[Bug 387580] New: update authentication does not accept root password, thus fails
https://bugzilla.novell.com/show_bug.cgi?id=387580 User dmartinjr@triad.rr.com added comment https://bugzilla.novell.com/show_bug.cgi?id=387580#c1 Summary: update authentication does not accept root password, thus fails Product: openSUSE 11.0 Version: Beta 2 Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: dmartinjr@triad.rr.com QAContact: jsrain@novell.com Found By: Beta-Customer After clicking the update icon and then clicking "update system now" a box appears asking for "password for root". The entered password is not accepted. Then I attempt to update via YAST-> Software management. Self aborts with no messages. dmesg Linux version 2.6.25-26-default (geeko@buildhost) (gcc version 4.3.1 20080425 (prerelease) [gcc-4_3-branch revision 134659] (SUSE Linux) ) #1 SMP 2008-04-30 07:56:05 +0200 Command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD1600AAJS-_WD-WCAP93886244-part2 resume=/dev/sda3 splash=silent vga=0x31a BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 524000) 1 entries of 3200 used end_pfn_map = 1048576 DMI 2.4 present. ACPI: RSDP 000F7C20, 0024 (r2 Nvidia) ACPI: XSDT 7FEE3100, 0044 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: FACP 7FEEC5C0, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: DSDT 7FEE3280, 92C4 (r1 NVIDIA AWRDACPI 1000 MSFT 3000000) ACPI: FACS 7FEE0000, 0040 ACPI: SSDT 7FEEC7C0, 02CC (r1 PTLTD POWERNOW 1 LTP 1) ACPI: MCFG 7FEECB80, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: APIC 7FEEC700, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000007fee0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 524000) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-000000007fee0000 NODE_DATA [000000000000c000 - 0000000000013fff] bootmap [0000000000014000 - 0000000000023fdf] pages 10 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] SMP_TRAMPOLINE early res: 2 [200000-8b6bd7] TEXT DATA BSS early res: 3 [37b56000-37fef260] RAMDISK early res: 4 [9f000-9ffff] EBDA early res: 5 [8000-bfff] PGTABLE [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 524000 On node 0 totalpages: 523903 DMA zone: 56 pages used for memmap DMA zone: 1728 pages reserved DMA zone: 2215 pages, LIFO batch:0 DMA32 zone: 7108 pages used for memmap DMA32 zone: 512796 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 50608 bytes of per cpu data Built 1 zonelists in Node order, mobility grouping on. Total pages: 515011 Policy zone: DMA32 Kernel command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD1600AAJS-_WD-WCAP93886244-part2 resume=/dev/sda3 splash=silent vga=0x31a bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2812.962 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour dummy device 80x25 console [tty0] enabled Checking aperture... Node 0: aperture @ 8a12000000 size 32 MB Aperture beyond 4GB. Ignoring. No AGP bridge found Memory: 2055012k/2096000k available (2368k kernel code, 40600k reserved, 1918k data, 404k init) CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay using timer specific routine.. 5630.56 BogoMIPS (lpj=11261132) Security Framework initialized AppArmor: AppArmor initialized <NULL> AppArmor: Registered secondary security module capability Capability LSM initialized as secondary Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 1483 Objects with 113 Devices 380 Methods 48 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful Using local APIC timer interrupts. APIC timer calibration result 12557867 Detected 12.557 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 5625.99 BogoMIPS (lpj=11251987) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03 Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 00000000,00000000,00000000,00000003 groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 domain 1: span 00000000,00000000,00000000,00000003 groups: 00000000,00000000,00000000,00000003 CPU1 attaching sched-domain: domain 0: span 00000000,00000000,00000000,00000003 groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 domain 1: span 00000000,00000000,00000000,00000003 groups: 00000000,00000000,00000000,00000003 net_namespace: 1016 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at f0000000 - f3ffffff PCI: Using configuration type 1 evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-0956 [00] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8 regs on int 0x9 evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 0 Runtime GPEs in this block evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 1 Runtime GPEs in this block ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:.............................................................................................................................................................................. Initialized 43/48 Regions 11/11 Fields 40/40 Buffers 80/104 Packages (1500 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:... Executed 3 _INI methods requiring 1 _STA executions (examined 118 objects) ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:06.