-16 05:12 msktutil-0.4/debian/changelog -rw-r--r-- jknight/jknight 651 2010-03-16 05:12 msktutil-0.4/debian/postinst -rw-r--r-- jknight/jknight 340 2010-03-16 05:12 msktutil-0.4/debian/cron-daily.sh -rw-r--r-- jknight/jknight 643 2010-03-16 05:12 msktutil-0.4/debian/copyright -rw-r--r-- jknight/jknight 1197 2010-03-16 05:12 msktutil-0.4/Makefile.in -rw-r--r-- jknight/jknight 5931 2010-03-16 05:12 msktutil-0.4/msktname.cpp -rw-r--r-- jknight/jknight 25907 2010-03-16 05:12 msktutil-0.4/msktutil.cpp -rw-r--r-- jknight/jknight 2403 2010-03-16 05:12 msktutil-0.4/config.h.in -rw-r--r-- jknight/jknight 27478 2010-03-16 05:12 msktutil-0.4/msktldap.cpp -rw-r--r-- jknight/jknight 12406 2010-03-16 05:12 msktutil-0.4/msktutil.M -rw-r--r-- jknight/jknight 9043 2010-03-16 05:12 msktutil-0.4/msktutil.h -rw-r--r-- jknight/jknight 1330 2010-03-16 05:12 msktutil-0.4/INSTALL -rw-r--r-- jknight/jknight 2978 2010-03-16 05:12 msktutil-0.4/ChangeLog -rw-r--r-- jknight/jknight 7846 2010-03-16 05:12 msktutil-0.4/msktpass.cpp -rw-r--r-- jknight/jknight 6816 2010-03-16 05:12 msktutil-0.4/krb5wrap.cpp + STATUS=0 + '[' 0 -ne 0 ']' + cd msktutil-0.4 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.eZpFOg + umask 022 + cd /usr/src/packages/BUILD + /bin/rm -rf /usr/src/packages/BUILDROOT/msktutil-0.4-43.1.x86_64 ++ dirname /usr/src/packages/BUILDROOT/msktutil-0.4-43.1.x86_64 + /bin/mkdir -p /usr/src/packages/BUILDROOT + /bin/mkdir /usr/src/packages/BUILDROOT/msktutil-0.4-43.1.x86_64 + cd msktutil-0.4 + CXXFLAGS=' -I/usr/include/et' + export CXXFLAGS + RPM_OPT_FLAGS='-fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -I/usr/include/et' + export RPM_OPT_FLAGS + CFLAGS='-fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' + export CFLAGS + CXXFLAGS=' -I/usr/include/et' + export CXXFLAGS + FFLAGS='-fmessage-length=0 -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' + export FFLAGS + ./configure --host=x86_64-unknown-linux-gnu --build=x86_64-unknown-linux-gnu --target=x86_64-suse-linux --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info checking for x86_64-unknown-linux-gnu-g++... no checking for x86_64-unknown-linux-gnu-c++... no checking for x86_64-unknown-linux-gnu-gpp... no checking for x86_64-unknown-linux-gnu-aCC... no checking for x86_64-unknown-linux-gnu-CC... no checking for x86_64-unknown-linux-gnu-cxx... no checking for x86_64-unknown-linux-gnu-cc++... no checking for x86_64-unknown-linux-gnu-cl.exe... no checking for x86_64-unknown-linux-gnu-FCC... no checking for x86_64-unknown-linux-gnu-KCC... no checking for x86_64-unknown-linux-gnu-RCC... no checking for x86_64-unknown-linux-gnu-xlC_r... no checking for x86_64-unknown-linux-gnu-xlC... no checking for g++... g++ checking for C++ compiler default output file name... a.out checking whether the C++ compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for install... /usr/bin/install checking for cat... /bin/cat checking for rm... /bin/rm checking for cp... /bin/cp checking for echo... /bin/echo checking for sed... /usr/bin/sed checking for mkdir... /bin/mkdir checking how to run the C++ preprocessor... g++ -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking krb5.h usability... yes checking krb5.h presence... yes checking for krb5.h... yes checking com_err.h usability... yes checking com_err.h presence... no configure: WARNING: com_err.h: accepted by the compiler, rejected by the preprocessor! configure: WARNING: com_err.h: proceeding with the compiler's result checking for com_err.h... yes checking heim_err.h usability... no checking heim_err.h presence... no checking for heim_err.h... no checking heimdal/heim_err.h usability... no checking heimdal/heim_err.h presence... no checking for heimdal/heim_err.h... no checking sasl.h usability... no checking sasl.h presence... no checking for sasl.h... no checking sasl/sasl.h usability... yes checking sasl/sasl.h presence... yes checking for sasl/sasl.h... yes checking for krb5_init_context in -lkrb5... yes checking for ldap_initialize in -lldap... yes checking whether com_err.h needs extern "C"... configure: error: Couldn't get error_message to work. error: Bad exit status from /var/tmp/rpm-tmp.eZpFOg (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.eZpFOg (%build) System halted. On Fri, Apr 16, 2010 at 1:52 PM, Marcus Meissner <meissner(a)suse.de> wrote: > On Fri, Apr 16, 2010 at 08:19:22AM -0700, Di Pe wrote: >> ran it again but still the same error, >> >> any other ideas? > > Can you add a > cat config.log > > after the configure and mail me the full log? > > Ciao, Marcus > -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 5

