https://bugzilla.novell.com/show_bug.cgi?id=221328 ------- Comment #5 from pavel@novell.com 2006-11-16 03:10 MST ------- Can you try to find a command which causes the oops? It looks like you are running irattach -- that is weird given that you should have no irda interfaces. Aha:# Currently the UART (SIR) mode is supported in the normal configuration. The # variable IRDA_PORT sets the used serial port. Have a look at your BIOS-Setup, # to find out which is correct. # # If you have a supported FIR chipset, specify the name of the corresponding # kernel module in IRDA_PORT, e.g. IRDA_PORT="toshoboe". FIR must be enabled in # the BIOS setup first. Sometimes you additionally have to disable the serial # port, which would be used in SIR mode via 'setserial /dev/ttyS<x> uart none' # IRDA_PORT="/dev/ircomm0" But this claims you are running irda on ircomm; no wonder it breaks. Who put ircomm there and why? (Plus error handling should be improved, but as noone maintains irda...) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.