March 2005 - openSUSE AMD64 - openSUSE Mailing Lists

AW: [suse-amd64] mjpegtools
by Graf, Markus 17 Mar '05

17 Mar '05

Hi Mike the answer is : recompile with -fPIC put this option (-fPIC) in every Makefile of this project as a CFLAG . In german you find the docu http://www.pseudonym.org/schauen.html, than look for mjpeg on this page. CU Markus > -----Ursprüngliche Nachricht----- > Von: Michael Steinhauser [mailto:mistr.rot@web.de] > Gesendet am: Montag, 4. Oktober 2004 21:04 > An: Mike.Philipp(a)passau.netsurf.de > Cc: suse-amd64(a)suse.com > Betreff: Re: [suse-amd64] mjpegtools > > Mike Philipp wrote: > > >Hi All, > > > >could anyone compile and link mjpegtools-1.6.2 on the AMD! > >I've tried it for three days now, but it doesn't work. > >Does anybody has a src.rpm or an already compiled x86_64 > >(with mpeg2enc)??? > > > >Thanx in advance > > Mike > > > > > > > Hi, > I tried it too and asked at mjpeg-users list. > Here are the postings: > I tried to install mjpegtools 1.6.2 on Suse 9.1 x86_64. I ran > configure > with --enable-libsuffix=64 and got no errors. > When I typed make, the following error was reportet: > /snap > > lib/x86_64-suse-linux/3.3.3/crtendS.o > /usr/lib64/gcc-lib/x86_64-suse-linux/3.3.3/../../../../lib64/crtn.o > -Wl,-soname -Wl,libmplex2-1.6.so.0 -o .libs/libmplex2-1.6.so.0.2.2 > /usr/lib64/gcc-lib/x86_64-suse-linux/3.3.3/../../../../x86_64- > suse-linux/bin/ld: > ../utils/libmjpegutils.a(mjpeg_logging.o): relocation R_X86_64_32 can > not be used when making a shared object; recompile with -fPIC > ../utils/libmjpegutils.a: could not read symbols: Bad value > collect2: ld returned 1 exit status > make[2]: *** [libmplex2.la] Fehler 1 > make[2]: Leaving directory > `/SHARE/Linux/RPMS/SRC/mjpegtools-1.6.2/mplex' > make[1]: *** [all-recursive] Fehler 1 > make[1]: Leaving directory `/SHARE/Linux/RPMS/SRC/mjpegtools-1.6.2' > make: *** [all] Fehler 2 > > Can anyone help? > > the answer: > > Hi, > > On Fri, 2004-09-03 at 10:18, Michael Steinhauser wrote: > > >> I tried to install mjpegtools 1.6.2 on Suse 9.1 x86_64. > > > > > [..] > > >> ../utils/libmjpegutils.a(mjpeg_logging.o): relocation > R_X86_64_32 can > >> not be used when making a shared object; recompile with -fPIC > >> ../utils/libmjpegutils.a: could not read symbols: Bad value > > > > > > This should be corrected in CVS for some time already. > > Ronald > > So i downloaded the latest CVS-version, did a ./configure > --prefix=/usr --libdir=/usr/lib64 --enable-libsuffix=64 > --sysconfdir=/etc --with-x --x-includes=/usr/X11R6/include > --x-libraries=/usr/X11R6/lib64 --with-gnu-ld > --without-libquicktime --with-gtk-prefix=/opt/gnome and it > compiled with no errors. After a checkinstall, where i had to > change some settings (version was there to often) i had a > installable rpm. It installed without errors, but i did not > try it till now. > > > > > > > -- > Check the List-Unsubscribe header to unsubscribe > For additional commands, email: suse-amd64-help(a)suse.com > >

