https://bugzilla.novell.com/show_bug.cgi?id=377575
User jsmeix@novell.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=377575#c33
--- Comment #33 from Johannes Meixner 2008-09-12 01:06:59 MDT ---
If you like to test the new stuff now:
I provide for testing HPLIP version 2.8.7
(packages hplip-2.8.7 and hplip-hpijs-2.8.7)
for openSUSE 10.2, openSUSE 10.3, openSUSE 11.0
and for the openSUSE development version "FACTORY"
for 32-bit Intel compatible (i586) and 64-bit AMD (x86_64)
via the openSUSE build service at
http://download.opensuse.org/repositories/home:/jsmeix/
In particular for openSUSE 11.0 for 32-bit Intel compatible
computers it is available at
http://download.opensuse.org/repositories/home:/jsmeix/openSUSE_11.0/i586/
The packages are
* only for testing
* without any guarantee or warranty
* without any support
As an extreme example, this means that if your complete computer
center crashes because of these packages, it is only your problem.
On the other hand this does not mean that those packages are
known to be terrible broken but they are not thoroughly
tested so that any unexpected issue can happen.
For example I did only a quick test with a HP LaserJet 1220
all-in-one device on a 32-bit workstation with openSUSE 11.0
so that whatever mess might happen otherwise.
Do not use FACTORY if your system is 10.2 10.3 or 11.0.
Use the matching package for your particular system.
FACTORY is not better, it is worse when you have
openSUSE 10.2 10.3 or 11.0. Using whatever packages
from FACTORY in a openSUSE 10.2 10.3 or 11.0 system
causes crashes in arbitrary cases because you would also
need the base system from FACTORY. You can easily mess up
your openSUSE 10.2 10.3 or 11.0 system with FACTORY updates.
In case of problems the RPM changelog via
rpm -q --changelog hplip
might provide hints which change cause an issue
in particular on older systems (openSUSE 10.2 10.3).
The version number 2.8.7 is higher than the version
of the original packages in openSUSE 10.2 10.3 or 11.0
so that you may have to remove installed hplip-2.8.7
and hplip-hpijs-2.8.7 packages manually using (as root)
rpm -e --nodeps hplip hplip-hpijs
before you could re-install the original packages
for openSUSE 10.2 10.3 or 11.0.
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.