https://bugzilla.novell.com/show_bug.cgi?id=349881
User reitenbach@rapideye.de added comment
https://bugzilla.novell.com/show_bug.cgi?id=349881#c1
Summary: xen kernel crash after trying to umount a usb disk
Product: openSUSE 10.3
Version: Final
Platform: 64bit
OS/Version: openSUSE 10.3
Status: NEW
Severity: Critical
Priority: P5 - None
Component: Xen
AssignedTo: cgriffin@novell.com
ReportedBy: reitenbach@rapideye.de
QAContact: qa@suse.de
Found By: Customer
I had mounted a usb disk, 500GB, and was copying data from it onto the local
disk. some hours later, I tried to access the mounted disk, got an i/o error.
Then I tried to umount the /usbdisk and it ended in a segmentation fault.
Immediately after that the server became unresponsive.
After reboot I found the following kernel crash dump in /var/log/messages:
Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1):
ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x600008.
Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1):
ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x600009.
Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1):
ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000a.
Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1):
ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000b.
Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1):
ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000c.
Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1):
ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000d.
Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1):
ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000e.
Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1):
ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x60000f.
Dec 19 18:21:14 xen1 kernel: sd 6:0:0:0: [sdd] Device not ready: <6>: Sense Key
: Not Ready [current]
Dec 19 18:21:14 xen1 kernel: : Add. Sense: Logical unit not ready, initializing
command required
Dec 19 18:21:14 xen1 kernel: end_request: I/O error, dev sdd, sector 6291527
Dec 19 18:21:14 xen1 kernel: NTFS-fs error (device sdd1):
ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x600008.
Dec 19 18:21:23 xen1 kernel: NTFS-fs error (device sdd1): map_mft_record():
Failed with error code 5.
Dec 19 18:21:23 xen1 kernel: NTFS-fs error (device sdd1): map_mft_record():
Failed with error code 5.
Dec 19 18:21:24 xen1 kernel: printk: 2 messages suppressed.
Dec 19 18:21:24 xen1 kernel: NTFS-fs error (device sdd1): map_mft_record():
Failed with error code 5.
Dec 19 18:21:29 xen1 kernel: printk: 1 messages suppressed.
Dec 19 18:21:29 xen1 kernel: NTFS-fs error (device sdd1): map_mft_record():
Failed with error code 5.
Dec 19 18:21:34 xen1 kernel: printk: 13 messages suppressed.
Dec 19 18:21:34 xen1 kernel: NTFS-fs error (device sdd1): map_mft_record():
Failed with error code 5.
Dec 19 18:21:51 xen1 kernel: general protection fault: 0000 [1] SMP
Dec 19 18:21:51 xen1 kernel: last sysfs file:
/devices/pci0000:00/0000:00:01.0/irq
Dec 19 18:21:51 xen1 kernel: CPU 1
Dec 19 18:21:51 xen1 kernel: Modules linked in: nfsd exportfs lockd nfs_acl
