Mailinglist Archive: yast-commit (1271 mails)

< Previous Next >
[yast-commit] [ci_new_pac] JFYI yast2-cluster -> sle12
Script 'mail_helper' called by ro
Hello packager,

This is just FYI. Your package was checked in in distribution "sle12"
by autobuild-member: ro.

Here comes the log...

---------------------------%<------------------------------
Hi,

here is the log from ci_new_pac /mounts/work_src_done/SLE12/yast2-cluster ->
sle12



## BNC# 716109 : "More descriptive name for options to select between multicast
and unicast type" (ASSIGNED/)

Changes:
--------
--- /work/SRC/SUSE:SLE-12:GA/yast2-cluster/yast2-cluster.changes
2014-09-09 12:20:04.000000000 +0200
+++ /mounts/work_src_done/SLE12/yast2-cluster/yast2-cluster.changes
2014-09-19 09:37:51.000000000 +0200
@@ -1,0 +2,6 @@
+Fri Sep 19 07:28:14 UTC 2014 - nwang@xxxxxxxx
+
+- BNC#716109. Change UI udp to multicast, udpu to unicast.
+- Version 3.1.15
+
+-------------------------------------------------------------------

calling whatdependson for sle12-i586
Packages directly triggered for rebuild:
- yast2-cluster
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/SUSE:SLE-12:GA/yast2-cluster (Old)
and /mounts/work_src_done/SLE12/yast2-cluster (BS:build ID:44331
MAIL:yast-commit@xxxxxxxxxxxx) (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Package is "yast2-cluster", Maintainer is "yast-commit@xxxxxxxxxxxx"


Old:
----
yast2-cluster-3.1.14.tar.bz2

New:
----
yast2-cluster-3.1.15.tar.bz2

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Other differences:
------------------
++++++ yast2-cluster.spec ++++++
--- /var/tmp/diff_new_pack.PK5ykm/_old 2014-09-19 17:43:38.000000000 +0200
+++ /var/tmp/diff_new_pack.PK5ykm/_new 2014-09-19 17:43:38.000000000 +0200
@@ -18,7 +18,7 @@

Name: yast2-cluster
%define _fwdefdir /etc/sysconfig/SuSEfirewall2.d/services
-Version: 3.1.14
+Version: 3.1.15
Release: 0

BuildRoot: %{_tmppath}/%{name}-%{version}-build

++++++ yast2-cluster-3.1.14.tar.bz2 -> yast2-cluster-3.1.15.tar.bz2 ++++++
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/yast2-cluster-3.1.14/MAINTAINER
new/yast2-cluster-3.1.15/MAINTAINER
--- old/yast2-cluster-3.1.14/MAINTAINER 2014-09-09 05:04:55.000000000 +0200
+++ new/yast2-cluster-3.1.15/MAINTAINER 2014-09-19 09:36:15.000000000 +0200
@@ -1 +1 @@
-Nick Wang <nwang@xxxxxxxx>
+Deprecated file. Use `osc maintainer yast2-cluster` instead.
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/yast2-cluster-3.1.14/package/yast2-cluster.changes
new/yast2-cluster-3.1.15/package/yast2-cluster.changes
--- old/yast2-cluster-3.1.14/package/yast2-cluster.changes 2014-09-09
05:04:55.000000000 +0200
+++ new/yast2-cluster-3.1.15/package/yast2-cluster.changes 2014-09-19
09:36:15.000000000 +0200
@@ -1,4 +1,10 @@
-------------------------------------------------------------------
+Fri Sep 19 07:28:14 UTC 2014 - nwang@xxxxxxxx
+
+- BNC#716109. Change UI udp to multicast, udpu to unicast.
+- Version 3.1.15
+
+-------------------------------------------------------------------
Tue Sep 9 02:39:15 UTC 2014 - nwang@xxxxxxxx

- BNC#807780. Change word of UI from at booting to during boot.
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/yast2-cluster-3.1.14/package/yast2-cluster.spec
new/yast2-cluster-3.1.15/package/yast2-cluster.spec
--- old/yast2-cluster-3.1.14/package/yast2-cluster.spec 2014-09-09
05:04:55.000000000 +0200
+++ new/yast2-cluster-3.1.15/package/yast2-cluster.spec 2014-09-19
09:36:15.000000000 +0200
@@ -18,7 +18,7 @@

