November 2009 - openSUSE Build Service

[opensuse-buildservice] Don t read, just a test
by Petit Eric 08 Nov '09

08 Nov '09

-- >Cordially. > > Small Eric Quotations of the days: > --------------------------------------------------------------------------- > I have no special talents. I am only passionately curious -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] Package deleted but binaries are still in repository
by Dave Plater 07 Nov '09

07 Nov '09

Hi, I deleted home:plater lilypond package and it got rid of the binaries in Factory but they are still present in the openSUSE_11.2 repository. Thanks Dave P -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 2

[opensuse-buildservice] build hosts back (and changes)
by Adrian Schröter 07 Nov '09

07 Nov '09

Hi, we had a bit trouble with dieing build hosts in the last 12 hours. This is solved now and all of them are building again. We have added build01 and build03 for a bit more build power. Another change is that some build hosts run now with "build ... -jobs 4 ..." parameter. This means, if your spec file is making use of %jobs macro behind the make command, it can make use of parallel build power. However, buggy Makefiles might run into errors now (usually missing dependency, so a compile or link failes, because another file was not there in time). have fun adrian -- Adrian Schroeter SUSE Linux Products GmbH email: adrian(a)suse.de -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] local obs server setup problems
by Doug Reiland 06 Nov '09

06 Nov '09

I have a new opensuse 11.1 installed system and trying to setup a local obs for the first time. I am using the instructions at http://en.opensuse.org/Build_Service/Build_Service_Installation_Tutorial/op… I have done thru the lighttpd configuration and started everything. I attempt to access http://127.0.42.1 and get: 500 - Internal Server Error Looking at /var/log/lighttpd/error.log, I see: 2009-11-04 06:16:37: (mod_fastcgi.c.1768) connect failed: Connection refused on unix:/srv/www/obs/webclient/tmp/sockets/fcgi.socket-4 2009-11-04 06:16:37: (mod_fastcgi.c.2956) backend died; we'll disable it for 5 seconds and send the request to another backend instead: reconnects: 0 load: 1 2009-11-04 06:16:38: (mod_fastcgi.c.2494) unexpected end-of-file (perhaps the fastcgi process died): pid: 17635 socket: unix:/srv/www/obs/webclient/tmp/sockets/fcgi.socket-4 2009-11-04 06:16:38: (mod_fastcgi.c.3278) child exited, pid: 17635 status: 1 2009-11-04 06:16:38: (mod_fastcgi.c.3325) response not received, request sent: 815 on socket: unix:/srv/www/obs/webclient/tmp/sockets/fcgi.socket-4 for /dispatch.fcgi , closing connection My log permissions are ok: ls -sld /srv/www/obs/*/log 4 drwxr-xr-x 2 lighttpd lighttpd 4096 2009-04-08 16:05 common/log 4 drwxr-xr-x 2 lighttpd lighttpd 4096 2009-11-04 05:17 frontend/log 4 drwxr-xr-x 2 lighttpd lighttpd 4096 2009-11-04 05:28 webclient/log ls -sla /srv/obs total 36 4 drwxr-xr-x 9 obsrun obsrun 4096 2009-11-01 23:00 . 4 drwxr-xr-x 5 root root 4096 2009-11-01 22:45 .. 4 drwxr-xr-x 5 obsrun obsrun 4096 2009-11-01 23:00 events 4 drwxr-xr-x 2 obsrun obsrun 4096 2009-11-01 23:00 info 4 drwxr-xr-x 4 obsrun obsrun 4096 2009-11-01 23:00 jobs 4 drwxr-xr-x 2 obsrun obsrun 4096 2009-11-04 06:17 log 4 drwxr-xr-x 2 obsrun obsrun 4096 2009-10-30 00:26 projects 4 drwxr-xr-x 2 obsrun obsrun 4096 2009-11-04 06:15 run 4 drwxr-xr-x 3 obsrun obsrun 4096 2009-11-01 23:00 workers Thoughts? -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