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK6] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report AppArmor: AppArmor Filesystem Enabled ACPI: RTC can wake from S4 system 00:01: ioport range 0x1000-0x107f has been reserved system 00:01: ioport range 0x1080-0x10ff has been reserved system 00:01: ioport range 0x1400-0x147f has been reserved system 00:01: ioport range 0x1480-0x14ff has been reserved system 00:01: ioport range 0x1800-0x187f has been reserved system 00:01: ioport range 0x1880-0x18ff has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x800-0x87f has been reserved system 00:02: ioport range 0x290-0x297 has been reserved system 00:0a: iomem range 0xf0000000-0xf3ffffff could not be reserved system 00:0b: iomem range 0xcc800-0xcffff has been reserved system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved system 00:0b: iomem range 0xfc000-0xfffff could not be reserved system 00:0b: iomem range 0xfefff000-0xfefff0ff has been reserved system 00:0b: iomem range 0x7fee0000-0x7fefffff could not be reserved system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved system 00:0b: iomem range 0x0-0x9ffff could not be reserved system 00:0b: iomem range 0x100000-0x7fedffff could not be reserved system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:0b: iomem range 0xfefff000-0xfeffffff could not be reserved system 00:0b: iomem range 0xfff80000-0xfff80fff has been reserved system 00:0b: iomem range 0xfff90000-0xfffbffff has been reserved system 00:0b: iomem range 0xfffed000-0xfffeffff has been reserved PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: 0xfde00000-0xfdefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: 8000-9fff MEM window: 0xfdd00000-0xfddfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0f.0 IO window: 7000-7fff MEM window: 0xf8000000-0xfbffffff PREFETCH window: 0x00000000e0000000-0x00000000efffffff PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Setting latency timer of device 0000:00:0f.0 to 64 NET: Registered protocol family 2 Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Unpacking initramfs... done Freeing initrd memory: 4708k freed audit: initializing netlink socket (disabled) type=2000 audit(1210144452.512:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:05.0: Enabling HT MSI Mapping pci 0000:00:05.1: Enabling HT MSI Mapping pci 0000:00:05.2: Enabling HT MSI Mapping pci 0000:00:06.0: Enabling HT MSI Mapping pci 0000:00:06.1: Enabling HT MSI Mapping pci 0000:00:08.0: Enabling HT MSI Mapping pci 0000:00:09.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:0f.0: Enabling HT MSI Mapping pci 0000:03:00.0: Boot video device PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Allocate Port Service[0000:00:0e.0:pcie03] PCI: Setting latency timer of device 0000:00:0f.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0f.0:pcie00] Allocate Port Service[0000:00:0f.0:pcie03] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc20004980000, using 10240k, total 14336k vesafb: mode is 1280x1024x16, linelength=2560, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture... bootsplash: silentjpeg size 98233 bytes bootsplash: ...found (1280x1024, 35219 bytes, v3). Console: switching to colour frame buffer device 156x60 fb0: VESA VGA frame buffer device Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 input: PC Speaker as /devices/platform/pcspkr/input/input1 cpuidle: using governor ladder cpuidle: using governor menu NET: Registered protocol family 1 registered taskstats version 1 Freeing unused kernel memory: 404k freed Write protecting the kernel read-only data: 1680k ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [THRM] (40 C) No dock devices found. SCSI subsystem initialized libata version 3.00 loaded. sata_nv 0000:00:05.0: version 3.5 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:05.0 to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: WDC WD1600AAJS-75PSA0, 05.06H05, max UDMA/133 ata1.00: 312500000 sectors, multi 1: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-7: WDC WD1600AAJS-98PSA0, 05.06H05, max UDMA/133 ata2.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD1600AAJS-7 05.0 PQ: 0 ANSI: 5 scsi 1:0:0:0: Direct-Access ATA WDC WD1600AAJS-9 05.0 PQ: 0 ANSI: 5 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:05.1 to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 22 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 22 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: Optiarc DVD RW AD-7170S, 1.00, max UDMA/66 ata3.00: configured for UDMA/66 ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATAPI: Optiarc DVD RW AD-7170S, 1.00, max UDMA/66 ata4.00: configured for UDMA/66 scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7170S 1.00 PQ: 0 ANSI: 5 scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7170S 1.00 PQ: 0 ANSI: 5 ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:05.2 to 64 scsi4 : sata_nv scsi5 : sata_nv ata5: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 21 ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 21 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) pata_amd 0000:00:04.0: version 0.3.10 PCI: Setting latency timer of device 0000:00:04.0 to 64 scsi6 : pata_amd scsi7 : pata_amd ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 ata8: port disabled. ignoring. ACPI: PNP0C0B:00 is registered as cooling_device2 ACPI: Fan [FAN] (on) BIOS EDD facility v0.16 2004-Jun-25, 6 devices found usbcore: registered new interface driver usbfs Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 <<6>usbcore: registered new interface driver hub usbcore: registered new device driver usb ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000 sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb:<6>usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected sdb1 sdb2 sdb3 sd 1:0:0:0: [sdb] Attached SCSI disk usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.25-26-default ohci_hcd usb usb1: SerialNumber: 0000:00:02.0 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.25-26-default ehci_hcd usb usb2: SerialNumber: 0000:00:02.1 PM: Starting manual resume from disk usb 2-2: new high speed USB device using ehci_hcd and address 2 kjournald starting. Commit interval 5 seconds EXT3 FS on