sunrpc nls_utf8 ntfs usb_storage af_packet netbk netloop blkbk
blktap xenbus_be bridge 8021q iptable_filter ip_tables ip6_tables x_tables edd
loop dm_round_robin dm_multipath dm_mod ch st osst sr_mod
cdrom mptspi tg3 scsi_transport_spi sata_svw ata_generic pata_serverworks
libata generic container k8temp thermal processor button hwmon r
tc_cmos rtc_core rtc_lib shpchp pci_hotplug 8250_pnp 8250 serio_raw serverworks
serial_core sg ide_core i2c_piix4 i2c_core ext3 jbd mbcach
e sd_mod usbhid hid ff_memless mptsas mptscsih mptbase scsi_transport_sas
scsi_mod ehci_hcd ohci_hcd usbcore xenblk xennet
Dec 19 18:21:51 xen1 kernel: Pid: 11874, comm: umount Tainted: G N
2.6.22.13-0.3-xen #1
Dec 19 18:21:51 xen1 kernel: RIP: e030:[<ffffffff8029b758>]
[<ffffffff8029b758>] sync_buffer+0x10/0x40
Dec 19 18:21:51 xen1 kernel: RSP: e02b:ffff88005d3c5c08 EFLAGS: 00010286
Dec 19 18:21:51 xen1 kernel: RAX: 9fa39e969285757b RBX: ffff880029268f68 RCX:
ffff88005d3c5c80
Dec 19 18:21:51 xen1 kernel: RDX: ffffffffff5f9000 RSI: 0000000000000000 RDI:
ffff880029268f68
Dec 19 18:21:51 xen1 kernel: RBP: ffff88005d3c5c58 R08: ffff88000316f118 R09:
0000000000000003
Dec 19 18:21:51 xen1 kernel: R10: 0000000000000000 R11: ffffffff8029c3d0 R12:
ffff88000316f118
Dec 19 18:21:51 xen1 kernel: R13: ffff88005d3c5c68 R14: 0000000000000002 R15:
ffffffff8029b748
Dec 19 18:21:51 xen1 kernel: FS: 00002b27b7fb7b00(0000)
GS:ffffffff804dc080(0000) knlGS:0000000000000000
Dec 19 18:21:51 xen1 kernel: CS: e033 DS: 0000 ES: 0000
Dec 19 18:21:51 xen1 kernel: Process umount (pid: 11874, threadinfo
ffff88005d3c4000, task ffff880000bc1040)
Dec 19 18:21:51 xen1 kernel: Stack: ffff88000316f118 ffffffff803edb8e
ffff88006fd4fb10 ffff880029268f68
Dec 19 18:21:51 xen1 kernel: ffff8800020b3398 0000000000000002
0000000000000002 ffffffff8029b748
Dec 19 18:21:51 xen1 kernel: 0000000000000000 ffffffff803edc2d
ffff880029268f68 0000000000000002
Dec 19 18:21:51 xen1 kernel: Call Trace:
Dec 19 18:21:51 xen1 kernel: [<ffffffff803edb8e>] __wait_on_bit_lock+0x3f/0x72
Dec 19 18:21:51 xen1 kernel: [<ffffffff8029b748>] sync_buffer+0x0/0x40
Dec 19 18:21:51 xen1 kernel: [<ffffffff803edc2d>]
out_of_line_wait_on_bit_lock+0x6c/0x78
Dec 19 18:21:51 xen1 kernel: [<ffffffff8023c2c4>] wake_bit_function+0x0/0x23
Dec 19 18:21:51 xen1 kernel: [<ffffffff8029c437>]
block_invalidatepage+0x67/0xc8
Dec 19 18:21:51 xen1 kernel: [<ffffffff8025f65b>]
truncate_complete_page+0x28/0x45
Dec 19 18:21:51 xen1 kernel: [<ffffffff8025f70d>]
truncate_inode_pages_range+0x95/0x294
Dec 19 18:21:51 xen1 kernel: [<ffffffff802122e3>] xen_send_IPI_mask+0x9c/0xf1
Dec 19 18:21:51 xen1 kernel: [<ffffffff8028dc37>] iput+0x42/0x7b
Dec 19 18:21:51 xen1 kernel: [<ffffffff8028e844>] dispose_list+0x50/0xf7
Dec 19 18:21:51 xen1 kernel: [<ffffffff8028ed08>] invalidate_inodes+0xd5/0xf3
Dec 19 18:21:51 xen1 kernel: [<ffffffff8027d914>]
generic_shutdown_super+0x39/0xf0
Dec 19 18:21:51 xen1 kernel: [<ffffffff8027d9d8>] kill_block_super+0xd/0x1e
Dec 19 18:21:51 xen1 kernel: [<ffffffff8027daa3>] deactivate_super+0x6a/0x82
Dec 19 18:21:51 xen1 kernel: [<ffffffff80290df9>] sys_umount+0x249/0x25a