5 10

Re: [opensuse-buildservice] osc wipebinaries isn't wiping binaries
by Dave Plater 06 Nov '09

06 Nov '09

On 11/06/2009 02:04 PM, Petit Eric wrote: > wipe again ? > Several times including -a i586 switch as well. Regards Dave P -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] /monitor
by Stephan Kulow 06 Nov '09

06 Nov '09

Hi, Dominik and me added table sorting to the current trunk, so we can use it now on all pages where it makes sense. So I added it to the build job table on /monitor. You can sort by clicking on the table header and you can create subsorts by shift-clicking. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] osc wipebinaries isn't wiping binaries
by Dave Plater 06 Nov '09

06 Nov '09

Hi, lilypond in my home:plater repo failed to build for x86_64 so to prevent dependency problems I used osc wipebinaries home:plater lilypond -r openSUSE_11.2 and osc wipebinaries home:plater lilypond -r openSUSE_Factory and osc replied ok. Although there aren't any binaries in those repos visible in my home project page the binaries are still physically in the download.opensuse.org repo and are causing dependency problems. Am I doing something wrong? Thanks Dave P -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 3

[opensuse-buildservice] Hello List
by Stephan Kulow 05 Nov '09

05 Nov '09

Hello, I'm new to this list and I would like to introduce myself. My name is Stephan Kulow and I'm a web programmer living in Fürth. I think the build service is a great tool, but its web site could use some help, so I looked into the sources and improved it to my liking and would like to have your feedback. You can find my changes online under https://build.opensuse.org/stage What I tried: - do not include all existant javascript and css on all pages, but use :yield :content_for_head - make all pages I tried valid XHTML 1.0 Transitional (I'm sure there are more subpages with broken stuff) - do no longer call the API for package search in the project page, but let the browser filter - port all pages (mostly spinners) to jquery and remove prototype - add a refresh icon to the repositories table on the project list - add a little effect to the Watchlist popup I would like you to test some if I missed some javascript functionality that no longer works, so I can consider merging it into trunk. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 4

[opensuse-buildservice] Fwd: [package check 11.2-i586] boinc-gui-lang changes
by Sascha 'saigkill' Manns 05 Nov '09

05 Nov '09

Hello Mates, today i've recieved the packagecheck. Is that important for me? Must i do anything? ---------- Weitergeleitete Nachricht ---------- Subject: [package check 11.2-i586] boinc-gui-lang changes Date: Mittwoch 04 November 2009 From: root <root(a)suse.de> To: Mauro(a)novell.com Hi, Detected the following changes in provides list of boinc-gui-lang Distribution: 11.2-i586 +boinc-gui-lang = $VERSION-$RELEASE +boinc-gui-lang(x86-32) = $VERSION-$RELEASE Detected the following changes in requires list of boinc-gui-lang Distribution: 11.2-i586 +boinc-client = $VERSION-$RELEASE +boinc-gui = $VERSION-$RELEASE +rpmlib(CompressedFileNames) <= 3.0.4-1 +rpmlib(PayloadFilesHavePrefix) <= 4.0-1 +rpmlib(PayloadIsLzma) <= 4.4.6-1 PS: Note that all occurrences of %{VERSION}-%{RELEASE} are replaced by the verbatim string $VERSION-$RELEASE to minimize useless output. ------------------------------------------------------------- -- Sincerely yours Sascha Manns openSUSE Member openSUSE Ambassador openSUSE Marketing Team openSUSE Build Service Web: http://saschamanns.gulli.to Blog: http://saigkill.wordpress.com ClaimID: http://claimid.com/saigkill -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] Help creating packages with osc on command line
by Alexander Schunk 05 Nov '09

05 Nov '09

Hello, i have created a new package with my opensuse account and would like to build this with osc on the command line. Wat do i need to build package with osc? I have set up username and password for osc. thank you. Alexander -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] OBS and BuildRoot(uclibc)
by Matwey V. Kornilov 04 Nov '09