3 2

RE: [suse-amd64] Video Card
by Phil Betts 17 Mar '05

17 Mar '05

On Wednesday, March 16, 2005 8:10 PM, Brad Bourn wrote: > I agree with the pro-Nvidia posts. > > > Specifically, here was a list that B. Stia posted a while back. > > It is an EXCELLENT resource for you decision of which nVidia card to > get(hehehe ATI NOT an option). > > http://lists.suse.com/archive/suse-linux-e/2004-Dec/2762.html By all means, go with nVidia, but you might want to read this first... I had 3 generations of GeForce fry in exactly the same way within two years of purchase. (Actually the last one was a replacement under warranty for the second). No overclocking was involved with any of them. Three strikes and you're out nVidia! The last card to fry also shafted my monitor, because it started to send out spurious sync pulses while I was away from the PC. By the time I got back, the monitor had gone crazy and wouldn't sync to ANY card. I'm now with ATI, and found their proprietary driver easy to install (easier than nVidia as far as getting any Mesa libs out of sight). I also haven't had any lockups with the ATI drivers, which I quite often got with the nVidia drivers, especially when flipping between X and the console. Only time will tell if ATI is more reliable than nVidia. Just my 2 penn'orth, Phil ********************************************************************** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept by MIMEsweeper for the presence of computer viruses. www.mimesweeper.com **********************************************************************

1 0

SCSI Problem on Tyan S2882 Motherboard
by A N Saravanaraj 17 Mar '05

17 Mar '05

Hello Everybody, I have been running SuSe 9.1 pro (installed all latest updates) for AMD64 on my S2882 motherboard with two opteron processors for a long time (8-months) without any major problem. The system hard drive is an ide drive. I have a promise sx6000 external raid array attached to the on-board SCSI on chanel A and a VXA2 tape drive on chanel B. Last thursday night the machine ran into trouble with the scsi part. The scsi devices were not accessible and the kernel put out the following in the messages file. Feb 26 04:08:35 raid1lac kernel: scsi0: At time of recovery, card was not paused Feb 26 04:08:35 raid1lac kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< Feb 26 04:08:35 raid1lac kernel: scsi0: Dumping Card State at program address 0x11 Mode 0x33 Feb 26 04:08:35 raid1lac kernel: Card was paused Feb 26 04:08:35 raid1lac kernel: HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] Feb 26 04:08:35 raid1lac kernel: SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE) Feb 26 04:08:35 raid1lac kernel: SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0] Feb 26 04:08:35 raid1lac kernel: LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] Feb 26 04:08:35 raid1lac kernel: SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] Feb 26 04:08:35 raid1lac kernel: SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SEQ_FLAGS2[0x0] Feb 26 04:08:35 raid1lac kernel: SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] Feb 26 04:08:35 raid1lac kernel: PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) Feb 26 04:08:35 raid1lac kernel: LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] Feb 26 04:08:35 raid1lac kernel: LQOSTAT1[0x0] LQOSTAT2[0x0] .................. .............. ........ The system works fine after I reboot the computer and the raid array. I am not sure wether the scsi card is going bad or is it the raid array going bad. Could anybody tell me what is exactly happening here or how I should go about figuring our what has went bad. Thank You -Raj

2 1

32 or 64 that is the question.
by Vincent Yonemitsu 17 Mar '05

17 Mar '05

Here is the scenario. I currently have a dual opteron 248 system. It is dedicated to run SLOX. When The Netline verion 5 comes out we will be migrgating to redhat 4. I know not suse(my bosses wanted to send me on certification and the suse trraining is too hard to find) so redhat it is. Above my head. Now to move on. Sincec I would assume that OX 5 will only be made available as 32 bit do you think it would be better to run the os in 64 bit moded and run SLOX as a legacy 32 bit app or should I install the 32 bit OS? I don;t know what the installation is going to be lke but I would assume its going to be a big package and it install and configures everything so I doubt I would be able to install postfix...imap.... and so on as seperate 64 bit apps and tie them together. Vincent Yonemitsu Burlington Public Library Information Technology Department Ph: (905)639-3611 ext 153 Fax: (905)681-7277 yonemitsuv(a)bpl.on.ca