Dec 19 18:21:51 xen1 kernel: [<ffffffff8026b102>] remove_vma+0x4c/0x53
Dec 19 18:21:51 xen1 kernel: [<ffffffff8027ef3d>] sys_newstat+0x19/0x31
Dec 19 18:21:51 xen1 kernel: [<ffffffff802094c6>] system_call+0x86/0x8b
Dec 19 18:21:51 xen1 kernel: [<ffffffff80209440>] system_call+0x0/0x8b
Dec 19 18:21:51 xen1 kernel:
Dec 19 18:21:51 xen1 kernel:
Dec 19 18:21:51 xen1 kernel: Code: 48 8b 40 08 48 8b 80 08 01 00 00 48 85 c0 74
16 48 8b 78 68
Dec 19 18:21:51 xen1 kernel: RIP [<ffffffff8029b758>] sync_buffer+0x10/0x40
Dec 19 18:21:51 xen1 kernel: RSP <ffff88005d3c5c08>
Dec 19 18:21:51 xen1 kernel: WARNING: at kernel/exit.c:872 do_exit()
Dec 19 18:21:51 xen1 kernel:
Dec 19 18:21:51 xen1 kernel: Call Trace:
Dec 19 18:21:51 xen1 kernel: [<ffffffff8029b748>] sync_buffer+0x0/0x40
Dec 19 18:21:51 xen1 kernel: [<ffffffff8022c16b>] do_exit+0x51/0x870
Dec 19 18:21:51 xen1 kernel: [<ffffffff8029b748>] sync_buffer+0x0/0x40
Dec 19 18:21:51 xen1 kernel: [<ffffffff8020a685>] kernel_math_error+0x0/0x71
Dec 19 18:21:51 xen1 kernel: [<ffffffff803ef6f7>] error_exit+0x0/0x79
Dec 19 18:21:51 xen1 kernel: [<ffffffff8029b748>] sync_buffer+0x0/0x40
Dec 19 18:21:51 xen1 kernel: [<ffffffff8029c3d0>]
block_invalidatepage+0x0/0xc8
Dec 19 18:21:51 xen1 kernel: [<ffffffff8029b758>] sync_buffer+0x10/0x40
Dec 19 18:21:51 xen1 kernel: [<ffffffff803edb8e>] __wait_on_bit_lock+0x3f/0x72
Dec 19 18:21:51 xen1 kernel: [<ffffffff8029b748>] sync_buffer+0x0/0x40
Dec 19 18:21:51 xen1 kernel: [<ffffffff803edc2d>]
out_of_line_wait_on_bit_lock+0x6c/0x78
Dec 19 18:21:51 xen1 kernel: [<ffffffff8023c2c4>] wake_bit_function+0x0/0x23
Dec 19 18:21:51 xen1 kernel: [<ffffffff8029c437>]
block_invalidatepage+0x67/0xc8
Dec 19 18:21:51 xen1 kernel: [<ffffffff8025f65b>]
truncate_complete_page+0x28/0x45
Dec 19 18:21:51 xen1 kernel: [<ffffffff8025f70d>]
truncate_inode_pages_range+0x95/0x294
Dec 19 18:21:51 xen1 kernel: [<ffffffff802122e3>] xen_send_IPI_mask+0x9c/0xf1
Dec 19 18:21:51 xen1 kernel: [<ffffffff8028dc37>] iput+0x42/0x7b
Dec 19 18:21:51 xen1 kernel: [<ffffffff8028e844>] dispose_list+0x50/0xf7
Dec 19 18:21:51 xen1 kernel: [<ffffffff8028ed08>] invalidate_inodes+0xd5/0xf3
Dec 19 18:21:51 xen1 kernel: [<ffffffff8027d914>]
generic_shutdown_super+0x39/0xf0
Dec 19 18:21:51 xen1 kernel: [<ffffffff8027d9d8>] kill_block_super+0xd/0x1e
Dec 19 18:21:51 xen1 kernel: [<ffffffff8027daa3>] deactivate_super+0x6a/0x82
Dec 19 18:21:51 xen1 kernel: [<ffffffff80290df9>] sys_umount+0x249/0x25a
Dec 19 18:21:51 xen1 kernel: [<ffffffff8026b102>] remove_vma+0x4c/0x53
Dec 19 18:21:51 xen1 kernel: [<ffffffff8027ef3d>] sys_newstat+0x19/0x31
Dec 19 18:35:52 xen1 syslog-ng[6970]: syslog-ng version 1.6.12 starting
all available updates by today were installed, here a dmesg:
Linux version 2.6.22.13-0.3-xen (geeko@buildhost) (gcc version 4.2.1 (SUSE
Linux)) #1 SMP 2007/11/19 15:02:58 UTC
Command line: root=/dev/disk/by-id/scsi-3500000e01625dfd0-part2 vga=normal
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000007588f000 (usable)
Entering add_active_range(0, 0, 481423) 0 entries of 256 used
end_pfn_map = 481423
DMI present.
