https://bugzilla.novell.com/show_bug.cgi?id=678264
https://bugzilla.novell.com/show_bug.cgi?id=678264#c10
--- Comment #10 from David Rankin 2011-03-10 04:06:31 UTC ---
OK,
I changed xorg.conf.d/50-device.conf and uncommented:
Driver "radeon"
I then rebooted, cleared the grub boot line and added nomodeset. The results
are the same. X segfaults. The console output from startx is:
22:05 zephyr:~/tmp> cat startx-console.txt
xauth: file /root/.serverauth.3332 does not exist
xauth: (stdin):2: unknown command "fed36715b8176d4675e4edfa0c86c3f6"
X.Org X Server 1.9.3
Release Date: 2010-12-13
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux alchemy 2.6.37.1-1.2-desktop #1 SMP PREEMPT
2011-02-21 10:34:10 +0100 x86_64
Kernel command line:
root=/dev/disk/by-id/ata-WDC_WD6400BEVT-00A0RT0_WD-WX40A9996688-part6
resume=/dev/disk/by-id/ata-WDC_WD6400BEVT-00A0RT0_WD-WX40A9996688-part5
splash=silent quiet nomodeset
Build Date: 22 February 2011 10:08:09PM
Current version of pixman: 0.20.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 9 21:57:20 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
(II) [KMS] drm report modesetting isn't supported.
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e50
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_LVTM1
DDC reg: 0x7e40
Dac detection success
finished output detect: 0
finished output detect: 1
finished all detect
Dac detection success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output CRT1 disable success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Set CRTC 0 Source success
Mode 1440x900 - 1760 912 10
Picked PLL 0
best_freq: 96361
best_feedback_div: 323
best_frac_feedback_div: 0
best_ref_div: 4
best_post_div: 12
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output digital setup success
Output LCD1 enable success
Enable CRTC 0 success
Unblank CRTC 0 success
Output CRT1 disable success
Blank CRTC 1 success
Disable CRTC 1 success
Backtrace:
0: X (xorg_backtrace+0x28) [0x463678]
1: X (0x400000+0x6ae89) [0x46ae89]
2: /lib64/libc.so.6 (0x7f1ec84ed000+0x32b30) [0x7f1ec851fb30]
Segmentation fault at address (nil)
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional
information.
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Enable CRTC 0 success
Unblank CRTC 0 success
I'll attache the Xorg.0.log
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.