1 0

Video Card
by Dirk Streubel 16 Mar '05

16 Mar '05

Hello, i'am looking for a new Video Card. And I don't know which one i can bye. So, the Price for the card should be 150 €, not more. Have anybody in the list an advice for me? And what about the new drivers for ATI or Nvidia Cards for x86_64 ? Are they easy to install ? Thanks a lot. Dirk

9 12

FireFox Fix
by tree 15 Mar '05

15 Mar '05

Hey all, Found the problem I was having with FireFox. (It crashed on certain w3c verified sites -- Old-Style-Mozilla crash, just disappeared.) I had installed a some miscellaneous fonts from a large font package. Turns out the "Times" font was rewritten by a buggy one. I removed the appropriate "times" entries from fonts.dir/fonts.scale and removed the offending font. Then, I reinstalled the normal SuSe fonts and voila -- things work great. So, if your FireFox is diving by zero and crashing nasty, you might try this. Regards, -- Jason -- Jason Vertrees BSCB Graduate Student @ UTMB, Galveston javertre(a)utmb.edu :: http://www.bscb.utmb.edu

1 0

squid: page allocation failure. order:1, mode:0x20
by Cristian Rodriguez 15 Mar '05

15 Mar '05

hi: Im getting "strange" errors on my log file like this: squid: page allocation failure. order:1, mode:0x20 Call Trace:<ffffffff80157ffc>{__alloc_pages+1068} <ffffffff801580a1>{__get_free_pages+33} <ffffffff8015b2db>{kmem_getpages+27} <ffffffff8015b5fe>{cache_alloc_refill+558} <ffffffff8015b713>{__kmalloc+83} <ffffffff802cb641>{pskb_expand_head+81} <ffffffff802cff08>{skb_checksum_help+88} <ffffffff802efa70>{ip_finish_output2+0} <ffffffffa016b833>{:iptable_nat:ip_nat_fn+99} <ffffffff802efa70>{ip_finish_output2+0} <ffffffffa016bb54>{:iptable_nat:ip_nat_out+212} <ffffffff802d837c>{nf_iterate+92} <ffffffff802efa70>{ip_finish_output2+0} <ffffffff802d9257>{nf_hook_slow+135} <ffffffff802efa70>{ip_finish_output2+0} <ffffffff802efe3b>{ip_finish_output+507} <ffffffff802ed5d0>{ip_dst_output+0} <ffffffff802effa8>{ip_output+200} <ffffffff802ed608>{ip_dst_output+56} <ffffffff802d9293>{nf_hook_slow+195} <ffffffff802ed5d0>{ip_dst_output+0} <ffffffff802ef6e3>{ip_queue_xmit+1203} <ffffffff80157d0d>{__alloc_pages+317} <ffffffff802fe3c4>{tcp_transmit_skb+1972} <ffffffff802ff769>{tcp_write_xmit+233} <ffffffff802f52e8>{tcp_sendmsg+3752} <ffffffff802f4323>{tcp_recvmsg+1779} <ffffffff80312d56>{inet_sendmsg+86} <ffffffff802c74b7>{sock_aio_write+343} <ffffffff8017041d>{do_sync_write+173} <ffffffff80133950>{autoremove_wake_function+0} <ffffffff801826dc>{poll_freewait+76} <ffffffff80182a27>{sys_poll+823} <ffffffff80170556>{vfs_write+262} <ffffffff80170683>{sys_write+83} <ffffffff8011042e>{system_call+126} Im using SUSE 9.2 amd64 fully updated... Any ideas?