Entering add_active_range(0, 0, 481423) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 481423
DMA32 481423 -> 481423
Normal 481423 -> 481423
early_node_map[1] active PFN ranges
0: 0 -> 481423
On node 0 totalpages: 481423
DMA zone: 6581 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 474842 pages, LIFO batch:31
DMA32 zone: 0 pages used for memmap
Normal zone: 0 pages used for memmap
ACPI: RSDP 000F8510, 0024 (r2 PTLTD )
ACPI: XSDT 7F762B1D, 006C (r1 PTLTD XSDT 6040000 LTP 0)
ACPI: FACP 7F762B89, 0084 (r2 HP TREX 6040000 MSFT 2000001)
ACPI: DSDT 7F762C0D, 3F8A (r1 HP TREX 6040000 MSFT 2000002)
ACPI: FACS 7F76FFC0, 0040
ACPI: SPMI 7F766B97, 0040 (r5 HP TREX 6040000 PTL 1)
ACPI: SSDT 7F766BD7, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: SRAT 7F766DDD, 00A0 (r1 AMD HAMMER 6040000 AMD 1)
ACPI: HPET 7F766E7D, 0038 (r1 BRCM EXPLOSN 6040000 BRCM 2000001)
ACPI: SSDT 7F766EB5, 0049 (r1 PTLTD SSDT 6040000 AMD 2000001)
ACPI: MCFG 7F766EFE, 003C (r1 PTLTD MCFG 6040000 AMD 2000001)
ACPI: SPCR 7F766F3A, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
ACPI: APIC 7F766F8A, 0076 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16])
IOAPIC[1]: apic_id 3, address 0xfec01000, GSI 16-31
ACPI: IOAPIC (id[0x04] address[0xfec02000] gsi_base[32])
IOAPIC[2]: apic_id 4, address 0xfec02000, GSI 32-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7f800000:7f400000)
PERCPU: Allocating 24952 bytes of per cpu data
Built 1 zonelists. Total pages: 474842
Kernel command line: root=/dev/disk/by-id/scsi-3500000e01625dfd0-part2
vga=normal
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 2194.618 MHz processor.
Console: colour VGA+ 80x50
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Software IO TLB enabled:
Aperture: 2 megabytes
Kernel range: ffff88000351d000 - ffff88000371d000
Address size: 25 bits
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 1862912k/1925692k available (2007k kernel code, 53944k reserved, 918k
data, 188k init)
Calibrating delay using timer specific routine.. 4390.50 BogoMIPS (lpj=8781008)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
Unpacking initramfs... done
Freeing initrd memory: 10571k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 715 Objects with 88 Devices 245 Methods 23 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 1 Objects with 0 Devices 1 Methods 0 Regions
tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
SMP alternatives: switching to SMP code
Brought up 2 CPUs
Initializing CPU#1
migration_cost=499
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int
0x9
evgpeblk-0956 [00] ev_create_gpe_block : GPE 20 to 3F [_GPE] 4 regs on int
0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 0 Runtime GPEs
in this block
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs
in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package
initialization:.........................................................................