[opensuse-buildservice] Virtualizing OBS worker build environment with OpenVZ or LXC
by Ville.Seppanen＠tieto.com 13 Jun '11

13 Jun '11

Greetings, Is there any work being done for OpenVZ, LXC or other OS-level virtualization support for the build environment in OBS? I am doing my Master's thesis on extending OBS to the cloud. Seeing that Amazon Web Services uses Xen for virtualization (and thus does not support Xen/KVM inside it), and that building without a sandboxed environment is not safe, OpenVZ and LXC would seem promising. There's also much talk about using these technologies in AWS, so I would see it possible. Best Regards, Ville Seppänen Tieto Corporation -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

4 4

[opensuse-buildservice] getbinarylist and Transfer-Encoding header
by Marcus Hüwe 26 May '11

26 May '11

Hi, there seems to be a problem with the getbinarylist call (view=cpio) and the "Transfer-Encoding" header (depending on the "length" of the request?). I just tried the following curl calls: curl -o out.cpio -v -sS \ "https://api.opensuse.org/public/build/openSUSE:Factory/standard/x86_64/_rep… -e "print 'b'x3616")" and curl -o out.cpio -v -sS \ "https://api.opensuse.org/public/build/openSUSE:Factory/standard/x86_64/_rep… -e "print 'b'x3617")" The response of the first request still includes the "Transfer-Encoding" header but the response of the second request has no "Transfer-Encoding" header. Now consider the following call: curl http://<local obs>/build/<remote project>/<repo>/<arch>/_repository?view=cpio&<long query> This leads to a "crash" in bs_srcserver (the ajax process dies because the response has neither a "Transfer-Encoding" nor a "Content-Length" header). Any ideas why the "Transfer-Encoding" header gets swallowed? Marcus Ps. is this the same bug to which a comment in "worker_getbinaries" refers? -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 3

[opensuse-buildservice] OBS is using new login auth proxy
by Adrian Schröter 12 May '11

12 May '11

JFYI, we switched to a new login proxy mechanism today: http://news.opensuse.org/2011/04/19/infrastructure-updates/ please report if you see unexpected changes. Let's hope that eastern is safe ;) adrian -- Adrian Schroeter SUSE Linux Products GmbH email: adrian(a)suse.de -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

5 14

[opensuse-buildservice] Buil failor, cdbs ubuntu
by peer 10 May '11

10 May '11

Hi, The package cdbs keeps failing on me. I try to backport it from Debian and / or Ubuntu 10.10 to Ubuntu 10.04. Was always working, but now it fails or it fails for one architecture (something one sometimes the other arch...). https://build.opensuse.org/package/show?package=cdbs3&project=home%3Aopen-s… I need some help cause pretty some packages depends on a newer version of cdbs. Thanks in advance, ~P -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

9 41

[opensuse-buildservice] obsapidelayed is stopping occasionally
by Jeff_Glanz＠Dell.com 05 May '11

05 May '11

Greetings: The obsapidelayed (obswebuidelayed) process occasionally stops. We've implemented a 10 min scheduled cron script to keep it running. Are you aware of this issue? Is this process sensitive to occasional network disconnects? We are using OBS, version 2.1.6, release 6.2. We plan to upgrade to the latest incremental release this month. Is this expected behavior? I don't see anything in the logs. If not, is this fixed in a later release? Jeff Glanz Dell Inc. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 2