1 0

Athlon 64 revision E won't work on some Nforce 3/4 boards
by Janis Klava 14 Mar '05

14 Mar '05

Athlon 64 revision E won't work on some Nforce 3/4 boards CeBIT 2005 Ouch AMD By Fuad Abazovic in Hannover: Saturday 12 March 2005, 19:27 PROBLEMS APPEAR to be affecting Athlon 64 revision E chips on some Nforce 3 and Nforce 4 motherboards. Symptoms include motherboard shut down and failure to boot, according to reports here from CeBIT. Revision E chips from AMD are just released and brings stuff like SSE3 support inside a 90 nanometre die. AMD on the other hand didn't make a big noise about its announcement. We learned that if you have this Athlon and already have Nforce 3 or Nforce 4 board that there is a big chance that you may encounter problems. We are told that AMD changed its thermal regulation protection and that's what makes it incompatible with at least some of the Nforce 3 and Nforce 4 boards out there. http://www.theinquirer.net/?article=21780

1 0

RE: [suse-amd64] XEN for AMD64
by Langsdorf, Mark 14 Mar '05

14 Mar '05

> Does anyone know if the XEN, which will come with 9.3, will > also work with the 64bit kernels? Xen does not support AMD64 yet. Work is being done to provide that support but I do not know if it will be complete in time for SUSE 9.3. -Mark Langsdorf AMD, Inc.

1 0

Re: [suse amd64] clamav 0.83-1.2x86_64.rpm, SuSe 9.2 and Libcurl.so.2
by melissad 14 Mar '05

14 Mar '05

This is well over my OS technical depth, not the first time have had this msg, and have never gotten it fixed. Distro is SuSE 9.2 64-bit. Installed clamav-0.83 from rpm commandline and received failed dependency message error: Failed dependencies: libcurl.so.2()(64bit) is needed by clamav-0.83-1.2 I looked through the installation DVD and found no file of this name. clamav 0.82 installed, either without calling out the dependency or --- what?? Any assistance would be welcomed. melissa

4 3

Hardware, RAM, databus
by Colin Carter 13 Mar '05

13 Mar '05

Greetings, What I really need to know is how modern 64 bit memory is addressed. I already understand that if I have a pointer, ptr, which points to an array of some structure then ptr++ will point to the next element. That is, Ptr++ increments in a multiple of bytes. But that is all done in software. I want to optimise my software to match what happens in hardware. If I have a pointer pointing to address 256 and then look at address 257, by how many BYTES have I jumped in physical memory? In old style memory of 16 bit words it would jump one word, that is 4 BYTES, but in a machine with 8 bit words it would jump one word of 2 BYTES. That is, always one machine word. Also, if your machine was up to date, it always had the matching data bus to access a full word (machine word, not a Bill Gates 'word') in one take. That is, a 16 bit machine had a 16 bit databus. Cheap machines, with a cheap data-bus, would take two mouths full. An equivalent question would be: If I have a string, Str(16), of bytes Str(0) to Str(15) containing "ABCDEFGHIJKLMNOn" (n=NUL) in a 32 bit machine, does the request for Str(9) ie "J" electronically load this character directly into the least significant byte of the register, (doubt it) or, by assembler code (generated by the compiler) do the following: Load the characters "IJKL" into the register, shift right, ("00IJ") and mask ("oooJ") ? That is: does the electronic system access one byte directly? or perhaps the load/shift/mask is done in hardware? (doubt it) For me the important issue is, for a 64 bit machine: I suspect that access to IntArray(23) is faster if defined as int64_t IntArray(128) ie as 64 bit words with the top bits generally being zero than if defined as int32_t IntArray(128) ie as 32 bit words because, for a 64 bit machine, the latter will store two values into each physical address. (I must experiment with int_fast32_t ) (In a 32 bit machine everybody knows that it requires two bites of the cherry to get a 64 bit integer or float value.) The significance of this last question would be that there may be no value in having data 'nn byte aligned'. Finally, I am aware that modern machines have a cache. When I ask for the value of K, as in M = N + K, does the machine load a whole page to get N and another page to get K? If these are int32_t does the memory do a 32 bit pulse/read of one address? Or perhaps a 64 bit pulse/read and mask? or repeated reads for a whole page? Does the AMD64 have a 32 bit databus or a 64 bit databus? Thanks to any hardware boffins, Colin

1 0

XEN for AMD64
by Arjen Runsink 12 Mar '05

12 Mar '05

Hi, Does anyone know if the XEN, which will come with 9.3, will also work with the 64bit kernels? BB, Arjen