Initialized 18/23 Regions 0/0 Fields 19/19 Buffers 36/39 Packages (733 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.
Executed 1 _INI methods requiring 0 _STA executions (examined 94 objects)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXB_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXB_.PPBX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB4.NICB._PRT]
ACPI: PCI Interrupt Link [LNKU] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKW] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKS] (IRQs 5 *7 11)
ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 *5 7 11 12 14 15)
ACPI: PCI Interrupt Link [LN01] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN02] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN03] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN04] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN05] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN06] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN07] (IRQs 3 4 *5 7 11 12 14 15)
ACPI: PCI Interrupt Link [LN08] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN09] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN0A] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN0B] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN0C] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN0D] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN0E] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN0F] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 *5 7 11 12 14 15)
ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN1A] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN1B] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN1C] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN1D] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LN1E] (IRQs 3 4 5 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LN1F] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
xen_mem: Initialising balloon driver.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
ACPI: RTC can wake from S4
pnp: 00:00: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:08: ioport range 0x40b-0x40b has been reserved
pnp: 00:08: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:08: ioport range 0x4d6-0x4d6 has been reserved
pnp: 00:08: ioport range 0x500-0x560 has been reserved
pnp: 00:08: ioport range 0x558-0x55b has been reserved
PCI: Bridge: 0000:01:0d.0
IO window: 3000-3fff
MEM window: dfc00000-dfcfffff
PREFETCH window: 80000000-801fffff
PCI: Bridge: 0000:00:01.0
IO window: 2000-3fff
Time: xen clocksource has been installed.
MEM window: dfc00000-dfdfffff
PREFETCH window: 80000000-802fffff
PCI: Bridge: 0000:03:00.0
IO window: 4000-4fff
MEM window: dfa00000-dfafffff
PREFETCH window: 80300000-803fffff
PCI: Bridge: 0000:00:06.0
IO window: 4000-4fff
MEM window: dfa00000-dfbfffff
PREFETCH window: 80300000-803fffff
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:08.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: disabled.
PCI: Bridge: 0000:08:00.0
IO window: disabled.
MEM window: dfe00000-dfefffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0a.0
IO window: disabled.
MEM window: dfe00000-dfefffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 32 (level, low) -> IRQ 32
PCI: Setting latency timer of device 0000:00:06.0 to 64
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 32 (level, low) -> IRQ 32
PCI: Setting latency timer of device 0000:03:00.0 to 64
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 32 (level, low) -> IRQ 32
PCI: Setting latency timer of device 0000:00:07.0 to 64
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 32 (level, low) -> IRQ 32
PCI: Setting latency timer of device 0000:00:08.0 to 64
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 32 (level, low) -> IRQ 32
PCI: Setting latency timer of device 0000:00:09.0 to 64
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 32 (level, low) -> IRQ 32
PCI: Setting latency timer of device 0000:00:0a.0 to 64
PCI: Setting latency timer of device 0000:08:00.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1198085568.932:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:04.0
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
PCI: Setting latency timer of device 0000:00:08.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:08.0:pcie00]
PCI: Setting latency timer of device 0000:00:09.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:09.0:pcie00]
PCI: Setting latency timer of device 0000:00:0a.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0a.0:pcie00]
Real Time Clock Driver v1.12ac
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.2
Event-channel device installed.
