From here everything has to be done by hand:
After logging in by SSH, you can start yast. Now yast should get the
autoinst.xml from the selected source in parmfile, but yast doesn't. The is
no action over the network to get this file, verified by ethereal. There
are no Firewall problems because of using private network and already
working FTP download. Before starting yast, you can also connect and get
Hi !
Thank you very much for your mail !
I will try to use the DASD_Parameters=dasd=xxx now. Maybe this helps.
I will post it on the list then.
According to SuSE-Documentation (max. 10 lines) my parmfile has 9 lines
with a maximum of 77 characters each line.
Greetings
Stefan
Mit freundlichen Grüßen / Best regards
Stefan Leippert
Praktikant
eServer Software System Evaluation and Test
IBM Deutschland Entwicklung GmbH
Schoenaicher Strasse 220
D-71032 Boeblingen
"Smith, Terrance
T"
Stefan Leippert/Germany/IBM@IBMDE,
06/22/2005 04:41 cc
PM
Subject
RE: [suse-autoinstall] autoinstall
on s/390
Hi Stefan,
I'm having other problems like getting it to properly format my dasd
Anyway, I know that you can set autoyast to http but I don't believe that
the parmfile allows for you to set install to http.
Try setting install to nfs, ftp, as the install protocol
The INST_INFO paramter doesn't allow for http and I am deducing that
if you can't set INST_INFO to http then you can't set install to http.
Regards Terrance Smith
zVM / Linux CTI
201-601-7057
-----Original Message-----
From: Stefan Leippert [mailto:LEIPPERT@de.ibm.com]
Sent: Wednesday, June 22, 2005 9:31 AM
To: suse-autoinstall@suse.com
Subject: [suse-autoinstall] autoinstall on s/390
Hello !
We still have some problems with autoinstallation on our s/390(x)-machines
on LPAR:
We already have:
- start up the machine with the first ramdisk and a modified parmfile. The
parmfile contains information like this:
ramdisk_size=65536 root=/dev/ram1 ro init=/linuxrc TERM=dumb
AUTOINSTALL=yes
INST_PASSWORD=xxx IP_HOST=(ownHOSTNAME) IP_ADDR=(ownIP) IP_MTU=1492
IP_INTERFACE=qeth IP_NETMASK=255.255.0.0 IP_GATEWAY=xxx
IP_BROADCAST=xxx READ_DEVNO=f618 WRITE_DEVNO=f619 DATA_DEVNO=f61a
PORTNAME=OSAPORT INST_INFO=ftp FTPUSER=xxx FTPPASSWORD=xxx
INST_IP_ADDR=(IPftpSERVER) INST_SCREEN=SSH IP_DEV=eth0
INST_IP_DIR=SLES-9-s390/SUSE-SLES-Version-9/CD1
autoyast=http://(whereTHEautoinstfileIS)/autoinst.xml
install=http://xxx/SUSE-SLES-Version-9/CD1
During the first boot with this parmfile, The machine gets some files by
FTP (content, /boot/root, media.l/info.txt, part.info (which is not
available),
control.xml, driverupdate (which is also not available), products, media,
packages, packages.en, packages.en_us, Base-System.sel .....)
Now the machine boots with this ramdisk and starts up with an SSH-Server
(depending on selection in parmfile) and is reachable in the network. All
this worked automatically.
the autoinst.xml manually.
Yast now askes for alle parameters like DASDs, Package selection, language,
partiton...
Under installation as VM-guest it works with the same parmfile and the
machine gets the autoinst.xml.
We already tried a http-source for the autoinst.xml-file, but without
success.
We cannot use a cdrom or floopy to boot the lpar because we are working via
HMC on the machine and only the service element has a floopy or cdrom. We
use installservers.
Anybody has an idea / hint on how to make the machine getting the
autoinst.xml ?
Thank you in advance !
Stefan
Mit freundlichen Grüßen / Best regards
Stefan Leippert
Praktikant
eServer Software System Evaluation and Test
--
To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com
For additional commands, e-mail: suse-autoinstall-help@suse.com