https://bugzilla.novell.com/show_bug.cgi?id=480050
User rd1381@yahoo.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=480050#c3
--- Comment #3 from Reza Davoudi 2009-03-13 10:27:19 MST ---
as my user after runnig stardict :
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27.19-3.2-default (geeko@buildhost) (gcc version 4.3.2
[gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2009-02-25 15:40:44
+0100
Command line: root=/dev/disk/by-id/ata-SAMSUNG_SP2504C_S09QJ1HL960974-part2
resume=/dev/disk/by-id/ata-SAMSUNG_SP2504C_S09QJ1HL960974-part1 splash=silent
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
BIOS-e820: 00000000cff70000 - 00000000cff7e000 (ACPI data)
BIOS-e820: 00000000cff7e000 - 00000000cffd0000 (ACPI NVS)
BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x130000 max_arch_pfn = 0x3ffffffff
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xcff70 max_arch_pfn = 0x3ffffffff
init_memory_mapping
0000000000 - 00cfe00000 page 2M
00cfe00000 - 00cff70000 page 4k
kernel direct mapping tables up to cff70000 @ 10000-16000
last_map_addr: cff70000 end: cff70000
init_memory_mapping
0100000000 - 0130000000 page 2M
kernel direct mapping tables up to 130000000 @ 14000-1a000
last_map_addr: 130000000 end: 130000000
RAMDISK: 37a63000 - 37fef109
ACPI: RSDP 000FB410, 0014 (r0 ACPIAM)
ACPI: RSDT CFF70000, 0040 (r1 A_M_I_ OEMRSDT 11000826 MSFT 97)
ACPI: FACP CFF70200, 0084 (r2 A_M_I_ OEMFACP 11000826 MSFT 97)
ACPI: DSDT CFF70440, 96DE (r1 A0993 A0993001 1 INTL 20060113)
ACPI: FACS CFF7E000, 0040
ACPI: APIC CFF70390, 006C (r1 A_M_I_ OEMAPIC 11000826 MSFT 97)
ACPI: MCFG CFF70400, 003C (r1 A_M_I_ OEMMCFG 11000826 MSFT 97)
ACPI: OEMB CFF7E040, 0089 (r1 A_M_I_ AMI_OEM 11000826 MSFT 97)
ACPI: HPET CFF79B20, 0038 (r1 A_M_I_ OEMHPET 11000826 MSFT 97)
ACPI: OSFR CFF79B60, 00B0 (r1 A_M_I_ OEMOSFR 11000826 MSFT 97)
ACPI: SSDT CFF7E5D0, 0A7C (r1 DpgPmm CpuPm 12 INTL 20060113)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000130000000
Bootmem setup node 0 0000000000000000-0000000130000000
NODE_DATA [0000000000015000 - 000000000002cfff]
bootmap [000000000002d000 - 0000000000052fff] pages 26
(7 early reservations) ==> bootmem [0000000000 - 0130000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 0000bc98b8] TEXT DATA BSS ==> [0000200000 - 0000bc98b8]
#3 [0037a63000 - 0037fef109] RAMDISK ==> [0037a63000 - 0037fef109]
#4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
#5 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
#6 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000]
found SMP MP-table at [ffff8800000ff780] 000ff780
[ffffe20000000000-ffffe20004bfffff] PMD -> [ffff880028200000-ffff88002c1fffff]
on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x000cff70
0: 0x00100000 -> 0x00130000
On node 0 totalpages: 1048317
DMA zone: 1304 pages, LIFO batch:0
DMA32 zone: 831408 pages, LIFO batch:31
Normal zone: 193536 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a301 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 00000000cff70000 - 00000000cff7e000
PM: Registered nosave memory: 00000000cff7e000 - 00000000cffd0000
PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000)
PERCPU: Allocating 61344 bytes of per cpu data
NR_CPUS: 512, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1026248
Policy zone: Normal
Kernel command line:
root=/dev/disk/by-id/ata-SAMSUNG_SP2504C_S09QJ1HL960974-part2
resume=/dev/disk/by-id/ata-SAMSUNG_SP2504C_S09QJ1HL960974-part1 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PMTIMER calibration value
Detected 2999.655 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x20000000 - 0x24000000
Memory: 4045280k/4980736k available (2699k kernel code, 147988k reserved, 3164k
data, 788k init)
CPA: page pool initialized 1 of 1 pages preallocated
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency..
