http://bugzilla.novell.com/show_bug.cgi?id=544161 User docx@gdmt.cz added comment http://bugzilla.novell.com/show_bug.cgi?id=544161#c2 --- Comment #2 from Lukas Dolezal 2009-10-04 04:55:50 MDT --- Created an attachment (id=320959) --> (http://bugzilla.novell.com/attachment.cgi?id=320959) Alsa-info output after fix. Alsa-info.sh output after I fixed problem by adding options to snd_hda_intel module. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

http://bugzilla.novell.com/show_bug.cgi?id=544161 User tiwai@novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=544161#c4 Takashi Iwai changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |REOPENED Resolution|FIXED | --- Comment #4 from Takashi Iwai 2009-10-05 00:34:12 MDT --- Also, try to load without model and position_fix options. Install hda-verb program from OBS home:tiwai project, http://download.opensuse.org/repositories/home:/tiwai/ then run below as root: hda-verb /dev/snd/hwC0D0 0x16 SET_AMP 0x7000 Does it fix the problem? -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

http://bugzilla.novell.com/show_bug.cgi?id=544161 User docx@gdmt.cz added comment http://bugzilla.novell.com/show_bug.cgi?id=544161#c5 --- Comment #5 from Lukas Dolezal 2009-10-05 12:35:58 MDT --- So, It is fact, that 3stack gave me more options in alsamixer than I physicaly have. But, after some laboring, I found that when I switch channels to "6ch" (from 2ch), microphone output became "line-out". In my Toshiba Satellite A110 laptop is this important, because standard headphone out has reduced basses and overall sound volume (maybe hw bug, but warranty cannot been applied :( ). I tested also "toshiba" option, but it does that, when I plugged speakers to headphone output, volume became ~50%, but in alsamixer was still 100%. When unplugged it returned back. But for me it was unusable. Other options works too (all from http://www.mjmwired.net/kernel/Documentation/sound/alsa/HD-Audio-Models.txt under ALC861). Only no option does not work. I will try hda-verb and I'll post results next time :) -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

http://bugzilla.novell.com/show_bug.cgi?id=544161 User tiwai@novell.com added comment http://bugzilla.novell.com/show_bug.cgi?id=544161#c7 Takashi Iwai changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |RESOLVED Info Provider|docx@gdmt.cz | Resolution| |FIXED --- Comment #7 from Takashi Iwai 2009-10-06 00:33:18 MDT --- OK, it's fine that you use model=3stack at your own risk :) But, since 3stack model can't get the automatic HP muting or mic switching working (because of manual selection), it's not preferable as the default setup. So I fixed model=auto to work for Toshiba now. About the volume: this codec chip has no hardware volume control for the playback. Thus, it is indeed a feature. Anyway, the fix patch is in the upstream and the kernel GIT tree. Thanks for testing! -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.