http://bugzilla.novell.com/show_bug.cgi?id=612910
http://bugzilla.novell.com/show_bug.cgi?id=612910#c13
--- Comment #13 from Michael Schmidt 2010-06-22 11:47:32 UTC ---
Sorry the only message to the it87 that I have found is in the
/var/log/message:
Jun 22 13:13:49 linux-a113 kernel: [ 25.993607] it87: Found IT8720F chip at
0x228, revision 8
Jun 22 13:13:49 linux-a113 kernel: [ 25.993622] it87: in3 is VCC (+5V)
Jun 22 13:13:49 linux-a113 kernel: [ 25.993626] it87: Beeping is supported
This appears several times.
If I apply the isaset commands (and ignore several message data mismas) the
sensors command says:
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +32.5°C (high = +70.0°C, crit = +81.0°C)
it8720-isa-0228
Adapter: ISA adapter
Vcore: +1.07 V (min = +0.78 V, max = +1.50 V)
Vdram: +1.49 V (min = +1.42 V, max = +1.57 V)
+3.3V: +3.33 V (min = +3.14 V, max = +3.47 V)
+5V: +5.03 V (min = +4.76 V, max = +5.24 V)
+12V: +12.24 V (min = +11.41 V, max = +12.62 V)
in5: +1.95 V (min = +0.00 V, max = +4.08 V)
in7: +3.02 V (min = +0.00 V, max = +4.08 V)
Vbat: +3.22 V
CPU Fan: 1573 RPM (min = 1000 RPM)
Sys Fan: 2163 RPM (min = 1000 RPM)
temp1: +42.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
CPU Temp: +29.0°C (low = +127.0°C, high = +70.0°C) sensor = thermal diode
temp3: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
cpu0_vid: +0.413 V
and in the /var/log/meassage is:
Jun 22 13:18:51 linux-a113 kernel: [ 327.700610] it87: Found IT8720F chip at
0x228, revision 8
Jun 22 13:18:51 linux-a113 kernel: [ 327.700625] it87: in3 is VCC (+5V)
Jun 22 13:18:51 linux-a113 kernel: [ 327.700627] it87: in7 is VCCH (+5V
Stand-By)
Jun 22 13:18:51 linux-a113 kernel: [ 327.700630] it87: Beeping is supported
--
Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.