5999.31 BogoMIPS (lpj=11998620)
kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights
Reserved
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20080609
ACPI: Checking initramfs for custom DSDT
Parsing all Control Methods:
Table [DSDT](id 0001) - 996 Objects with 66 Devices 288 Methods 31 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 50 Objects with 0 Devices 8 Methods 1 Regions
tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
Setting APIC routing to flat
.TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a
Using local APIC timer interrupts.
APIC timer calibration result 20830982
Detected 20.830 MHz APIC timer.
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5592.09 BogoMIPS
(lpj=11184193)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (11591.40 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-1 level NODE
groups: 0-1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-1 level NODE
groups: 0-1
net_namespace: 1936 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
perfmon: version 2.82
perfmon: CPU hotplug support enabled
evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 3F [_GPE] 8 regs on int
0x9
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package
initialization:.......................................................................................................................................................................................................................................................
Initialized 26/32 Regions 54/54 Fields 60/60 Buffers 107/108 Packages (1055
nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.
Executed 1 _INI methods requiring 1 _STA executions (examined 72 objects)
evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 12 Wake, Enabled 3 Runtime
GPEs in this block
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
PCI: 0000:00:1a.0 reg 20 io port: [b800, b81f]
PCI: 0000:00:1a.1 reg 20 io port: [b880, b89f]
PCI: 0000:00:1a.2 reg 20 io port: [bc00, bc1f]
PCI: 0000:00:1a.7 reg 10 32bit mmio: [f9fffc00, f9ffffff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
PCI: 0000:00:1b.0 reg 10 64bit mmio: [f9ff8000, f9ffbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [b080, b09f]
PCI: 0000:00:1d.1 reg 20 io port: [b400, b41f]
PCI: 0000:00:1d.2 reg 20 io port: [b480, b49f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [f9fff800, f9fffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
PCI: 0000:00:1f.2 reg 10 io port: [a000, a007]
PCI: 0000:00:1f.2 reg 14 io port: [9c00, 9c03]
PCI: 0000:00:1f.2 reg 18 io port: [9880, 9887]
PCI: 0000:00:1f.2 reg 1c io port: [9800, 9803]
PCI: 0000:00:1f.2 reg 20 io port: [9480, 948f]
PCI: 0000:00:1f.2 reg 24 io port: [9400, 940f]
PCI: 0000:00:1f.3 reg 10 64bit mmio: [f9fff400, f9fff4ff]
PCI: 0000:00:1f.3 reg 20 io port: [400, 41f]
PCI: 0000:00:1f.5 reg 10 io port: [b000, b007]
PCI: 0000:00:1f.5 reg 14 io port: [ac00, ac03]
PCI: 0000:00:1f.5 reg 18 io port: [a880, a887]
PCI: 0000:00:1f.5 reg 1c io port: [a800, a803]
PCI: 0000:00:1f.5 reg 20 io port: [a480, a48f]
PCI: 0000:00:1f.5 reg 24 io port: [a400, a40f]
PCI: 0000:01:00.0 reg 10 32bit mmio: [fd000000, fdffffff]
PCI: 0000:01:00.0 reg 14 64bit mmio: [d0000000, dfffffff]
PCI: 0000:01:00.0 reg 1c 64bit mmio: [fa000000, fbffffff]
PCI: 0000:01:00.0 reg 24 io port: [cc00, cc7f]
PCI: 0000:01:00.0 reg 30 32bit mmio: [fe8e0000, fe8fffff]
PCI: bridge 0000:00:01.0 io port: [c000, cfff]
PCI: bridge 0000:00:01.0 32bit mmio: [fa000000, fe8fffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff]
PCI: bridge 0000:00:1c.0 64bit mmio pref: [f8f00000, f8ffffff]
PCI: 0000:03:00.0 reg 10 io port: [ec00, ec07]
PCI: 0000:03:00.0 reg 14 io port: [e880, e883]
PCI: 0000:03:00.0 reg 18 io port: [e800, e807]
PCI: 0000:03:00.0 reg 1c io port: [e480, e483]
PCI: 0000:03:00.0 reg 20 io port: [e400, e40f]
PCI: 0000:03:00.0 reg 24 32bit mmio: [feaffc00, feafffff]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:03:00.0: PME# disabled
Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.4. It can be enabled
forcedly with 'pcie_aspm=force'
PCI: bridge 0000:00:1c.4 io port: [e000, efff]
PCI: bridge 0000:00:1c.4 32bit mmio: [fea00000, feafffff]
PCI: 0000:02:00.0 reg 10 64bit mmio: [fe9c0000, fe9fffff]
PCI: 0000:02:00.0 reg 18 io port: [dc00, dc7f]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.5. It can be enabled
forcedly with 'pcie_aspm=force'
PCI: bridge 0000:00:1c.5 io port: [d000, dfff]
PCI: bridge 0000:00:1c.5 32bit mmio: [fe900000, fe9fffff]
PCI: 0000:05:03.0 reg 10 32bit mmio: [febff000, febfffff]
pci 0000:05:03.0: supports D1
