https://bugzilla.novell.com/show_bug.cgi?id=359139
User mmorisot.abonnement@belcenter.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=359139#c1
Summary: No support for device type: thermal
Product: openSUSE 10.3
Version: Final
Platform: x86-64
OS/Version: openSUSE 10.3
Status: NEW
Severity: Normal
Priority: P5 - None
Component: Kernel
AssignedTo: kernel-maintainers@forge.provo.novell.com
ReportedBy: mmorisot.abonnement@belcenter.com
QAContact: qa@suse.de
Found By: Customer
hello,
I get the following message: No support for device type: thermal during a
"acpi-t" . I had not noticed before. Is this normal?
Thanks
dmesg
Linux version 2.6.22.16-0.2-default (geeko@buildhost) (gcc version 4.2.1 (SUSE
Linux)) #1 SMP 2008/02/01 19:36:55 UTC
Command line: root=/dev/disk/by-id/scsi-SATA_TOSHIBA_MK1637G_87HTF301S-part5
vga=0x314 resume=/dev/sda6 splash=silent
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
BIOS-e820: 000000007fed0000 - 000000007fedf000 (ACPI NVS)
BIOS-e820: 000000007fedf000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 523984) 1 entries of 3200 used
end_pfn_map = 1048576
DMI present.
ACPI: RSDP 000F8240, 0024 (r2 HP )
ACPI: XSDT 7FED1B96, 007C (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
ACPI: FACP 7FEDBC6C, 00F4 (r3 HP 30CC 6040000 ALAN 1)
ACPI: DSDT 7FED3071, 8B87 (r1 HP 30CB 6040000 INTL 20061109)
ACPI: FACS 7FEDEFC0, 0040
ACPI: HPET 7FEDBD60, 0038 (r1 HP 30CB 6040000 LOHR 5A)
ACPI: MCFG 7FEDBD98, 003C (r1 HP 30CB 6040000 LOHR 5A)
ACPI: TMOR 7FEDBDD4, 0026 (r1 HP 30CC 6040000 PTL 3)
ACPI: APIC 7FEDBDFA, 0068 (r1 HP 30CB 6040000 LTP 0)
ACPI: BOOT 7FEDBE62, 0028 (r1 HP 30CB 6040000 LTP 1)
ACPI: SLIC 7FEDBE8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)
ACPI: SSDT 7FED2D94, 02DD (r1 HP 30CB 1000 INTL 20061109)
ACPI: SSDT 7FED2184, 025F (r1 HP 30CB 3000 INTL 20061109)
ACPI: SSDT 7FED20DE, 00A6 (r1 HP 30CB 3000 INTL 20061109)
ACPI: SSDT 7FED1C12, 04CC (r1 HP 30CB 3000 INTL 20061109)
No NUMA configuration found
Faking a node at 0000000000000000-000000007fed0000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 523984) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000007fed0000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 523984
On node 0 totalpages: 523887
DMA zone: 56 pages used for memmap
DMA zone: 1271 pages reserved
DMA zone: 2672 pages, LIFO batch:0
DMA32 zone: 7107 pages used for memmap
DMA32 zone: 512781 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 50296 bytes of per cpu data
Built 1 zonelists. Total pages: 515453
Kernel command line:
root=/dev/disk/by-id/scsi-SATA_TOSHIBA_MK1637G_87HTF301S-part5 vga=0x314
resume=/dev/sda6 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2194.749 MHz processor.
Console: colour dummy device 80x25
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2057192k/2095936k available (2053k kernel code, 38356k reserved, 1017k
data, 316k init)
Calibrating delay using timer specific routine.. 4393.75 BogoMIPS (lpj=8787506)
Security Framework v1.0.0 initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 0/0 -> Node 0
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
Unpacking initramfs... done
Freeing initrd memory: 4390k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 1011 Objects with 87 Devices 257 Methods 23 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 15 Objects with 3 Devices 9 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0005) - 13 Objects with 0 Devices 4 Methods 0 Regions
tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
Using local APIC timer interrupts.
result 12470166
Detected 12.470 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4389.53 BogoMIPS (lpj=8779070)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
Brought up 2 CPUs
migration_cost=10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - efffffff
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int
0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 8 Runtime GPEs
in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package
initialization:..................................................................
Initialized 19/23 Regions 4/4 Fields 27/27 Buffers 17/22 Packages (1059 nodes)
Initializing Device/Processor/Thermal objects by executing _INI
methods:<4>ACPI: System BIOS is requesting _OSI(Linux)
ACPI: Please test with "acpi_osi=!Linux"
Please send dmidecode to linux-acpi@vger.kernel.org
.