PNP: PS/2 Controller [PNP0303:Z000] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
NET: Registered protocol family 1
Freeing unused kernel memory: 188k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
SCSI subsystem initialized
usbcore: registered new device driver usb
Fusion MPT base driver 3.04.05
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SAS Host driver 3.04.05
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16
mptbase: Initiating ioc0 bringup
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKU] -> GSI 10 (level, low) ->
IRQ 10
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.0: irq 10, io mem 0xdff05000
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.13-0.3-xen ohci_hcd
usb usb1: SerialNumber: 0000:00:03.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKU] -> GSI 10 (level, low) ->
IRQ 10
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.1: irq 10, io mem 0xdff06000
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.13-0.3-xen ohci_hcd
usb usb2: SerialNumber: 0000:00:03.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:03.2[A] -> Link [LNKU] -> GSI 10 (level, low) ->
IRQ 10
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:03.2: irq 10, io mem 0xdff07000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.22.13-0.3-xen ehci_hcd
usb usb3: SerialNumber: 0000:00:03.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ioc0: SAS1068: Capabilities={Initiator}
usb 3-3: new high speed USB device using ehci_hcd and address 2
usb 3-3: new device found, idVendor=04cc, idProduct=1520
usb 3-3: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-3: configuration #1 chosen from 1 choice
hub 3-3:1.0: USB hub found
hub 3-3:1.0: 3 ports detected
usb 2-2: new full speed USB device using ohci_hcd and address 2
usb 2-2: new device found, idVendor=0000, idProduct=0000
usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: SE USB Device
usb 2-2: Manufacturer: ServerEngines
usb 2-2: SerialNumber: 4004F4854360B4
usb 2-2: configuration #1 chosen from 1 choice
scsi0 : ioc0: LSISAS1068, FwRev=01102100h, Ports=1, MaxQ=511, IRQ=16
scsi 0:0:0:0: Direct-Access HP DF072A9844 HPD0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 143374738 512-byte hardware sectors (73408 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: cf 00 10 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and
FUA
sd 0:0:0:0: [sda] 143374738 512-byte hardware sectors (73408 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: cf 00 10 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and
FUA
sda:<6>usbcore: registered new interface driver hiddev
sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
input: ServerEngines SE USB Device as /class/input/input1
input: USB HID v1.11 Keyboard [ServerEngines SE USB Device] on
usb-0000:00:03.1-2
input: ServerEngines SE USB Device as /class/input/input2
input: USB HID v1.11 Mouse [ServerEngines SE USB Device] on usb-0000:00:03.1-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 0:0:0:0: Attached scsi generic sg0 type 0
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
ACPI Exception (processor_core-0789): AE_NOT_FOUND, Processor Device is not
present [20070126]
ACPI Exception (processor_core-0789): AE_NOT_FOUND, Processor Device is not
present [20070126]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:04 failed with error -16
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
piix4_smbus 0000:00:02.0: Found 0000:00:02.0 device
SvrWks HT1000: IDE controller at PCI slot 0000:00:02.1
SvrWks HT1000: chipset revision 0
SvrWks HT1000: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1c00-0x1c07, BIOS settings: hda:pio, hdb:pio
Probing IDE interface ide0...
libata version 3.00 loaded.
Fusion MPT SPI Host driver 3.04.05
ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 32 (level, low) -> IRQ 32
mptbase: Initiating ioc1 bringup
sata_svw 0000:01:0e.0: version 2.2
ACPI: PCI Interrupt Link [LNKS] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:0e.0[A] -> Link [LNKS] -> GSI 11 (level, low) ->
IRQ 11
scsi1 : sata_svw
scsi2 : sata_svw
scsi3 : sata_svw
scsi4 : sata_svw
ata1: SATA max UDMA/133 cmd 0xffffc20000030000 ctl 0xffffc20000030020 bmdma
0xffffc20000030030 irq 11
ata2: SATA max UDMA/133 cmd 0xffffc20000030100 ctl 0xffffc20000030120 bmdma
0xffffc20000030130 irq 11
ata3: SATA max UDMA/133 cmd 0xffffc20000030200 ctl 0xffffc20000030220 bmdma