pci 0000:05:03.0: supports D2
pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:05:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 32bit mmio: [feb00000, febfffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - B7, should be
B6 [20080609]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 64-bit timers, 14318180 Hz
AppArmor: AppArmor Filesystem Enabled
ACPI: RTC can wake from S4
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:06: ioport range 0x290-0x29f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x500-0x57f has been reserved
system 00:07: iomem range 0xfed08000-0xfed08fff has been reserved
system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
system 00:0a: iomem range 0xffc00000-0xffefffff has been reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0f: iomem range 0x0-0x9ffff could not be reserved
system 00:0f: iomem range 0xc0000-0xcffff has been reserved
system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
system 00:0f: iomem range 0x100000-0xcfffffff could not be reserved
system 00:0f: iomem range 0xe0000000-0xffffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xc000-0xcfff
pci 0000:00:01.0: MEM window: 0xfa000000-0xfe8fffff
pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.4: IO window: 0xe000-0xefff
pci 0000:00:1c.4: MEM window: 0xfea00000-0xfeafffff
pci 0000:00:1c.4: PREFETCH window: disabled
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.5: IO window: 0xd000-0xdfff
pci 0000:00:1c.5: MEM window: 0xfe900000-0xfe9fffff
pci 0000:00:1c.5: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [c000, cfff]
bus: 01 index 1 mmio: [fa000000, fe8fffff]
bus: 01 index 2 mmio: [d0000000, dfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 04 index 0 mmio: [0, 0]
bus: 04 index 1 mmio: [0, 0]
bus: 04 index 2 mmio: [f8f00000, f8ffffff]
bus: 04 index 3 mmio: [0, 0]
bus: 03 index 0 io port: [e000, efff]
bus: 03 index 1 mmio: [fea00000, feafffff]
bus: 03 index 2 mmio: [0, 0]
bus: 03 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [d000, dfff]
bus: 02 index 1 mmio: [fe900000, fe9fffff]
bus: 02 index 2 mmio: [0, 0]
bus: 02 index 3 mmio: [0, 0]
bus: 05 index 0 mmio: [0, 0]
bus: 05 index 1 mmio: [feb00000, febfffff]
bus: 05 index 2 mmio: [0, 0]
bus: 05 index 3 io port: [0, ffff]
bus: 05 index 4 mmio: [0, ffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...<7>Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
done
Freeing initrd memory: 5680k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1236963552.588:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 1978
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
perfmon: added sampling format default
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.4: found MSI capability
pci_express 0000:00:1c.4:pcie00: allocate port service
pci_express 0000:00:1c.4:pcie02: allocate port service
pci_express 0000:00:1c.4:pcie03: allocate port service
pcieport-driver 0000:00:1c.5: setting latency timer to 64
pcieport-driver 0000:00:1c.5: found MSI capability
pci_express 0000:00:1c.5:pcie00: allocate port service
pci_express 0000:00:1c.5:pcie02: allocate port service
pci_express 0000:00:1c.5:pcie03: allocate port service
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver8 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot
with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
TCP cubic registered
registered taskstats version 1
Freeing unused kernel memory: 788k freed
Write protecting the kernel read-only data: 4932k
ACPI: No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:03:00.0: version 3.0
ACPI: SSDT CFF7E0D0, 0277 (r1 DpgPmm P001Ist 11 INTL 20060113)
Parsing all Control Methods:
Table [SSDT](id 0016) - 6 Objects with 0 Devices 4 Methods 0 Regions
processor ACPI_CPU:00: registered as cooling_device0
ACPI: SSDT CFF7E350, 0277 (r1 DpgPmm P002Ist 12 INTL 20060113)
Parsing all Control Methods:
Table [SSDT](id 0019) - 6 Objects with 0 Devices 4 Methods 0 Regions
processor ACPI_CPU:01: registered as cooling_device1
vendor=8086 device=3a48
pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_marvell 0000:03:00.0: setting latency timer to 64
scsi0 : pata_marvell
scsi1 : pata_marvell
ata1: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
ata2: PATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 16
ata1.00: ATAPI: PIONEER DVD-RW DVR-111D, 1.29, max UDMA/66
ata1.00: configured for UDMA/66
scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-111D 1.29 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
ata3.00: SATA link down (SStatus 0 SControl 300)