Executed 1 _INI methods requiring 0 _STA executions (examined 95 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: c4000000-c6ffffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1c.0
IO window: 4000-7fff
MEM window: f4000000-f7ffffff
PREFETCH window: f0000000-f3ffffff
PCI: Bridge: 0000:00:1c.1
IO window: 8000-bfff
MEM window: bc000000-bfffffff
PREFETCH window: c8000000-cbffffff
PCI: Bridge: 0000:00:1c.5
IO window: c000-cfff
MEM window: f8000000-f80fffff
PREFETCH window: 88000000-880fffff
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: f8100000-f81fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
Time: hpet clocksource has been installed.
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Simple Boot Flag at 0x35 set to 0x1
audit: initializing netlink socket (disabled)
audit(1202285870.580:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie02]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
Allocate Port Service[0000:00:1c.5:pcie03]
vesafb: framebuffer at 0xc5000000, mapped to 0xffffc20010b80000, using 3750k,
total 14336k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 78734 bytes
bootsplash: ...found (800x600, 27773 bytes, v3).
Console: switching to colour frame buffer device 96x33
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad as /class/input/input2
NET: Registered protocol family 1
Freeing unused kernel memory: 316k freed
ACPI: SSDT 7FED2A52, 027A (r1 HP 30CB 3000 INTL 20061109)
Parsing all Control Methods:
Table [SSDT](id 007D) - 6 Objects with 0 Devices 3 Methods 0 Regions
ACPI: SSDT 7FED23E3, 05EA (r1 HP 30CB 3001 INTL 20061109)
Parsing all Control Methods:
Table [SSDT](id 007E) - 1 Objects with 0 Devices 1 Methods 0 Regions
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7FED2CCC, 00C8 (r1 HP 30CB 3000 INTL 20061109)
Parsing all Control Methods:
Table [SSDT](id 0082) - 4 Objects with 0 Devices 4 Methods 0 Regions
ACPI: SSDT 7FED29CD, 0085 (r1 HP 30CB 3000 INTL 20061109)
Parsing all Control Methods:
Table [SSDT](id 0083) - 1 Objects with 0 Devices 1 Methods 0 Regions
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Exception (thermal-0318): AE_BAD_DATA, No critical threshold [20070126]
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 cmd 0xffffc20000348100 ctl 0x0000000000000000 bmdma
0x0000000000000000 irq 4347
ata2: SATA max UDMA/133 cmd 0xffffc20000348180 ctl 0x0000000000000000 bmdma
0x0000000000000000 irq 4347
ata3: SATA max UDMA/133 cmd 0xffffc20000348200 ctl 0x0000000000000000 bmdma
0x0000000000000000 irq 4347
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: TOSHIBA MK1637GSX, DL032C, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: TOSHIBA MK1637GSX, DL032C, max UDMA/100
ata3.00: 312581808 sectors, multi 16: LBA48
ata3.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1637GS DL03 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1637GS DL03 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma
0x00000000000118a0 irq 14
ata5: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma
0x00000000000118a8 irq 15
ata4.00: ATAPI: MATSHITADVD-RAM UJ-851S, 1.50, max MWDMA2
ata4.00: configured for MWDMA2
scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-851S 1.50 PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.16-0.2-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda:<6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.16-0.2-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdb:<7>PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.22.16-0.2-default ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.7
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.22.16-0.2-default ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
usb usb5: new device found, idVendor=0000, idProduct=0000
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.22.16-0.2-default uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 3-2: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
usb usb6: new device found, idVendor=0000, idProduct=0000
usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.22.16-0.2-default uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 3-2: new device found, idVendor=1164, idProduct=1edc
usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: STK7700D
usb 3-2: Manufacturer: YUANRD
usb 3-2: SerialNumber: 0000000001
usb 3-2: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
usb usb7: new device found, idVendor=0000, idProduct=0000
usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.22.16-0.2-default uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
usb 4-4: new high speed USB device using ehci_hcd and address 3
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 4-4: new device found, idVendor=064e, idProduct=a101
usb 4-4: new device strings: Mfr=2, Product=1, SerialNumber=3
usb 4-4: Product: HP Webcam
usb 4-4: Manufacturer: SuYin
usb 4-4: SerialNumber: CN0314-OV02-VH-R03.02.02
usb 4-4: configuration #1 chosen from 1 choice
usb 6-1: new full speed USB device using uhci_hcd and address 2
usb 6-1: new device found, idVendor=08ff, idProduct=2580
usb 6-1: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-1: Product: Fingerprint Sensor
usb 6-1: configuration #1 chosen from 1 choice
usb 7-2: new full speed USB device using uhci_hcd and address 2
usb 7-2: new device found, idVendor=03f0, idProduct=171d
usb 7-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: HP Integrated Module
usb 7-2: Manufacturer: Broadcom Corp
usb 7-2: configuration #1 chosen from 1 choice
usb 2-2: new low speed USB device using uhci_hcd and address 2
usb 2-2: new device found, idVendor=045e, idProduct=00e1
usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Microsoft Wireless Optical Mouse� 1.00
usb 2-2: Manufacturer: Microsoft
usb 2-2: configuration #1 chosen from 1 choice
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
scsi 3:0:0:0: Attached scsi generic sg2 type 5
ACPI: AC Adapter [ACAD] (on-line)
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
usbcore: registered new interface driver hiddev
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:08 failed with error -16
Linux video capture interface: v2.00
input: Microsoft Microsoft Wireless Optical Mouse� 1.00 as
/class/input/input3
input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse� 1.00]
on usb-0000:00:1a.1-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
ACPI: Battery Slot [BAT0] (battery present)
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input7
ACPI: Lid Switch [LID]
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:07:09.1 [1180:0822] (rev 22)
ACPI: PCI Interrupt 0000:07:09.1[B] -> GSI 21 (level, low) -> IRQ 21
mmc0: SDHCI at 0xf8100800 irq 21 DMA
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:06:00.0 to 64
eth0: RTL8168b/8111b at 0xffffc20000376000, 00:1b:24:96:b6:9e, IRQ 17
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
uvcvideo: Found UVC 1.00 device HP Webcam (064e:a101)
usbcore: registered new interface driver uvcvideo
USB Video Class driver (SVN r177)
iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.25
iwl4965: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
iwl4965: Detected Intel Wireless WiFi Link 4965AGN
wmaster0: Selected rate control algorithm 'iwl-4965-rs'
nvidia: module license 'NVIDIA' taints kernel.