04 Nov '09

Hi, OBS can build rpms, debs and even Kiwi images, when kiwi config exists. OBS also can build with a number of different architectures. Are there any possibilities for integration buildroot(buildroot.uclibc.org) building into OBS? Basic ideology is the same: an user commits patches and configs to OBS and It makes embedded images with embedded busybox/linux for him. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] Fwd: [package check 11.2-i586] boinc-gui-lang changes
by Sascha 'saigkill' Manns 04 Nov '09

04 Nov '09

Hello Mates, today i've recieved the packagecheck. Is that important for me? Must i do anything? ---------- Weitergeleitete Nachricht ---------- Subject: [package check 11.2-i586] boinc-gui-lang changes Date: Mittwoch 04 November 2009 From: root <root(a)suse.de> To: Mauro(a)novell.com Hi, Detected the following changes in provides list of boinc-gui-lang Distribution: 11.2-i586 +boinc-gui-lang = $VERSION-$RELEASE +boinc-gui-lang(x86-32) = $VERSION-$RELEASE Detected the following changes in requires list of boinc-gui-lang Distribution: 11.2-i586 +boinc-client = $VERSION-$RELEASE +boinc-gui = $VERSION-$RELEASE +rpmlib(CompressedFileNames) <= 3.0.4-1 +rpmlib(PayloadFilesHavePrefix) <= 4.0-1 +rpmlib(PayloadIsLzma) <= 4.4.6-1 PS: Note that all occurrences of %{VERSION}-%{RELEASE} are replaced by the verbatim string $VERSION-$RELEASE to minimize useless output. ------------------------------------------------------------- -- Sincerely yours Sascha Manns openSUSE Member openSUSE Ambassador openSUSE Marketing Team openSUSE Build Service Web: http://saschamanns.gulli.to Blog: http://saigkill.wordpress.com ClaimID: http://claimid.com/saigkill -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] Weird double download for api pages
by Luke Imhoff 03 Nov '09

03 Nov '09

When I click on an api.opensuse.org link, say to download a tarball (https://api.opensuse.org/source/openSUSE:Tools/osc/debian.tar.gz), Firefox 3.5 (under Ubuntu 9.10) first says it's an HTML web page, which it prompts to open with Firefox again. When I open the html page, the normal tarball download then happens. Is this a bug in Firefox 3.5 or some change in the API? -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 2

[opensuse-buildservice] Build Team Meeting
by Adrian Schröter 03 Nov '09

03 Nov '09

present: cwh, mls, dmueller, jloeser, bg, adrian * Status Round * Maintenance proposal * Attribute API Status Round: ============= cwh: * Comparing parameter of mkisofs parameter from KIWIISOLinux with suse- isolinux. Small differences on some architectures, need investigations. * Testing Eclipse with kiwi perl, works nicely. * Our current Eclipse package is unusable broken, not even starting atm. mls: * Created new processes for the backend: - signing daemon, takes away the signing work from repserver - warden, sees broken build hosts and takes away build jobs from them * Support caching of packages from remote projects in bs_worker. jloeser: * Submit request can be processed in web client now. Showing diff, accept, decline or revoke. Already deployed on build.opensuse.org * Start to dig into attribute system for supporting it in webclient. adrian: * worked on attribute system, almost complete, deployed on api.opensuse.org * Wrote first draft of maintenance proposal. Maintenance proposal ==================== Initial draft has been published here: http://en.opensuse.org/Build_Service/Concepts/Maintenance osc maintained command shall be renamed to osc sm osc search [-m|--maintained] to fit better in the osc CLI and to avoid confusion with "osc maintainer" mls suggested to store patchinfo files in own package containers, so they can do an aggregate as one-shot at defined times. This needs followup discussions. Attribute API ============= Agreement to move attribute namespace and definition out of the project meta data. Last proposal, before we got aborted was /attribute/_meta # for name space definitions /attribute/$NAMESPACE/_meta # for attribute type definitions. -- Adrian Schroeter SUSE Linux Products GmbH email: adrian(a)suse.de -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] webclient issues
by Wolfgang Rosenauer 03 Nov '09

