April 2008 - openSUSE Build Service - openSUSE Mailing Lists

[opensuse-buildservice] End Of Life: SUSE Linux 10.1 and Fedora 6
by Adrian Schröter 01 May '08

01 May '08

Hi, due to the fill rate of 80% on our storage, end of Life of the distributions and mirror admins complains about the size of our content, we will remove the following base distros and all repositories building against them: * SUSE Linux 10.1 * SUSE Linux 10.0 * Fedora Core & Extras 6 In case you want to mirror them for your own build service, this is your last chance :) bye adrian -- Adrian Schroeter SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) email: adrian(a)suse.de --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

9 30

[opensuse-buildservice] OSC rpmlint patch
by Marek Stopka (M4r3k) 30 Apr '08

30 Apr '08

Hi! I am attaching patch which should make osc able to handle new rpmlint support in /usr/bin/build. I am as well thinking about --lint parameter for osc build (osc build --lint ....) which will force installation of rpmlint-mini. What you think? Is it good idea? -- S pozdravem / Best regards Marek Stopka Official openSUSE community member Kontakty / Contacts Mobil/Cell phone: 774 59 79 40 E-mail: mstopka(a)opensuse.org WEB: www.m4r3k.org

2 1

[opensuse-buildservice] Building kmp on Factory i586
by Andrew Wafaa 30 Apr '08

30 Apr '08

Aloha all, I have been trying to build various kmp on Factory i586 for a while now (I think Alpha2 was when I started), and I have failed with various results. I have submitted 2 sacrificial lambs to the Build Service gods as of last night. Originally i was able to build the src.rpm but no usable rpm was produced. Now I can't even get that far: # osc build openSUSE_Factory i586 nvidia-gfxG01.spec Getting buildinfo from server buildinfo is broken... it says: expansion error: nothing provides kernel-source = 2.6.25-17 needed by kernel-syms # osc build openSUSE_Factory i586 r5u870.spec Getting buildinfo from server wrong repo/arch? Any help would be appreciated :) Once I have these drivers then I can use Factory on my Vaio. Thanks, Andy -- Andrew Wafaa, openSUSE Member: GNOME Team. awafaa(a)opensuse.org | http://opensuse.org/GNOME openSUSE: Get It, Discover It, Create It at http://www.opensuse.org http://www.wafaa.eu --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] Build serve noob, and need help with a rpm spec file
by Adam Jimerson 30 Apr '08

30 Apr '08

I am writing a text based fantasy RPG in perl and figured that having it on the build service would not hurt. I have already created the project, and tried for a couple of times to get it to build correctly but I was unable to get it correct. The url for my project is https://build.opensuse.org/package/show?package=Kenesis&project=home%3Avend… I have been reading the wiki on using the build service, but I can't find anything that helps me, I'm sure there is something helpfull 50+ link in but right now don't have the time the craw though every link I see. BTW: as the subject says I am new to the build service, been on opensuse(a)opensuse.org for a while.

8 16

[opensuse-buildservice] failed to build deb package.
by Ray Wang 30 Apr '08

30 Apr '08

Hi all, I uploaded my debian.control, debian,rules, debian,changelog, accerciser.dsc and source, and then trigger to build a deb package on OBS, BUT the pkg which generated only contain some Documentation files, no binary files. It's really weird. I tested on my Ubuntu 7.10 i386 desktop, but everything is fine. The package contain docs, libs, bins, man-pages, LC_MESSAGES etc. Why the deb package generated on OBS sucks? Is there any problem on OBS? My home project: https://build.opensuse.org/project/show?project=home%3Arawang My Ubuntu repo: http://download.opensuse.org/repositories/home:/rawang/xUbuntu_7.10 My package: https://build.opensuse.org/package/show?package=accerciser&project=home%3Ar… so you can see this package's size is only 13k, apparently, it doesn't contain the binary files. http://download.opensuse.org/repositories/home:/rawang/xUbuntu_7.10/i386/ac… Thanks in advance. Ray --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 2

[opensuse-buildservice] Adding Build-service function to Eclipse! Any suggestions?
by long hong 29 Apr '08