dib0700: loaded with support for 6 different device-types
dvb-usb: found a 'Yuan EC372S' in cold state, will try to load a firmware
ACPI: PCI interrupt for device 0000:02:00.0 disabled
ACPI: PCI Interrupt 0000:07:09.0[A] -> GSI 20 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[f8100000-f81007ff]
Max Packet=[2048] IR/IT contexts=[4/4]
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.09 Fri Jan 11 14:04:37 PST
2008
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
dib0700: firmware started successfully.
dvb-usb: found a 'Yuan EC372S' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Yuan EC372S)
DVB: registering frontend 0 (DiBcom 7000PC)...
MT2266: successfully identified
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b004ebd5400]
dvb-usb: Yuan EC372S successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700
Adding 1959888k swap on /dev/sda6. Priority:-1 extents:1 across:1959888k
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
dm-devel@redhat.com
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.8)
AppArmor: AppArmor initialized
audit(1202285889.681:2): type=1505 info="AppArmor initialized" pid=2424
saa7146_vv: Unknown symbol videobuf_streamoff
saa7146_vv: Unknown symbol videobuf_poll_stream
saa7146_vv: Unknown symbol videobuf_read_stop
saa7146_vv: Unknown symbol videobuf_dma_free
saa7146_vv: Unknown symbol videobuf_reqbufs
saa7146_vv: Unknown symbol videobuf_waiton
saa7146_vv: Unknown symbol videobuf_dqbuf
saa7146_vv: Unknown symbol videobuf_queue_init
saa7146_vv: Unknown symbol videobuf_dma_unmap
saa7146_vv: Unknown symbol videobuf_read_stream
saa7146_vv: Unknown symbol videobuf_querybuf
saa7146_vv: Unknown symbol videobuf_qbuf
saa7146_vv: Unknown symbol videobuf_read_one
saa7146_vv: Unknown symbol videobuf_iolock
saa7146_vv: Unknown symbol videobuf_streamon
saa7146_vv: Unknown symbol videobuf_queue_cancel
saa7146_vv: Unknown symbol videobuf_mmap_setup
saa7146_vv: Unknown symbol videobuf_mmap_mapper
dvb_ttpci: Unknown symbol saa7146_vv_init
dvb_ttpci: Unknown symbol saa7146_vv_release
dvb_ttpci: Unknown symbol saa7146_start_preview
dvb_ttpci: Unknown symbol saa7146_unregister_device
dvb_ttpci: Unknown symbol saa7146_register_device
dvb_ttpci: disagrees about version of symbol dvb_frontend_detach
dvb_ttpci: Unknown symbol dvb_frontend_detach
dvb_ttpci: Unknown symbol saa7146_set_hps_source_and_sync
dvb_ttpci: Unknown symbol saa7146_stop_preview
dvb_ttpci: disagrees about version of symbol dvb_unregister_frontend
dvb_ttpci: Unknown symbol dvb_unregister_frontend
dvb_ttpci: disagrees about version of symbol dvb_register_frontend
dvb_ttpci: Unknown symbol dvb_register_frontend
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
r8169: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100102,
writing 40100106)
iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
ADDRCONF(NETDEV_UP): wlan0: link is not ready
audit(1202282307.849:3): audit_pid=3575 old=0 by auid=4294967295
NET: Registered protocol family 23
IrCOMM protocol (Dag Brattli)
IA-32 Microcode Update Driver: v1.14a