Hi Guillaume,
Is your rootfs on mmc ?
Everything is on mmc. To copy the image to the mmc card I used the same command with any image I tried. xzcat openSUSE-...-ARM-JeOS-socfpgade0nanosoc.armv7l....raw.xz | dd bs=4M of=/dev/mmcblk0 iflag=fullblock oflag=direct; sync
Do you have multiple mmc devices maybe?
The DE0-Nano-SoC has only one micro SD card socket. => mmc list dwmmc0@ff704000: 0 (SD) (Using the Leap 15.1 image)
You can also list files from the partitions 1/2/3 from mmc0 device, with:
This is not working. (1) => ls mmc 0:1 ** Unrecognized filesystem type ** => ls mmc 0:2 ** Invalid partition 2 ** => ls mmc 0:3 ** Invalid partition 3 ** (Using the Leap 15.1 image)
You may try latest openSUSE Tumbleweed image since u-boot has been updated to version 2020.04 and lots of fpga patches landed in this version.
No reaction at all, like with the previous Tumbleweed and Leap 15.2. This is the list of images I tried and the result Leap 15.0 | 2018.07.02-Buildlp150.1.1 | booting (1) Leap 15.1 | 2019.05.17-Snapshot1.105 | ends up at the u-boot prompt (2) Leap 15.2 | 2020.02.26-Build1.63 | no reaction at all (3) Tumbleweed | 2020.03.25-Snapshot20200414 | no reaction at all (3) Tumbleweed | 2020.03.25-Snapshot20200421 | no reaction at all (3) (1) Leap 15.0 is booting normally. I get a console and can connect via ssh. Only downside is that I cannot see any USB device from linux after boot. (2) It is booting, but stops at the u-boot prompt. (3) There is not the slightest reaction from the board. I also cannot connect vie console. Thanks, Christian -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org