0xffffc20000030230 irq 11
ata4: SATA max UDMA/133 cmd 0xffffc20000030300 ctl 0xffffc20000030320 bmdma
0xffffc20000030330 irq 11
ata1: SATA link down (SStatus 4 SControl 300)
ioc1: 53C1030: Capabilities={Initiator,Target}
ata2: SATA link down (SStatus 4 SControl 300)
scsi5 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=32
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
scsi 5:0:0:0: Direct-Access transtec T5016R 0001 PQ: 0 ANSI: 3
target5:0:0: Beginning Domain Validation
target5:0:0: Domain Validation skipping write tests
target5:0:0: Ending Domain Validation
target5:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
sd 5:0:0:0: [sdb] 3515580416 512-byte hardware sectors (1799977 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: ad 00 00 08
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 5:0:0:0: [sdb] 3515580416 512-byte hardware sectors (1799977 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: ad 00 00 08
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
sdb: p7 exceeds device capacity
sd 5:0:0:0: [sdb] Attached SCSI disk
sd 5:0:0:0: Attached scsi generic sg1 type 0
scsi: host 5 channel 0 id 0 lun 0x00000200080c0400 has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 0 lun 0xff010000ffffffff has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 0 lun 0x00028080000a0000 has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 0 lun33554435 has a LUN larger than allowed by the
host adapter
scsi: host 5 channel 0 id 0 lun772 has a LUN larger than allowed by the host
adapter
scsi: host 5 channel 0 id 0 lun 0x0005008002000001 has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 0 lun 0x0006001440000000 has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 0 lun 0x040703462e800000 has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 0 lun 0x0009000015220000 has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 0 lun 0x070a001130000000 has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 0 lun 0x000bffff080c0400 has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 0 lun 0xff0c0000ffffffff has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 0 lun168165389 has a LUN larger than allowed by the
host adapter
scsi: host 5 channel 0 id 0 lun 0x000e0c16c0000080 has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 0 lun 0x000f00000000d18b has a LUN larger than
currently supported.
scsi 5:0:1:0: Direct-Access transtec T5016R 0001 PQ: 0 ANSI: 3
target5:0:1: Beginning Domain Validation
target5:0:1: Domain Validation skipping write tests
target5:0:1: Ending Domain Validation
target5:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
sd 5:0:1:0: [sdc] 3515580416 512-byte hardware sectors (1799977 MB)
sd 5:0:1:0: [sdc] Write Protect is off
sd 5:0:1:0: [sdc] Mode Sense: ad 00 00 08
sd 5:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 5:0:1:0: [sdc] 3515580416 512-byte hardware sectors (1799977 MB)
sd 5:0:1:0: [sdc] Write Protect is off
sd 5:0:1:0: [sdc] Mode Sense: ad 00 00 08
sd 5:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdc: sdc1
sd 5:0:1:0: [sdc] Attached SCSI disk
sd 5:0:1:0: Attached scsi generic sg2 type 0
scsi: host 5 channel 0 id 1 lun 0x00000200080c0400 has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 1 lun 0xff010000ffffffff has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 1 lun 0x00028080000a0000 has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 1 lun33554435 has a LUN larger than allowed by the
host adapter
scsi: host 5 channel 0 id 1 lun772 has a LUN larger than allowed by the host
adapter
scsi: host 5 channel 0 id 1 lun 0x0005008002000001 has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 1 lun 0x0006001440000000 has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 1 lun 0x040703462e800000 has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 1 lun 0x0009000015220000 has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 1 lun 0x070a001130000000 has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 1 lun 0x000bffff080c0400 has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 1 lun 0xff0c0000ffffffff has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 1 lun168165389 has a LUN larger than allowed by the
host adapter
scsi: host 5 channel 0 id 1 lun 0x000e0c16c0000080 has a LUN larger than
currently supported.
scsi: host 5 channel 0 id 1 lun 0x000f00000000d18b has a LUN larger than
currently supported.