2 1

Re: [suse-amd64] Suse 9.3 - which kernel and gcc ?
by Andreas Jaeger 12 Mar '05

12 Mar '05

"Joel Wiramu Pauling" <aenertia(a)aenertia.net> writes: > Are the gnome 2.10 rpm's available somewhere now? Not done yet, I'll talk to the guys later. > I've been hanging out for 2.10 rpm's for amd64 for a while... It would > be nice to make these available through an apt repository or YOU update > for all the 9.2 folks in strange parts of the World (i.e NZ) whom will > have to get a Quazi legal version of 9.3 dvd because it takes months to > get here, and by that time it's out of date. Andreas P.S.: I shipped the first 9.2 version myself last November to NZ. -- Andreas Jaeger, aj(a)suse.de, http://www.suse.de/~aj SUSE Linux Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 A126

1 0

Re: [suse-amd64] swap partition size?
by James Parra 12 Mar '05

12 Mar '05

> Hi James, > > Thanks for the reply. > > Is your entire 16GB swap in one partition or file? I was trying to find > out if 2GB was the max for each swap partition. > > eugene It is a 16 Gb partition, however a swapfile would work as well. ~James

2 1

RE: [suse-amd64] swap partition size?
by James D. Parra 12 Mar '05

12 Mar '05

>I can't find a definitive answer to this, so I'll ask here. >I have a dual Opteron server running SLES 8/64. It has 4 GB of RAM. >What is the largest swap partition that Linux supports? I understand the >performance benefits of creating multiple partitions on multiple disks, >but what is the biggest swap partition that Linux will allow or can use? >Would it be different between SLES8/64 vs SLES 8/32? Most of the >documentation I've found seem to suggest that 2GB is the maximum for >each swap partition or file. We have a similar setup. Dual Opterons with eight gigs of ram. The swap is 16gb. We have no problems. Tasks: 87 total, 1 running, 86 sleeping, 0 stopped, 0 zombie Cpu0 : 0.0% us, 0.3% sy, 0.0% ni, 99.7% id, 0.0% wa, 0.0% hi, 0.0% si Cpu1 : 0.0% us, 0.3% sy, 0.0% ni, 99.7% id, 0.0% wa, 0.0% hi, 0.0% si Mem: 8119576k total, 8080928k used, 38648k free, 31024k buffers Swap: 16777648k total, 456k used, 16777192k free, 7567684k cached ~James

1 0

swap partition size?
by chu＠tes-mail.jpl.nasa.gov 12 Mar '05

12 Mar '05

Hi List, I can't find a definitive answer to this, so I'll ask here. I have a dual Opteron server running SLES 8/64. It has 4 GB of RAM. What is the largest swap partition that Linux supports? I understand the performance benefits of creating multiple partitions on multiple disks, but what is the biggest swap partition that Linux will allow or can use? Would it be different between SLES8/64 vs SLES 8/32? Most of the documentation I've found seem to suggest that 2GB is the maximum for each swap partition or file. thanks for any information on this. eyc

1 0

Suse 9.3 - which kernel and gcc ?
by Kevin_Gassiot＠veritasdgc.com 12 Mar '05

12 Mar '05

Saw the announcment about the imminent release of Suse 9.3 using the 2.6.11 kernel. Can you tell me which version of gcc will be packaged with this release ? I am looking for gcc 3.4.3 ( I know I can download and build it, I am just curious about what will be packaged :) What is the official release date for this ? Thanks, Kevin Kevin Gassiot Advanced Systems Group Visualization Systems Support Veritas DGC 10300 Town Park Dr. Houston, Texas 77072 832-351-8978 kevin_gassiot(a)veritasdgc.com