[opensuse-buildservice] OBS Mobile Version
by Ciro Iriarte 02 May '11

02 May '11

Just tried to access build.opensuse.org with my android phone and was presented with a cool mobile version of it, the thing is that authentication doesn't work, I don't receive any error message but I'm redirected to initial page where I'm invited to login... Am I missing something?. Regards, Ciro -- Ciro Iriarte http://cyruspy.wordpress.com -- -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

5 6

[opensuse-buildservice] How can I eradicate python3-3.2 from home:plater:blender
by Dave Plater 01 May '11

01 May '11

I'm trying to build blender-2.57b against python3-3.1 which is current. I had python3 linked from devel:languages:python which is python3-3.2, I now need to test with 3.1, I deleted the python3 and python3-base packages a few weeks ago but the build system still finds it somehow. Arbuthnot:/data/packages # find /var/tmp/osbuild-packagecache/ -name 'python3*' -delete -print /var/tmp/osbuild-packagecache/home:plater:blender/openSUSE_Factory/x86_64/python3-devel-3.2-12.1.x86_64.rpm /var/tmp/osbuild-packagecache/home:plater:blender/openSUSE_Factory/x86_64/python3-base-3.2-12.1.x86_64.rpm /var/tmp/osbuild-packagecache/home:plater:blender/openSUSE_Factory/x86_64/python3-3.2-17.1.x86_64.rpm /var/tmp/osbuild-packagecache/home:plater:blender/openSUSE_Factory/x86_64/python3-base-3.2-26.2.x86_64.rpm /var/tmp/osbuild-packagecache/home:plater:blender/openSUSE_Factory/x86_64/python3-devel-3.2-26.2.x86_64.rpm /var/tmp/osbuild-packagecache/home:plater:blender/openSUSE_Factory/x86_64/python3-3.2-26.1.x86_64.rpm /var/tmp/osbuild-packagecache/openSUSE.org:openSUSE:Factory/standard/x86_64/python3-3.1.3-5.1.x86_64.rpm /var/tmp/osbuild-packagecache/openSUSE.org:openSUSE:Factory/standard/x86_64/python3-devel-3.1.3-5.1.x86_64.rpm Arbuthnot:/data/packages # find /var/tmp/osbuild-packagecache/ -name 'python3*' -delete -print This is after osc build openSUSE_Factory has found it somewhere, it downloads "cpio" from the project. Arbuthnot:/data/packages # find /var/tmp/osbuild-packagecache/ -name 'python3*' /var/tmp/osbuild-packagecache/home:plater:blender/openSUSE_Factory/x86_64/python3-base-3.2-26.2.x86_64.rpm /var/tmp/osbuild-packagecache/home:plater:blender/openSUSE_Factory/x86_64/python3-devel-3.2-26.2.x86_64.rpm /var/tmp/osbuild-packagecache/home:plater:blender/openSUSE_Factory/x86_64/python3-3.2-26.1.x86_64.rpm How can I kill "cpio". Thanks Dave P -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 2

[opensuse-buildservice] expired certificate on https://bugzillafiles.novell.org at 04/30/11 01:17
by doiggl＠velocitynet.com.au 30 Apr '11

30 Apr '11

Hello I got a expired on the following --Glenn https://bugzillafiles.novell.org/attachment.cgi?id=427413 Message is: bugzillafiles.novell.org uses an invalid security certificate. The certificate expired on 04/30/11 01:17. (Error code: sec_error_expired_certificate) -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] missing build dependencies
by Praveen_Paladugu＠Dell.com 29 Apr '11

29 Apr '11

All, In our Private OBS (version 2.1.0), I created a Download on Demand project = (DoD_Prj) and am installing some of the packages in a VMDK appliance. The remote repository I am using is http://linux.dell.com/repo/hardware/OMS= A_6.4/platform_independent/suse11_64/. I am trying to install some of the p= ackages in the payloads directory. Some of these packages have dependencies= on packages like dell_ie_bmc in the ie_modules directory. Now the problem is, obs is able to pick up the packages from the payloads d= irectory. But it complains none of the repositories provides the packages = dell_ie_bmc although it is available in the repository. What could be going= wrong here? I have been trying to get to the exact function which computes the dependen= cies and verifies their existence in available repositories. If someone could point me to the file/function which handles these features= it would be of great help. Thank you Praveen K Paladugu Dell Linux Engineering -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

4 7

[opensuse-buildservice] 404 remote error: remote error Not Found
by Pascal Bleser 29 Apr '11

