https://bugzilla.novell.com/show_bug.cgi?id=713194 https://bugzilla.novell.com/show_bug.cgi?id=713194#c0 Summary: Vlan interface does not work Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: openSUSE 11.4 Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: luizluca@tre-sc.gov.br QAContact: qa@suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:6.0) Gecko/20100101 Firefox/6.0 Hello, First of all, yast cannot configure correctly a vlan interface using a bond0. When I configure it, it copies the bond0 configuration and just rename it to ifcfg-bond0.<vlanid>. However, the network scripts does not bring it up as they consider it a bond device, which need bond interfaces. I created by hand the same configuration that works with SLES. ifcfg-vlan<vlan-id> and defined bond0 as its device. However, even with the devices up, I get no network traffic. All configurations seems to be OK: # cat /etc/sysconfig/network/ifcfg-bond0 BONDING_MASTER='yes' BONDING_MODULE_OPTS='mode=802.3ad miimon=100' BONDING_SLAVE0='eth0' BONDING_SLAVE1='eth1' BOOTPROTO='none' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='' MTU='' NAME='' NETMASK='' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' USERCONTROL='no' # cat /etc/sysconfig/network/ifcfg-vlan1704 BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='0.0.0.0/32' MTU='' NAME='' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' USERCONTROL='no' ETHERDEVICE='bond0' # cat /etc/sysconfig/network/ifcfg-vlan1709 BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='0.0.0.0/32' MTU='' NAME='' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' USERCONTROL='no' ETHERDEVICE='bond0' # cat /proc/net/bonding/bond0 /proc/net/vlan/* Ethernet Channel Bonding Driver: v3.7.0 (June 2, 2010) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2 (0) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: slow Aggregator selection policy (ad_select): stable Active Aggregator Info: Aggregator ID: 1 Number of ports: 2 Actor Key: 17 Partner Key: 301 Partner Mac Address: 00:21:91:05:b7:e5 Slave Interface: eth0 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:1c:c4:ee:8c:ce Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth1 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:1c:c4:ee:8c:cc Aggregator ID: 1 Slave queue ID: 0 VLAN Dev name | VLAN ID Name-Type: VLAN_NAME_TYPE_PLUS_VID_NO_PAD vlan1704 | 1704 | bond0 vlan1709 | 1709 | bond0 vlan1704 VID: 1704 REORDER_HDR: 1 dev->priv_flags: 8001 total frames received 0 total bytes received 0 Broadcast/Multicast Rcvd 0 total frames transmitted 18 total bytes transmitted 1372 total headroom inc 0 total encap on xmit 0 Device: bond0 INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 EGRESS priority mappings: vlan1709 VID: 1709 REORDER_HDR: 1 dev->priv_flags: 8001 total frames received 0 total bytes received 0 Broadcast/Multicast Rcvd 0 total frames transmitted 18 total bytes transmitted 1372 total headroom inc 0 total encap on xmit 0 Device: bond0 INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 EGRESS priority mappings: The bond interface: bond0 Link encap:Ethernet HWaddr 00:1C:C4:EE:8C:CE inet6 addr: fe80::21c:c4ff:feee:8cce/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:810 errors:0 dropped:0 overruns:0 frame:0 TX packets:335 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:77953 (76.1 Kb) TX bytes:40652 (39.6 Kb) And the interfaces with no rx vlan1704 Link encap:Ethernet HWaddr 00:1C:C4:EE:8C:CE inet6 addr: fe80::21c:c4ff:feee:8cce/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:18 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:1372 (1.3 Kb) vlan1709 Link encap:Ethernet HWaddr 00:1C:C4:EE:8C:CE inet6 addr: fe80::21c:c4ff:feee:8cce/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:18 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:1372 (1.3 Kb) Wireshark shows that the tagged packages are received in bond0 interface. The problem is just that it does not get to vlan<vlanid> interfaces. THe hardware is a ProLiant DL380 G5, Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet. Opensuse is 11.4, x86_64, fully updated. Reproducible: Always Steps to Reproduce: 1. configure vlan as shown before 2. try to use the network Actual Results: 3. no package (tagged) is received from network in vlan interface Expected Results: 3. the tagged package should arrive in the respective vlan interface -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.