https://bugzilla.novell.com/show_bug.cgi?id=822959
https://bugzilla.novell.com/show_bug.cgi?id=822959#c3
Carlos Robinson
Thanks for report.
Do you use default SuSEfirewall2 configuration?
AFAIK, current changes are: Telcontar:~ # diff /other/aux_01/etc/sysconfig/SuSEfirewall2~ /other/aux_01/etc/sysconfig/SuSEfirewall2 252c252 < FW_SERVICES_EXT_TCP="546" ---
FW_SERVICES_EXT_TCP="" 266c266 < FW_SERVICES_EXT_UDP="546"
FW_SERVICES_EXT_UDP="dhcpv6-client mdns" Telcontar:~ #
and they were done after the problem was detected.
Is /etc/sysconfig/SuSEfirewall2.d/services/dhcp6-server existent at your machine?
Yep. Telcontar:~ # l /other/aux_01/etc/sysconfig/SuSEfirewall2.d/services/dhcp* -rw-r--r-- 1 root root 503 Mar 27 16:40 /other/aux_01/etc/sysconfig/SuSEfirewall2.d/services/dhcp-server -rw-r--r-- 1 root root 507 Mar 27 16:40 /other/aux_01/etc/sysconfig/SuSEfirewall2.d/services/dhcp6-server Telcontar:~ #
Do you have net device where you expect dhcp replies assigned into any zone (INT, EXT, DMZ, ...)? If yes, which one? You can check it e.g. using "yast2 firewall" -> interfaces -> Look into "Configured in" column
To look in YaST, I would have to boot into that partition, and that has to wait a bit. I can tell you the contents of the firewall file: /other/aux_01/etc/sysconfig/SuSEfirewall2: FW_DEV_EXT="eth0" FW_DEV_INT="" FW_DEV_DMZ="" Is that what you want? Or this? Telcontar:~ # cat /other/aux_01/etc/sysconfig/network/ifcfg-eth0 BOOTPROTO='dhcp' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='' MTU='' NAME='RTL8111/8168B PCI Express Gigabit Ethernet controller' NETMASK='' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' USERCONTROL='no' Telcontar:~ # -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.