29 Apr '11

Our Packman OBS instance (at http://pmbs.links2linux.org) gets quite a number of mysterious build failures that only provide the following log message: 404 remote error: remote error Not Found That's it. No more, no less ;) It only happens with builds against openSUSE:11.4+openSUSE:11.4:Update, and not always either (some packages work, and the next fails). Can't find anything suspicious in the logs but I don't even know where to start looking, so I could only make some (almost) random greps. Of course, the log files not having log levels and not always timestamps, and being full of debug information everywhere doesn't help isolating problems :( Another weirdness is that when we trigger rebuilds on those failed builds, "nothing" happens. Well, some stuff happens in the logs (but as said, can't parse it, too much cruft), but nothing in the scheduler log -- hence the OBS doesn't even try to rebuild it in the first place. This is an OBS 2.1.7 instance running on openSUSE 11.4/x86_64. We're using the "public" HTTP (not HTTPS) connectivity for remoting to build.opensuse.org Needless to say that it's pretty critical, as there are many packages that we cannot provide to our very large user base for 11.4 :\ I'd be thankful for any hint or anything I could be looking for. I can also give ssh access to our OBS chroot to certain people. cheers -- -o) Pascal Bleser /\\ http://opensuse.org -- we haz green _\_v http://fosdem.org -- we haz conf

4 7

[opensuse-buildservice] Builds blocked in finished state
by Jeff_Glanz＠Dell.com 29 Apr '11

29 Apr '11

We have an OBS api (frontend) that cannot recalculate completion state (error or success). Completed builds are staying in the finished state. Any ideas as to what is happening? Thanks - JeffG -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 1

[opensuse-buildservice] new osc release 0.131
by Adrian Schröter 27 Apr '11

27 Apr '11

A new osc release is out. Beside the usual stack of bugfixes, this version comes with a larger number of functionality for our upcomming OBS 2.3 release. The request and especially the review handling of requests has been improved, what should help esp. people who work on openSUSE:Factory packages. Also a number of new commands for our upcomming maintenance features have been added. These will get explained in more details in our OBS book. This release is only available via openSUSE:Tools project for now, we will roll out an official update for all distributions during OBS 2.3 beta phase. http://download.opensuse.org/repositories/openSUSE:/Tools/ Detailed Release Notes: ======================= - new command 'develproject' to print the devel project from the package meta. - add blt and rblt commands, aka "buildlogtail" and "remotebuildlogtail" to show just the end of a build log (for getting the fail reason faster). CHANGE: the --start parameter is now called --offset - add "createrequest -a add_group" option to create a group request - add "createrequest -a add_me" shortcut - add "less" command, doing the same as "osc cat" but with pager - fallback to unexpanded diff mode on "osc diff" on merge error. - support viewing the commit history of deleted packages - show review states on "review list" - new source service commands "localrun" and "disabledrun" to generate files without _service: prefix - add "request supersede" and "review supersede" to supersede with existing request - make it possible to run single source services, even when not specified in _service file. (For example for doing a version update without creating a _service file: osc service lr update_source) - protect rebuild and abortbuild commands with required "--all" option to mass failures by accident (similar to wipebinaries) - "review accept/decline" is trying to change all reviews of a requests, if a specific one is not specified by user # # Features which requires OBS 2.3 # - "my requests" is doing faster and complete server side lookup now if available - "review" command has been extended to handle reviews by project or by package maintainers - support for new source service modes: disabled, trylocal and localonly - support project wide source services - support for armv7hl architecuture. used to denote armv7 + hardfloat binaries - add force option to accept requests in review state. - add "maintenancerequest" command to request a maintenance incident from maintenance team - add "releaserequest" command run a maintenance update release process (for maintenance team only) - allow to force the storage of project meta data (to ignore depending repositories for example) - "my requests" is showing requests with open reviews also now -- Adrian Schroeter SUSE Linux Products GmbH email: adrian(a)suse.de -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] Cannot login to obs - "user not registered with iChain"
by Daniel Z. 27 Apr '11

27 Apr '11

Hi all, I'm trying to login to OBS for the first time from the webui, but i get this error: OBS Web Interface Error: Unauthorized Access You need to log in to perform the operation. Please contact the openSUSE admin to get an account. Error Details: Errorcode: 401 Message: Your user is not yet registered with iChain I used the same account I use for the wiki. Have I to do something particular or is this an OBS bug? Any help would be appreciated. Thanks Daniel Z. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

