https://bugzilla.novell.com/show_bug.cgi?id=772646 https://bugzilla.novell.com/show_bug.cgi?id=772646#c1 --- Comment #1 from Foolish Ewe 2012-07-26 23:04:15 UTC --- Based on Bug 772997 (the 12.2 variant of this) I adjusted the bios settings so that the F3 and FN+F3 have the standard mapping as opposed to the non standard mapping. I can now use F3 without putting the machine to sleep and get the search functionality under 12.1. Here is output of showkey (after the BIOS adjustment), the first press and release event is for F3 the second time is FN+F3. Note that although F3 no-longer puts the machine to sleep, now FN+F3 causes the machine to suspend to RAM. This differs from the F3 key's action under windows (and according to the key cap's diagram) which is to increase the screen brightness. sudo showkey root's password: kb mode was RAW [ if you are trying this under X, it might not work since the X server is also reading /dev/console ] press any key (program terminates 10s after last keypress)... keycode 28 release ^[ORkeycode 61 press keycode 61 release keycode 142 press keycode 142 release -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=772646 https://bugzilla.novell.com/show_bug.cgi?id=772646#c3 Joey Lee changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |INVALID --- Comment #3 from Joey Lee 2012-07-30 09:17:43 UTC --- Thanks for Follish's report, set this bug to INVALID because it causes by BIOS configuration. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.