ata3.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.01: ATA-8: MAXTOR STM3500320AS, MX15, max UDMA/133
ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.01: configured for UDMA/133
ata4.00: SATA link down (SStatus 0 SControl 300)
ata4.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.01: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7
ata4.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.01: configured for UDMA/133
scsi 2:0:1:0: Direct-Access ATA MAXTOR STM350032 MX15 PQ: 0 ANSI: 5
scsi 3:0:1:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
ata6: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Uniform Multi-Platform E-IDE driver
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
udevd version 128 started
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not
after
sd 2:0:1:0: [sda] 976773168 512-byte hardware sectors: (500GB/465GiB)
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 2:0:1:0: [sda] 976773168 512-byte hardware sectors: (500GB/465GiB)
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda: sda1 sda2 < sda5 >
sd 2:0:1:0: [sda] Attached SCSI disk
sd 3:0:1:0: [sdb] 488397168 512-byte hardware sectors: (250GB/232GiB)
sd 3:0:1:0: [sdb] Write Protect is off
sd 3:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 3:0:1:0: [sdb] 488397168 512-byte hardware sectors: (250GB/232GiB)
sd 3:0:1:0: [sdb] Write Protect is off
sd 3:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4
sd 3:0:1:0: [sdb] Attached SCSI disk
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.19-3.2-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.19-3.2-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.1
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27.19-3.2-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.2
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
usb 2-2: new full speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
hub 2-0:1.0: unable to enumerate USB device on port 2
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27.19-3.2-default ehci_hcd
usb usb4: SerialNumber: 0000:00:1a.7
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 4-4: new high speed USB device using ehci_hcd and address 2
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27.19-3.2-default uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 4-4: configuration #1 chosen from 2 choices
usb 4-4: New USB device found, idVendor=05ac, idProduct=1209
usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-4: Product: iPod
usb 4-4: Manufacturer: Apple
usb 4-4: SerialNumber: 000A270015308BBA
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.27.19-3.2-default uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 5-2: new low speed USB device using uhci_hcd and address 2
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.27.19-3.2-default uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: EHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.27.19-3.2-default ehci_hcd
usb usb8: SerialNumber: 0000:00:1d.7
PM: Starting manual resume from disk
usb 5-2: device not accepting address 2, error -71
hub 5-0:1.0: unable to enumerate USB device on port 2
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 5-2: new low speed USB device using uhci_hcd and address 4
usb 5-2: configuration #1 chosen from 1 choice
usb 5-2: New USB device found, idVendor=09da, idProduct=000a
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: PS/2+USB Mouse
usb 5-2: Manufacturer: A4Tech
udevd version 128 started
scsi 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:1:0: Attached scsi generic sg1 type 0
sd 3:0:1:0: Attached scsi generic sg2 type 0
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button (CM) [PWRB]
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG
[0x400-0x40f]
ACPI: Device needs an ACPI driver
input: PC Speaker as /devices/platform/pcspkr/input/input3
vendor=8086 device=3a4a
ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ATL1E 0000:02:00.0: setting latency timer to 64
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
loaded kvm module (kvm-78-6.6.6)
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver hiddev
vendor=8086 device=244e
ohci1394 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
input: A4Tech PS/2+USB Mouse as
/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input4
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[febff000-febff7ff]
Max Packet=[2048] IR/IT contexts=[8/8]
input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on
usb-0000:00:1d.0-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nvidia: module license 'NVIDIA' taints kernel.