Name: yast2-cluster
%define _fwdefdir /etc/sysconfig/SuSEfirewall2.d/services
-Version: 3.1.14
+Version: 3.1.15
Release: 0

BuildRoot: %{_tmppath}/%{name}-%{version}-build
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/yast2-cluster-3.1.14/src/include/cluster/dialogs.rb
new/yast2-cluster-3.1.15/src/include/cluster/dialogs.rb
--- old/yast2-cluster-3.1.14/src/include/cluster/dialogs.rb 2014-09-09
05:04:55.000000000 +0200
+++ new/yast2-cluster-3.1.15/src/include/cluster/dialogs.rb 2014-09-19
09:36:15.000000000 +0200
@@ -437,7 +437,10 @@
Id(:transport),
Opt(:hstretch, :notify),
_("Transport:"),
- ["udp", "udpu"]
+ [
+ Item(Id("udp"),"Multicast"),
+ Item(Id("udpu"),"Unicast")
+ ]
)

iface = Frame(
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/yast2-cluster-3.1.14/src/include/cluster/helps.rb
new/yast2-cluster-3.1.15/src/include/cluster/helps.rb
--- old/yast2-cluster-3.1.14/src/include/cluster/helps.rb 2014-09-09
05:04:55.000000000 +0200
+++ new/yast2-cluster-3.1.15/src/include/cluster/helps.rb 2014-09-19
09:36:15.000000000 +0200
@@ -36,7 +36,7 @@
"<p><b><big>Bind Network Address</big></b><br>This specifies the
address which the openais executive should bind. This address should always
end in zero. If the totem traffic should be routed over 192.168.5.92,
set bindnetaddr to 192.168.5.0.<br>This may also be an IPV6 address, in which
case IPV6 networking will be used. In this case, the full address must be
specified and there is no automatic selection of the network interface
within a specific subnet as with IPv4. If IPv6 networking is used, the nodeid
field must be specified.<br></p>\n" +
"<p><b><big>Multicast Address</big></b><br>This is the multicast
address used by openais executive. The default should work for most
networks, but the network administrator should be queried about a multicast
address to use. Avoid 224.x.x.x because this is a \"config\" multicast
address.<br>This may also be an IPV6 multicast address, in which case IPV6
networking will be used. If IPv6 networking is used, the nodeid field must be
specified.</p>\n" +
"<p><b><big>Port</big></b><br>This specifies the UDP port
number. It is possible to use the same multicast address on a network with
the openais services configured for different UDP ports.<br></p>\n" +
- "<p><b><big>Member Address</big></b><br>This list specifies all
the nodes in the cluster by IP address. This could be configurable when using
udpu <br></p>\n" +
+ "<p><b><big>Member Address</big></b><br>This list specifies all
the nodes in the cluster by IP address. This could be configurable when using
udpu(Unicast). <br></p>\n" +
"<p><b><big>Node ID</big></b><br>This configuration option is
optional when using IPv4 and required when using IPv6. This is a 32 bit
value specifying the node identifier delivered to the cluster membership
service. If this is not specified with IPv4, the node id will be determined
from the 32 bit IP address the system to which the system is bound with
ring identifier of 0. The node identifier value of zero is reserved and
should not be used.<br></p>\n" +
"<p><b><big>rrp_mode</big></b><br>This specifies the mode of
redundant ring, which may be none, active, or passive. Active
replication offers slightly lower latency from transmit to delivery in faulty
network environments but with less performance. Passive replication may
nearly double the speed of the totem protocol if the protocol doesn't
become cpu bound. The final option is none, in which case only one network
interface will be used to operate the totem protocol. If only one interface
directive is specified, none is automatically chosen. If multiple interface
directives are specified, only active or passive may be chosen.<br></p>\n" +
"<p><b><big>Expected votes</big></b><br>Expect vote number for
voting quorum. Will be automatically calculated when the nodelist {} section
is present in corosync.conf or can be specified in the quorum {}
section.<br></p>\n" +

continue with "q"...


Checked in at Fri Sep 19 17:43:50 CEST 2014 by ro

Remember to have fun...

--
To unsubscribe, e-mail: yast-commit+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: yast-commit+help@xxxxxxxxxxxx

< Previous Next >
This Thread