7 10

Install hangs
by Ivan Popivanov 11 Mar '05

11 Mar '05

Hi, AMD64, Gigabyte GA-K8NF motherboard, ATI x700 on PCI Express. The 64 bit install hangs when it tries to switch to graphic mode. Changing the resolution doesn't help. If I install in text mode there are no problems with the install, however,. I couldn't install the graphics driver from ATI after the install - similar problem as with the install. sax2 does not show any windows, just a white rectangle where the window is supposed to be. On the same machine the 32 bit install run smoothly in graphic mode and after that following the instructions to install the ATI drivers worked as well. Obviously it's a problem with the 64 bit setup. Is there a fix for that? If there is no fix, I can help debugging the problem on my machine, really want to get the 64 bit SUSE running ;-) Thanks in advance! Ivan

1 0

What is this
by David 11 Mar '05

11 Mar '05

I have been trying to build the xmms from src.rpm. I am getting this result. error: Failed build dependencies: texinfo is needed by xmms-1.2.10-56.1 I have search the SuSE rpm's and descriptions and have not found any reference to this. This is only my second installtion of SuSE and I have not seen this before. David

4 6

HOWTO merge PatchCD and remote install files
by Ron Lau 11 Mar '05

11 Mar '05

HELP! I need the patch CD to install 9.2 on an AMD with sata, but I don't have a DVD drive so I need to use my NFS server. How do I merge the patchCD with the 9.2 install files so that I can install from the nfs server and use the PatchCD kernel? -- R.

2 3

Perl module Crypt::Rijndael
by Bastian Friedrich 11 Mar '05

11 Mar '05

Hi, I've just recently upgraded to a new 64bit machine. One of the last pitfalls I found was the installation of a perl program called "perl-strip" (which can display the contents of a synced file from a certain PalmOS program). This program uses the perl module Crypt::Rijndael. I was unsuccessful to install this module properly; "make"ing it works, but "make test" fails with "Failed 20/41 tests". I suppose this is the reason my "perl-strip" program does not work. Can anyone confirm Crypt::Rijndael does not install properly? Any suggestions on how to get it running again? Thx & regards, Bastian -- Bastian Friedrich bastian(a)bastian-friedrich.de Adress & Fon available on my HP http://www.bastian-friedrich.de/ \~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\ \ STICK: A boomerang that doesn't work.

1 0

USB ports not active
by ken 10 Mar '05

10 Mar '05

I've installed SuSE 9.2 on my AMD64 Compaq Presario R3000 notebook and my USB ports are not active. I plug in a mouse and its not recognized. I plug in my printer (an EPSON C-80), which works fine under my SuSE 9.1 on my desktop machine, and its not found when I search for it through YaST. They just don't seem to be active at all. I have three ports and they all seem to be detected by the YaST hardware detector. When I first got the laptop it had Windows XP on it of course and I booted into it first just to make sure that the computer was working in case it got broke in shipping or something. I, of course, immediately then installed SuSE on it. Unfortunately, I did not test the USB ports when in Windows, so I have no idea if they worked there or not and Compaq of course won't support me on this issue unless I have freakin' Windows installed. Any help would be appreciated because I've exhausted everything I know now. If I can't get this fixed I'm going to have to wipe my SuSE, install Windows, see if the ports work. If so, then switch to another distro and see if they work there. Thanks a bunch, Ken