29 Apr '08

Hello, everyone! This summer I shall attend the Google Summer of Code, adding build service functions to eclipse. The bellow is my project: http://code.google.com/soc/2008/suse/appinfo.html?csaid=DFC9A170A95499CD Now I just want to gather users' expectations to this project. What would you like to see when using Build-Service in Eclipse? Thanks a lot! --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

14 31

[opensuse-buildservice] How to set display resolution during build of SLES 9 servers
by Greg Byrd 29 Apr '08

29 Apr '08

Hi Everyone, I'm using a SLES 9 build server and am trying to control the screen/display resolution when entering the two build stages. Initially when we boot to the SLES 9 cd, the display is set to 1280x1024 which is too high for some of our older monitors and KVMs, and when the server reboots to start the second stage (postbuild, etc), the resolution still defaults to 1280x1024. Can I control this setting? If yes, how? I don't see how to do this using the autoyast xml file. If there is a URL where I can learn how to do this, that would be wonderful! Thanks in advance, Greg ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

Re: [opensuse-buildservice] Adding Build-service function toEclipse! Any suggestions?
by Rodrigo Moya 28 Apr '08

28 Apr '08

On Mon, 2008-04-28 at 17:11 +0200, Marcus Hüwe wrote: > On 2008-04-28 16:48:31 +0200, Adrian Schröter wrote: > > On Monday 28 April 2008 16:40:57 wrote Rodrigo Moya: > > > On Wed, 2008-04-23 at 15:09 -0400, Michael Hutchinson wrote: > > > > Sorry for replying without context; I only joined the mailing list > > > > after the first few messages in this thread... > > > > > > > > I'm particularly interested in the planning of this project and the > > > > GNOME build service client, as I'm planning to implement similar > > > > functionality in MonoDevelop, the Mono (C# etc) IDE. Hence if we could > > > > share ideas, plans, designs and other information, that would be > > > > great. It's a shame all three of us are using different runtimes, as > > > > this means we can't share code directly :-/ > > > > > > yes, I think we should consider sharing the client implementation as > > > much as possible, so I see 2 solutions: > > > > > > * write a C library and create bindings from it > > > * write a D-Bus daemon that can be contacted via any D-Bus bindings > > > > > > for the GNOME client we were planning to use the OSC API, since we'll be > > > using pygtk, but since the Java and Mono clients are not able to use it > > > and so need to write their own client lib, I think we could use some of > > > the SoC student's time to work on this shared layer, couldn't we? > > > > Reading this, I wonder why we need a standard library for the api at all. > > > > Not that I am against it, but which functionality should go into it. I think > > most should be implemented on the api.o.o side. > > > > Pure http connect should be available in every development enviroment these > > days. > > > > Can you give some examples what kind of functionality makes sense to have in a > > common application library ? > > > A common library would make sense for things like working with project dirs and > package dirs etc. This should be done in a "unique" way e.g. it wouldn't make > sense if each client has its own subdir (osc -> .osc, client1 -> .client1...). > yes, good point, so you could switch from one client to the other or just share the downloaded packages > But I get the impression that only the gnome obs client would need this > functionality and the others "merely" do http requests. > why wouldn't they need, for instance, a place to store the downloaded packages sources? -- Rodrigo Moya <rodrigo(a)novell.com> --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] delete an user from the pkg project
by Petit Eric 26 Apr '08

26 Apr '08

hi In OBS web page of a package, how i can delete an user from the pkg project ? --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 2

[opensuse-buildservice] path / URL to repository on local build server
by Christopher Lang 26 Apr '08

26 Apr '08

Hi, on a local build server, what would be the correct URL to acccess a repository of built packages? For example, within a project, the link "Goto Repository" leads to: http://download.opensuse.org/repositories/myproject%3A/Factory/SUSE_Linux_1… Changing this to: http://127.0.42.1/repositories/myproject%3A/Factory/SUSE_Linux_10.1 does not work (would have been too simple, wouldn't it ;-) ). Is there a URL which allows acces to the local repositories as it does on the "big" public one? many thanks Chris obs-server-0.5-3.1 obs-worker-0.5-3.1 obs-api-0.5-3.1 http://www.acurana.de/ --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1