03 Nov '09

Hi, I see two issues with the webclient currently: - the links to the packages in OBS are pointing to api-internal.opensuse.org which is not accessible - I have most of my 'involved projects' twice in the list You probably want to have a look at that. Thanks, Wolfgang -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

5 8

[opensuse-buildservice] obs webclient updated
by Thomas Schmidt 02 Nov '09

02 Nov '09

Hi, we just updated the webclient with a patch from Jan Loeser that adds methods to accept, decline and view submit requests from the "My Projects" ( https://build.opensuse.org/project/list_my ) page. Greetings -- Thomas Schmidt (tom [at] opensuse.org) openSUSE Boosters Team "Don't Panic", Douglas Adams (1952 - 11.05.2001) -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

3 2

[opensuse-buildservice] New Build-Repo
by Sascha 'saigkill' Manns 02 Nov '09

02 Nov '09

Hello Mates, AFAIK we haven't written about that. But we have an openSUSE_11.2 BuildRepo. So we can add this in our home:$Name. Have a lot of fun... -- Sincerely yours Sascha Manns openSUSE Member openSUSE Ambassador openSUSE Marketing Team openSUSE Build Service Web: http://saschamanns.gulli.to Blog: http://saigkill.wordpress.com ClaimID: http://claimid.com/saigkill -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

6 6

[opensuse-buildservice] When is the correct time and method to move a directory to /opt
by doiggl＠velocitynet.com.au 02 Nov '09

02 Nov '09

When is the correct time and method to move a directory to /opt ? I want to move %{buildroot}/cricket-1.0.5 to /opt/cricket-1.0.5 >From the specfile ----------------- %prep %setup -q -n cricket-%version # added in 6 lines mkdir -p %{buildroot}/opt ls -laR %{buildroot}/opt ls -laR %{buildroot}/cricket-1.0.5 mv -v %{buildroot}/cricket-1.0.5 %{buildroot}/opt/cricket-1.0.5 ln -s %{buildroot}/cricket-1.0.5 %{buildroot}/opt/cricket ls -laR %{buildroot}/opt/cricket >From the logfile ---------------- + mkdir -p /usr/src/packages/BUILDROOT/test-1.0.5-9.1.i386/opt + ls -laR /usr/src/packages/BUILDROOT/test-1.0.5-9.1.i386/opt /usr/src/packages/BUILDROOT/test-1.0.5-9.1.i386/opt: total 8 drwxr-xr-x 2 abuild abuild 4096 Nov 2 06:30 . drwxr-xr-x 3 abuild abuild 4096 Nov 2 06:30 .. + ls -laR /usr/src/packages/BUILDROOT/test-1.0.5-9.1.i386/cricket-1.0.5 ls: cannot access /usr/src/packages/BUILDROOT/test-1.0.5-9.1.i386/cricket-1.0.5: No such file or directory error: Bad exit status from /var/tmp/rpm-tmp.rndSBi (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.rndSBi (%prep) System halted. full specfile detail -> https://build.opensuse.org/package/view_file?file=cricket105test.spec&packa… full logfile detail -> https://build.opensuse.org/package/view_file?file=cricket105test.spec&packa… Thanks for the info Glenn -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] Package graphics:blender Factory x86_64 has hung on finished
by Dave Plater 02 Nov '09

02 Nov '09

Hi, after a rebuild of graphics:blender all of the packages have succeeded except openSUSE_Factory x86_64 which has hung on finished. This could be a bug as I was doing a zypper dup at the same time on my x86_64 system and I had a problem with :- Digest verification failed for blender-doc-2.49b-12.1.noarch.rpm. Expected 1e09a08b451604fee50c56d57e038aac6cbc42d3, found 4b20733c3d6433b4f120a1cc0b968f8cff3a37fa. Continue? [yes/no] (no): y Which failed and I had to skip the package. The 12.1 build is the previous build, the succeded packages are all 13.1. Regards Dave P -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0