On 07.11.2013, at 11:14, Guillaume Gardet
Hi,
here are some tests results of 13.1 images. Results are pretty bad ATM. :(
* Beagleboard xM rev B : - Image fails to boot with the following error message: ******************************************************************************** [ 8.109588] Freeing unused kernel memory: 532K (c07e5000 - c086a000) setterm: cannot (un)set powersave mode: Inappropriate ioctl for device /usr/sbin/klogconsole Thu Nov 7 00:00:00 UTC 2013 [ 13.670684] ehci-omap ehci-omap.0: Can't get PHY device for port 1: -6 [ 15.271728] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? [437097081.923981] Including oem partition info file [437097082.043030] Searching for boot device... [ 16.471771] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 17.671752] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 18.925598] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 18.933227] hub 1-0:1.0: unable to enumerate USB device on port 1 [437097110.607544] Failed to find boot device ! [437097110.639527] rebootException: reboot in 120 sec... ********************************************************************************
The USB problem seems to be known: http://www.spinics.net/lists/linux-omap/msg90670.html Is boot problem related? I do not know.
D6 and D7 lights (related to MMC) are turned OFF when kernel start whereas it was ON with u-boot. So, MMC seems to be not working at all. It seems that kernel modules (at least omap mmc modules) from initrd are not loaded. Very strange.
If you boot with kiwidebug=1 you should be able to get a shell and check whether the modules are loaded or not.
* Pandaboard rev A3 : - Image hangs early with the following message: (Tested with 2 SD cards). ******************************************************************************** U-Boot SPL 2013.04 (Oct 21 2013 - 22:37:21) OMAP4430 ES2.2 OMAP SD/MMC: 0 ********************************************************************************
Is there anyone who could test those images on their baords, especially pandaboard?
Andrew reported the same issue. Could you please try with 12.3's SPL (MLO) and/or u-boot.bin to boil down which component is at fault here? Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org