5 6

Re: Re: [suse-amd64] QI I-Stick 2.0 1GB USB 2.0 Flash Drive
by Arne 10 Mar '05

10 Mar '05

Hello again One way of doing it is as follows: *Plug in the USB stick *Make sure it is shown in suseplugger (the circuit board icon in kde-panel). It should be under the "Disk" header. If it's not pull out the USB stick and plug it in again. Why it sometimes not work the first (or the secound or third) time I don't know. *Select the USB stick and press the adjust (or whatever it is called in english) button. Now the YaST partition program starts and you can delete your existing partition and create a new one. You shouldn't assign a mount point for the new partition. I don't know if automount works with other partitions than FAT32 but as you probably will move the USB stick between different computers and systems FAT32 is best for compability. (... Using MS teknology for best compability, it sounds like a contradiction ;-) M.v.h /Arne (with 'n' :-) On 10.3 2005 17:32, Anirban Biswas wrote: > >Hi Arme > > Yeah I have the same problem KDE not auto mounting the USB stick. >So I have to repartition it in FAT32. How to do that. Also is it >possible to format in other format like EXT3 or RaiserFS > >TIA > >Anirban > > >On Thu, 10 Mar 2005 12:13:32 +0200, Arne <ComradeTux(a)surfnet.nu> wrote: >> Hi >> What kind of problem ?!! >> I had problem with SuSE not automounting my Sandisk Cruzer USB Stick. The >problem was solved by deleting the original partition (FAT16 I think) and >creating a >> FAT32 partition. Maybe it's the same for QI >> >> /Arne >> >> >> On 9.3 2005 22:19, Anirban Biswas wrote: >> >> > >> >Hi >> > Does any body have probelm using QI I-Stick 2.0 1GB USB 2.0 >> >Flash Drive on Linux. >> > >> >Anirban >> >-- >> >A commune is where people join together to share their lack of wealth. >> >-- R. Stallman >> > >> >-- >> >Check the List-Unsubscribe header to unsubscribe >> >For additional commands, email: suse-amd64-help(a)suse.com >> > >> > >> >> ------------------------------------------------------------------ >> Gratis svenskpråkig e-post och förmånliga textmeddelanden >> http://webmail.surfnet.fi >> ------------------------------------------------------------------ >> >> >> -- >> Check the List-Unsubscribe header to unsubscribe >> For additional commands, email: suse-amd64-help(a)suse.com >> >> > > >-- >A commune is where people join together to share their lack of wealth. >-- R. Stallman > ------------------------------------------------------------------ Gratis svenskpråkig e-post och förmånliga textmeddelanden http://webmail.surfnet.fi ------------------------------------------------------------------

1 0

Re: Re: [suse-amd64] Firefox - plugins
by Arne 10 Mar '05

10 Mar '05

This Helix build instructions might be of help, I haven't tried them myself though http://crashrecovery.org/helixp/README.txt /Arne On 8.3 2005 08:56, Joel Wiramu Pauling wrote: > >java should work fine aslong as you are using a 64bit native version >(have a look for blackdown linux java)... > > >Realplayer... well it's possible you could compile helix player from >source and it would work. Real Player 10 is 32bit tho which will mean >it's plugin will not work... > >Kind regards > > >Joel W > >---------------------------------------------------------------------- >Date: Mon, 7 Mar 2005 01:45:40 -0600 >From: arun r <arun.raj(a)gmail.com> >To: suse-amd64(a)suse.com >Subject: [suse-amd64] Firefox - plugins > >hi all, > Is there a way to have Java and Realplayer plugins work >with 64-bit Firefox on Suse 9.2 for AMD64 machine ? > >Thanks >Arun > >-- >Check the List-Unsubscribe header to unsubscribe >For additional commands, email: suse-amd64-help(a)suse.com > > > > > >---------------------------------------------------------------------- > >-- >Check the List-Unsubscribe header to unsubscribe >For additional commands, email: suse-amd64-help(a)suse.com ------------------------------------------------------------------ Gratis svenskpråkig e-post och förmånliga textmeddelanden http://webmail.surfnet.fi ------------------------------------------------------------------

2 1

is there an operational flash/shockwave player?
by Joe Landman 10 Mar '05

10 Mar '05

Hi folks: I noticed that while firefox is itself a 64 bit binary, that the libflash and other bits for flash/shockwave are currently 32 bit binaries. [landman@balto:~] 122 >file /usr/lib/browser-plugins/libflashplayer.so /usr/lib/browser-plugins/libflashplayer.so: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), stripped I don't think that Mozilla has a built in thunking layer: are their firefox/mozilla plugins for 64 bit SuSE and linux in general to handle these? Or will I need to revert to a 32 bit compiled browser? Joe -- Joseph Landman, Ph.D Founder and CEO Scalable Informatics LLC, email: landman(a)scalableinformatics.com web : http://www.scalableinformatics.com phone: +1 734 786 8423 fax : +1 734 786 8452 cell : +1 734 612 4615

2 1