sdb2, internal journal EXT3-fs: mounted filesystem with ordered data mode. usb 2-2: configuration #1 chosen from 1 choice usb 2-2: New USB device found, idVendor=03f0, idProduct=8904 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-2: Product: Deskjet 6940 series usb 2-2: Manufacturer: HP usb 2-2: SerialNumber: MY7ANBS3FB04Q9 usb 2-3: new high speed USB device using ehci_hcd and address 3 usb 2-3: configuration #1 chosen from 1 choice usb 2-3: New USB device found, idVendor=04f2, idProduct=b021 usb 2-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 usb 2-3: Product: ViewSonic 1.3M, USB2.0 Webcam usb 2-3: Manufacturer: Chicony Electronics Co., Ltd. usb 2-3: SerialNumber: SN0001 usb 1-4: new low speed USB device using ohci_hcd and address 2 usb 1-4: configuration #1 chosen from 1 choice usb 1-4: New USB device found, idVendor=046d, idProduct=c01b usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-4: Product: USB-PS/2 Optical Mouse usb 1-4: Manufacturer: Logitech Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 scsi 2:0:0:0: Attached scsi generic sg2 type 5 scsi 3:0:0:0: Attached scsi generic sg3 type 5 end_request: I/O error, dev fd0, sector 0 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8904 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:08.0 to 64 usbcore: registered new interface driver usblp Linux video capture interface: v2.00 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray sr 3:0:0:0: Attached scsi CD-ROM sr1 ACPI: Power Button (CM) [PWRB] uvcvideo: Found UVC 1.00 device ViewSonic 1.3M, USB2.0 Webcam (04f2:b021) input: ViewSonic 1.3M, USB2.0 Webcam as /devices/pci0000:00/0000:00:02.1/usb2/2-3/2-3:1.0/input/input4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k usbcore: registered new interface driver uvcvideo USB Video Class driver (SVN r200) usbcore: registered new interface driver hiddev input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input5 input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-4 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1b:fc:4c:a3:b7 forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 ACPI: I/O resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM01 [0x1c40-0x1c45] ACPI: Device needs an ACPI driver i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:06.1 to 64 ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [AMC1] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:09.0 to 64 forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:1b:fc:4d:b5:90 forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 Adding 3148732k swap on /dev/sda3. Priority:-1 extents:1 across:3148732k ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000149f7aa] device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb3, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.9) type=1505 audit(1210144526.280:2): operation="profile_load" name="/bin/ping" name2="default" pid=1611 type=1505 audit(1210144526.335:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1616 type=1505 audit(1210144526.359:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1620 type=1505 audit(1210144526.387:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1627 type=1505 audit(1210144526.415:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1630 type=1505 audit(1210144526.483:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1632 type=1505 audit(1210144526.507:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1633 type=1505 audit(1210144526.531:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1634 type=1505 audit(1210144526.631:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1642 type=1505 audit(1210144526.679:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1657 powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0x8 powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xa powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xc powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xe powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10 powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12 Clocksource tsc unstable (delta = -202951138 ns) NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) NET: Registered protocol family 17 eth1: no link during initialization. ADDRCONF(NETDEV_UP): eth1: link is not ready eth0: no IPv6 routers present bootsplash: status on console 0 changed to on SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=387580
User coolo@novell.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=387580#c1
Stephan Kulow
https://bugzilla.novell.com/show_bug.cgi?id=387580
User dmartinjr@triad.rr.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=387580#c2
--- Comment #2 from David Martin
https://bugzilla.novell.com/show_bug.cgi?id=387580
User dmartinjr@triad.rr.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=387580#c3
--- Comment #3 from David Martin
https://bugzilla.novell.com/show_bug.cgi?id=387580
User dmartinjr@triad.rr.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=387580#c4
David Martin
https://bugzilla.novell.com/show_bug.cgi?id=387580
User aj@novell.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=387580#c5
Andreas Jaeger
https://bugzilla.novell.com/show_bug.cgi?id=387580
User dmartinjr@triad.rr.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=387580#c6
--- Comment #6 from David Martin
https://bugzilla.novell.com/show_bug.cgi?id=387580
User jsuchome@novell.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=387580#c7
Jiří Suchomel
https://bugzilla.novell.com/show_bug.cgi?id=387580
User jdsn@novell.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=387580#c8
J. Daniel Schmidt
participants (1)
-
bugzilla_noreply@novell.com