vendor=8086 device=2e21
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.29 Wed Feb 4 23:39:47 PST
2009
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, hpet irqs
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3136: autoconfig: line_outs=4
(0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:3140: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3144: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3145: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3153: inputs: mic=0x18, fmic=0x19, line=0x1a,
fline=0x0, cd=0x0, aux=0x0
scsi 6:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0
sd 6:0:0:0: [sdc] 14651280 2048-byte hardware sectors: (30.0GB/27.9GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 68 00 00 08
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] 14651280 2048-byte hardware sectors: (30.0GB/27.9GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 68 00 00 08
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1 sdc2
sd 6:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c000170670a]
Adding 2104472k swap on /dev/sdb1. Priority:-1 extents:1 across:2104472k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel@redhat.com
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
type=1505 audit(1236950966.486:2): operation="profile_load" name="/bin/ping"
name2="default" pid=1827
type=1505 audit(1236950966.506:3): operation="profile_load" name="/sbin/klogd"
name2="default" pid=1828
type=1505 audit(1236950966.542:4): operation="profile_load"
name="/sbin/syslog-ng" name2="default" pid=1829
type=1505 audit(1236950966.578:5): operation="profile_load"
name="/sbin/syslogd" name2="default" pid=1830
type=1505 audit(1236950966.618:6): operation="profile_load"
name="/usr/sbin/avahi-daemon" name2="default" pid=1831
type=1505 audit(1236950966.654:7): operation="profile_load"
name="/usr/sbin/identd" name2="default" pid=1848
type=1505 audit(1236950966.706:8): operation="profile_load"
name="/usr/sbin/mdnsd" name2="default" pid=1849
type=1505 audit(1236950966.770:9): operation="profile_load"
name="/usr/sbin/nscd" name2="default" pid=1851
type=1505 audit(1236950966.870:10): operation="profile_load"
name="/usr/sbin/ntpd" name2="default" pid=1862
type=1505 audit(1236950966.914:11): operation="profile_load"
name="/usr/sbin/traceroute" name2="default" pid=1882
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ADDRCONF(NETDEV_UP): eth0: link is not ready
ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NET: Registered protocol family 17
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 2 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa0bd78e0
vboxdrv: fAsync=0 offMin=0x22e offMax=0x1287
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009).
VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0d72960
eth0: no IPv6 routers present
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251
LEN=490 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=470
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251
LEN=260 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=240
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251
LEN=490 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=470
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251
LEN=490 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=470
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251
LEN=454 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=434
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251
LEN=454 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=434
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251
LEN=414 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=394
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251
LEN=454 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=434
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-1 level NODE
groups: 0-1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-1 level NODE
groups: 0-1
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.100 DST=92.122.209.8 LEN=52 TOS=0x00
,PREC=0x00 TTL=64 ID=21298 DF PROTO=TCP SPT=33926 DPT=80 WINDOW=69 RES=0x00 ACK
FIN URGP=0 OPT (0101080A00004E83E176CA84)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.100 DST=92.122.209.8 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=21299 DF PROTO=TCP SPT=33926 DPT=80 WINDOW=69 RES=0x00 ACK
FIN URGP=0 OPT (0101080A00006A9FE176CA84)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.100 DST=92.122.209.8 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=21300 DF PROTO=TCP SPT=33926 DPT=80 WINDOW=69 RES=0x00 ACK
FIN URGP=0 OPT (0101080A0000A2D7E176CA84)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.100 DST=91.194.91.142 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=1042 DF PROTO=TCP SPT=46438 DPT=80 WINDOW=69 RES=0x00 ACK
FIN URGP=0 OPT (0101080A0000AA427E5CC797)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.100 DST=91.194.91.142 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=1043 DF PROTO=TCP SPT=46438 DPT=80 WINDOW=69 RES=0x00 ACK
FIN URGP=0 OPT (0101080A000112C27E5CC797)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.100 DST=92.122.209.8 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=21301 DF PROTO=TCP SPT=33926 DPT=80 WINDOW=69 RES=0x00 ACK
FIN URGP=0 OPT (0101080A00011347E176CA84)
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=00:22:15:8d:9f:31:00:04:ed:6f:df:bc:08:00 SRC=192.168.1.254
DST=192.168.1.100 LEN=63 TOS=0x00 PREC=0x00 TTL=255 ID=2190 DF PROTO=UDP SPT=53
DPT=43785 LEN=43
npviewer.bin[6728]: segfault at b5472030 ip 00000000b77b1560 sp
00000000bfe3de30 error 4 in libpthread-2.9.so[b77aa000+16000]
SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC=00:22:15:8d:9f:31:00:04:ed:6f:df:bc:08:00 SRC=192.168.1.254
DST=192.168.1.100 LEN=338 TOS=0x00 PREC=0x00 TTL=255 ID=3267 PROTO=UDP SPT=1900
DPT=37398 LEN=318
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.