5 9

[opensuse-buildservice] Building kernel on OBS
by Ciro Iriarte 26 Apr '11

26 Apr '11

Hi, I created packages from stock SLES11 src.rpm kernel packages but they won't build out of the box. kernel-source: Builds fine kernel-syms: Fails with ------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --define 'disturl obs://build.opensuse.org/home:ciriarte:ha/SLE_11_SP1/b337429349d28af850964c…' /usr/src/packages/SOURCES/kernel-syms.spec error: Unable to open /usr/src/packages/SOURCES/kernel-spec-macros: No such file or directory error: Name field must be present in package: (main package) error: Version field must be present in package: (main package) error: Release field must be present in package: (main package) error: Summary field must be present in package: (main package) error: Group field must be present in package: (main package) error: License field must be present in package: (main package) ------- kernel-xen: Fails with ------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --define 'disturl obs://build.opensuse.org/home:ciriarte:ha/SLE_11_SP1/8f408e830bec276a845d7d…' /usr/src/packages/SOURCES/kernel-xen.spec chmod: cannot access `/usr/src/packages/SOURCES/symsets.pl': No such file or directory tar: /usr/src/packages/SOURCES/config.tar.bz2: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: config/i386/xen: Not found in archive tar: Error exit delayed from previous errors error: File /usr/src/packages/SOURCES/linux-2.6.32.tar.bz2: No such file or directory ------- kernel-default: Fails with ---- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --define 'disturl obs://build.opensuse.org/home:ciriarte:ha/SLE_11_SP1/b7f8b86cc6fd54f2f32c59…' /usr/src/packages/SOURCES/kernel-default.spec chmod: cannot access `/usr/src/packages/SOURCES/symsets.pl': No such file or directory tar: /usr/src/packages/SOURCES/config.tar.bz2: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: config/i386/default: Not found in archive tar: Error exit delayed from previous errors error: File /usr/src/packages/SOURCES/linux-2.6.32.tar.bz2: No such file or directory ---- All the missing files seem to be included in kernel-source, tried to add it as a build requirement but build still fails. Is there any special requirement to build this packages? Regards, -- Ciro Iriarte http://cyruspy.wordpress.com -- -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 2

[opensuse-buildservice] OBS backup
by Johannes Lahti 26 Apr '11

26 Apr '11

Hi all! I'm currently trying to implement an automatic backup system for our OBS instance. I'm thinking about some kind of cron job that would sync all the needed data to a backup server. I'm just wondering, what do I have to copy in order to be able to fully restore the system? I don't want to backup the binaries that have been built using the OBS, they can be built again if something bad happens. I guess some folders under /srv/obs and a dump of the mysql -database, no? -Johannes -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 3

[opensuse-buildservice] o:F rpmlint broken
by Jan Engelhardt 26 Apr '11

26 Apr '11

On network:telephony:Factory/mISDNuser, one can observe that something is screwed up in openSUSE:Factory's rpmlint: (osc buildlog for mISDNuser:) RPMLINT report: =============== 2 packages and 0 specfiles checked; 0 errors, 1 warnings. Traceback (most recent call last): File "rpmlint.py", line 373, in <module> File "rpmlint.py", line 168, in main File "rpmlint.py", line 228, in runChecks File "BinariesCheck.py", line 359, in check printInfo(pkg, 'binary-or-shlib-calls-gethostbyname', fname) NameError: global name 'printInfo' is not defined -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] Constantly logged out of build.o.o
by R. Tyler Croy 21 Apr '11

21 Apr '11

I'm fully aware of the changes being made away from iChain as of late (no need to continue that discussion here), but I've been having trouble staying logged into build.opensuse.org for longer than an hour or two at a time. Is this related to the proxy move? Something perhaps buggy between OBS and my Chromium browser? - R. Tyler Croy -------------------------------------- Code: http://github.com/rtyler Chatter: http://identi.ca/agentdero http://twitter.com/agentdero

3 4

[opensuse-buildservice] OBS stuff at LinuxCon?
by Ann Davis 21 Apr '11

21 Apr '11

Hi, Just wondering if there will be an OBS presentation or marketing presence at LinuxCon North America in Vancouver Aug 17-19. Speaker proposals are due tomorrow. ;) Thanks, Ann -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] OBS cookies bug
by Cristian Rodríguez 21 Apr '11

21 Apr '11

Hi: The cookies that the OBS sends to browsers MUST have the "secure" flag [1] set, and possible the "HttpOnly" flag as well. [1]http://www.cgisecurity.com/owasp/html/ch07.html#id2857913 Cheers. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0