https://bugzilla.novell.com/show_bug.cgi?id=408536
User bernhard.bender@web.de added comment
https://bugzilla.novell.com/show_bug.cgi?id=408536#c1
--- Comment #1 from Bernhard Bender 2008-07-11 14:00:25 MDT ---
Additional info:
The following output is generated by running "umtsmon -v 3":
umtsmon version 0.8.90-20080603 .
##P1 t=816: setVerbosity: '3'
##P2 t=816: set verbosity level to 3
##P2 t=816: set PPP verbosity level to 1
##P3 t=816: TheDeviceManagerSingleton::setupDevice(void)
##P3 t=816: TheDeviceManagerSingleton::readFromConfigFile()
##P2 t=816: Settings will be saved in : '/home/ber/.umtsmon'
##P1 t=816: Stored device configuration incomplete, reverting to autodetection
##P3 t=816: Start iterating through all AutoDetectors
##P2 t=816: Force Autodetection enabled - skipping device instantiation from
supplied values
##P3 t=816: Let's continue with the next AutoDetector
##P3 t=816: AutoDetectBase::go() for 'USB ZeroCD Autodetection'
##P3 t=816: AutoDetect_USB::traverseTrees()
##P3 t=817: AutoDetect_USB::matchIDs(0x1d6b, 0x0002)
##P3 t=817: AutoDetect_USB::matchIDs(0x1d6b, 0x0002)
##P3 t=817: AutoDetect_USB::matchIDs(0x03f0, 0x1e1d)
##P3 t=817: AutoDetect_USB::matchIDs(0x1d6b, 0x0001)
##P3 t=817: AutoDetect_USB::matchIDs(0x1d6b, 0x0001)
##P3 t=817: AutoDetect_USB::matchIDs(0x08ff, 0x2580)
##P3 t=817: AutoDetect_USB::matchIDs(0x1d6b, 0x0001)
##P3 t=817: AutoDetect_USB::matchIDs(0x03f0, 0x171d)
##P3 t=817: AutoDetect_USB::matchIDs(0x1d6b, 0x0001)
##P3 t=817: AutoDetect_USB::matchIDs(0x046d, 0xc03e)
##P3 t=817: AutoDetect_USB::matchIDs(0x1d6b, 0x0001)
##P2 t=817: BAD: 'No USB-based device found'
##P3 t=817: Let's continue with the next AutoDetector
##P3 t=817: AutoDetectBase::go() for 'USB Autodetection'
##P3 t=817: AutoDetect_USB::traverseTrees()
##P3 t=817: AutoDetect_USB::matchIDs(0x1d6b, 0x0002)
##P3 t=817: AutoDetect_USB::matchIDs(0x1d6b, 0x0002)
##P3 t=817: AutoDetect_USB::matchIDs(0x03f0, 0x1e1d)
##P2 t=817: GOOD: 'A 'HP HS2300 / MC8775 or AC875U' modem detected'
##P3 t=817: AutoDetect_USB::findPortNames()
##P3 t=817: INFO: 'There are 3 USB Serial ports available'
##P3 t=817: set AT serial to '/dev/ttyUSB2'
##P3 t=817: set PPP serial to '/dev/ttyUSB0'
##P3 t=817: AutoDetectBase::createDevice() for Device 51322402
##P3 t=817: Device creation for type 0x51322402 requested
##P2 t=817: Profile::Profile('')
##P2 t=817: finally created profile for 'Default'
##P3 t=817: Device: probing port '/dev/ttyUSB0' for AT commands
##P3 t=817: TempSerialPort::TempSerialPort()
##P3 t=817: Opened '/dev/ttyUSB0' as FD 10
##P3 t=817: SerialPort::closeDev() for FD 10
Could not write to serial device: Resource temporarily unavailable
##P1 t=817: *** CRITICAL ERROR: Could not write to device (anymore)
*** umtsmon version 0.8.90-20080603 closed due to an unrecoverable program
error.
*** Please e-mail all of the above output to
umtsmon-develop@lists.sourceforge.net,
*** Or go to the umtsmon website and file a bug.
##P1 t=821: Critical Popup - application will halt
Mutex destroy failure: Device or resource busy
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.