Re: AW: [radeonhd] dual-head, second monitor connected to DVI port - wrong resolution selected

and add --crtc [0|1] so they are cot bound to the same resolution Mark Struberg schrieb:

I have a similar problem currently. But this happens only after I updated my Fedora 9 to use xorg-x11-server-Xorg-1.4.99.902-3.20080612.fc9.i386 recently. It worked fine with the /xorg-x11-server-Xorg-1.4.99.901-29.20080415.fc9.i386

I have an IBM T60 with native 1400x1050 and an external Dell WFP2007 VGA 1680x1050. After startup, my notebook display shows a scaled 1680x1050. I tried this with an old radeonhd version which I know it was working, but had the same problem. So I guess this has something todo with x11.

But you can fix most of the problems by manually invoking xrandr Try $> xrandr --auto

If this does not work out, try to set the --mode manually for each --output

LieGrü, strub

--- Vladimir Grebenschikov schrieb am Do, 19.6.2008:

...

Von: Vladimir Grebenschikov Betreff: [radeonhd] dual-head, second monitor connected to DVI port - wrong resolution selected An: "radeonhd" Datum: Donnerstag, 19. Juni 2008, 10:46 Hi

I have dual-head installation on FreeBSD-8-CURRENT with xorg-7.3_2, xf86-video-radeonhd-1.2.1_1 (from ports)

After X start everything is ok, but second screen is started in wrong mode 1280x1024 instead of native 1600x1200.

Part of Xorg.0.log:

... (II) RADEONHD(0): Supported VESA Video Modes: (II) RADEONHD(0): 720x400@70Hz (II) RADEONHD(0): 640x480@60Hz (II) RADEONHD(0): 640x480@67Hz (II) RADEONHD(0): 640x480@72Hz (II) RADEONHD(0): 640x480@75Hz (II) RADEONHD(0): 800x600@56Hz (II) RADEONHD(0): 800x600@60Hz (II) RADEONHD(0): 800x600@72Hz (II) RADEONHD(0): 800x600@75Hz (II) RADEONHD(0): 832x624@75Hz (II) RADEONHD(0): 1024x768@60Hz (II) RADEONHD(0): 1024x768@70Hz (II) RADEONHD(0): 1024x768@75Hz (II) RADEONHD(0): 1280x1024@75Hz (II) RADEONHD(0): 1152x870@75Hz (II) RADEONHD(0): Manufacturer's mask: 0 (II) RADEONHD(0): Supported Future Video Modes:

...

(II) RADEONHD(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 <--- best, and native mode for LCD panel (II) RADEONHD(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) RADEONHD(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) RADEONHD(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) RADEONHD(0): Supported additional Video Mode: (II) RADEONHD(0): clock: 162.0 MHz Image Size: 408 x 306 mm (II) RADEONHD(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0 (II) RADEONHD(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0 (II) RADEONHD(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 170 MHz (II) RADEONHD(0): Monitor name: SyncMaster (II) RADEONHD(0): Serial No: HS1PB04328 (II) RADEONHD(0): EDID (in hex): (II) RADEONHD(0): 00ffffffffffff004c2dae0130325242 (II) RADEONHD(0): 3011010380291f782aee95a3544c9926 (II) RADEONHD(0): 0f5054bfef80a94081808140714f0101 (II) RADEONHD(0): 010101010101483f403062b0324040c0 (II) RADEONHD(0): 130098321100001e000000fd00384b1e (II) RADEONHD(0): 5111000a202020202020000000fc0053 (II) RADEONHD(0): 796e634d61737465720a2020000000ff (II) RADEONHD(0): 00485331504230343332380a20200018 (II) RADEONHD(0): Output PANEL connected (II) RADEONHD(0): Output VGA_1 disconnected (II) RADEONHD(0): Output DVI-D_1 connected (II) RADEONHD(0): Output PANEL using initial mode 1400x1050 (II) RADEONHD(0): Output DVI-D_1 using initial mode 1280x1024 <-- Selected mode

Any ideas why it happens ? And how can be cured ?

Full xorg.conf and Xorg.0.log are attached.

-- Vladimir B. Grebenschikov Parallels Inc. vova@parallels.com

__________________________________________________________ Gesendet von Yahoo! Mail. Dem pfiffigeren Posteingang. http://de.overview.mail.yahoo.com -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org