https://bugzilla.novell.com/show_bug.cgi?id=340342 Summary: aic94xx can't load sequencer firmware in initrd Product: openSUSE 11.0 Version: unspecified Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: harbaugh@ncifcrf.gov QAContact: qa@suse.de Found By: Beta-Customer If I build my mkinitrd to include the aic94xx module, the sequencer firmware is included in the initrd. But the aic94xx module can't load it: . . . [ 83.238104] ata1.00: configured for UDMA/33 [ 83.246150] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5 [ 83.276356] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found [ 83.300497] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 83.307508] ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 83.315117] aic94xx: found Adaptec AIC-9410W SAS/SATA Host Adapter, device 0000:04:02.0 [ 83.323267] scsi2 : aic94xx [ 83.328230] aic94xx: BIOS present (1,1), 1822 [ 83.332679] aic94xx: ue num:1, ue size:88 [ 83.351208] aic94xx: manuf sect SAS_ADDR 500304800003bac0 [ 83.356714] aic94xx: manuf sect PCBA SN ORG [ 83.360975] aic94xx: ms: num_phy_desc: 8 [ 83.364998] aic94xx: ms: phy0: ENABLED [ 83.368804] aic94xx: ms: phy1: ENABLED [ 83.372646] aic94xx: ms: phy2: ENABLED [ 83.376485] aic94xx: ms: phy3: ENABLED [ 83.380300] aic94xx: ms: phy4: ENABLED [ 83.384140] aic94xx: ms: phy5: ENABLED [ 83.387973] aic94xx: ms: phy6: ENABLED [ 83.391803] aic94xx: ms: phy7: ENABLED [ 83.395644] aic94xx: ms: max_phys:0x8, num_phys:0x8 [ 83.400617] aic94xx: ms: enabled_phys:0xff [ 83.414635] aic94xx: ctrla: phy0: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 [ 83.424676] aic94xx: ctrla: phy1: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 [ 83.434708] aic94xx: ctrla: phy2: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 [ 83.444749] aic94xx: ctrla: phy3: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 [ 83.454759] aic94xx: ctrla: phy4: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 [ 83.464773] aic94xx: ctrla: phy5: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 [ 83.474792] aic94xx: ctrla: phy6: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 [ 83.484808] aic94xx: ctrla: phy7: sas_addr: 500304800003bac0, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 [ 83.494841] aic94xx: max_scbs:512, max_ddbs:128 [ 83.499472] aic94xx: setting phy0 addr to 500304800003bac0 [ 83.505045] aic94xx: setting phy1 addr to 500304800003bac0 [ 83.510643] aic94xx: setting phy2 addr to 500304800003bac0 [ 83.516257] aic94xx: setting phy3 addr to 500304800003bac0 [ 83.521851] aic94xx: setting phy4 addr to 500304800003bac0 [ 83.527483] aic94xx: setting phy5 addr to 500304800003bac0 [ 83.533081] aic94xx: setting phy6 addr to 500304800003bac0 [ 83.538667] aic94xx: setting phy7 addr to 500304800003bac0 [ 83.544275] aic94xx: num_edbs:21 [ 83.547572] aic94xx: num_escbs:3 [ 143.437296] aic94xx: Failed to load sequencer firmware file aic94xx-seq.fw, error -2 [ 143.445192] aic94xx: couldn't init seqs for 0000:04:02.0 [ 143.450616] aic94xx: couldn't init the chip [ 143.456605] ACPI: PCI interrupt for device 0000:04:02.0 disabled [ 143.462712] aic94xx: probe of 0000:04:02.0 failed with error -2 Creating device nodes with udev [ 143.531403] Intel(R) PRO/1000 Network Driver - version 7.6.5-NAPI [ 143.537787] Copyright (c) 1999-2007 Intel Corporation. [ 143.543110] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 16 (level, low) -> IRQ 16 . . . The sequencer file *is* in the initrd: # gunzip -cd initrd-2.6.23.1-12-default-sassata-aic94xx | cpio -it | grep aic94xx lib/firmware/aic94xx-seq.fw lib/modules/2.6.23.1-12-default-sassata/kernel/drivers/scsi/aic94xx lib/modules/2.6.23.1-12-default-sassata/kernel/drivers/scsi/aic94xx/aic94xx.ko 89781 blocks After the system is booted, If I reload the aic94xx module it *can* find the sequencer firmware: # rmmod aic94xx # modprobe aic94xx # dmesg | grep seq [ 1828.738297] aic94xx: Found sequencer Firmware version 1.1 (V28) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.