tg3.c:v3.77 (May 31, 2007)
ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 36 (level, low) -> IRQ 36
eth0: Tigon3 [partno(BCM95715) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit)
10/100/1000Base-T Ethernet 00:18:71:86:fa:2e
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76148000] dma_mask[40-bit]
ACPI: PCI Interrupt 0000:09:04.1[B] -> GSI 36 (level, low) -> IRQ 36
eth1: Tigon3 [partno(BCM95715) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit)
10/100/1000Base-T Ethernet 00:18:71:87:4e:9d
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76148000] dma_mask[40-bit]
attempt to access beyond end of device
sdb: rw=0, want=5303160666, limit=3515580416
Buffer I/O error on device sdb7, logical block 2143228416
attempt to access beyond end of device
sdb: rw=0, want=5303160668, limit=3515580416
Buffer I/O error on device sdb7, logical block 2143228417
attempt to access beyond end of device
sdb: rw=0, want=5303160670, limit=3515580416
Buffer I/O error on device sdb7, logical block 2143228418
attempt to access beyond end of device
sdb: rw=0, want=5303160672, limit=3515580416
Buffer I/O error on device sdb7, logical block 2143228419
attempt to access beyond end of device
sdb: rw=0, want=5303160666, limit=3515580416
Buffer I/O error on device sdb7, logical block 2143228416
attempt to access beyond end of device
sdb: rw=0, want=5303160668, limit=3515580416
Buffer I/O error on device sdb7, logical block 2143228417
attempt to access beyond end of device
sdb: rw=0, want=5303160670, limit=3515580416
Buffer I/O error on device sdb7, logical block 2143228418
attempt to access beyond end of device
sdb: rw=0, want=5303160672, limit=3515580416
Buffer I/O error on device sdb7, logical block 2143228419
attempt to access beyond end of device
sdb: rw=0, want=5303160666, limit=3515580416
Buffer I/O error on device sdb7, logical block 2143228416
attempt to access beyond end of device
sdb: rw=0, want=5303160668, limit=3515580416
Buffer I/O error on device sdb7, logical block 2143228417
attempt to access beyond end of device
sdb: rw=0, want=5303160670, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160672, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160810, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160810, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160810, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160810, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160810, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160810, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160810, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160746, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160748, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160750, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160752, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160794, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160796, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160798, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160800, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160810, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160810, limit=3515580416
Adding 4474060k swap on /dev/sda1. Priority:-1 extents:1 across:4474060k
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
st: Version 20070203, fixed bufsize 32768, s/g segs 256
SCSI Media Changer driver v0.25
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: table: 253:1: multipath: error getting device
device-mapper: ioctl: error adding target to table
attempt to access beyond end of device
sdb: rw=0, want=5303160666, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160668, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160670, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160672, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160666, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160668, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160670, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160672, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160794, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160796, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160798, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160800, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160794, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160796, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160798, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160800, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160666, limit=3515580416
loop: module loaded
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
attempt to access beyond end of device
sdb: rw=0, want=5303160666, limit=3515580416
printk: 35 messages suppressed.
Buffer I/O error on device sdb7, logical block 2143228416
attempt to access beyond end of device
sdb: rw=0, want=5303160668, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160670, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160672, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160666, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160668, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160670, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160672, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160666, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160668, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160670, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160672, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160810, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160810, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160810, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160810, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160810, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160810, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160810, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160746, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160748, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160750, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160752, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160794, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160796, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160798, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160800, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160810, limit=3515580416
attempt to access beyond end of device
sdb: rw=0, want=5303160810, limit=3515580416
PM: Writing back config space on device 0000:09:04.0 at offset 3 (was 804000,
writing 804010)
PM: Writing back config space on device 0000:09:04.0 at offset 1 (was 2b00000,
writing 2b00146)
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
PM: Writing back config space on device 0000:09:04.1 at offset 3 (was 804000,
writing 804010)
PM: Writing back config space on device 0000:09:04.1 at offset 1 (was 2b00000,
writing 2b00146)
tg3: eth1: Link is up at 100 Mbps, full duplex.
tg3: eth1: Flow control is off for TX and off for RX.
802.1Q VLAN Support v1.8 Ben Greear