Mailinglist Archive: radeonhd (699 mails)

< Previous Next >
Re: [radeonhd] ASUS A8Jp, Mobility Radeon X1700 - DVI-connected monitor doesn't work
  • From: Kirill Belokurov <kirill.belokurov@xxxxxxxxx>
  • Date: Fri, 30 Nov 2007 01:27:51 +0200
  • Message-id: <200711300127.51913.kirill.belokurov@xxxxxxxxx>
On Thursday 29 November 2007, Luc Verhaegen wrote:
On Wed, Nov 28, 2007 at 01:17:55AM +0200, Kirill Belokurov wrote:
(missed the CC to list, resending)

Please find it in the attachment. For the record, below is the
rhd_conntest output when I was dumping it (TFT monitor was disconnected
this time):

Should be fixed in git now.

No, unfortunately this didn't resolve the issue: the error mesage from the
Xorg log is gone, even the TFT monitor modes are displayed now by xrandr, but
the TFT monitor (attached to the DVI) still blinks as there is no signal.
Trying to put it say as left to the panel via
$xrandr --output DVI-D_1 --left-of PANEL
blinks internal panel for a second and then Xorg thinks the TFT monitor is
added, but there is still now picture on it.

Output from xrandr
============================
fenikso@miracle:~$ xrandr
Screen 0: minimum 320 x 200, current 1440 x 900, maximum 1440 x 900
VGA_1 disconnected
PANEL connected 1440x900+0+0 0mm x 0mm
1440x900 59.9*+
TV_SVIDEO disconnected
DVI-D_1 connected 1024x768+0+0 304mm x 228mm
1024x768 60.0*+ 75.1 70.1 60.0*
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 60.0
720x400 70.1
============================

Output from xrandr --verbose
============================
Screen 0: minimum 320 x 200, current 1440 x 900, maximum 1440 x 900
VGA_1 disconnected (normal)
Identifier: 0x43
Timestamp: -1917383291
Subpixel: unknown
Clones: PANEL TV_SVIDEO DVI-D_1
CRTCs: 0 1
RANDR_OUTPUT_NUMBER: 1 (0x00000001)
RANDR_CONNECTOR_NUMBER: 1 (0x00000001)
RANDR_CONNECTOR_TYPE: VGA
RANDR_SIGNAL_FORMAT: VGA
PANEL connected 1440x900+0+0 (0x47) normal (normal) 0mm x 0mm
Identifier: 0x44
Timestamp: -1917383291
Subpixel: unknown
Clones: VGA_1 TV_SVIDEO DVI-D_1
CRTC: 0
CRTCs: 0 1
RANDR_OUTPUT_NUMBER: 2 (0x00000002)
RANDR_CONNECTOR_NUMBER: 2 (0x00000002)
RANDR_CONNECTOR_TYPE: LVDS
RANDR_SIGNAL_FORMAT: LVDS
1440x900 (0x47) 88.8MHz
h: width 1440 start 1488 end 1520 total 1600 skew 0 clock
55.5KHz
v: height 900 start 903 end 909 total 926 clock 59.9Hz
TV_SVIDEO disconnected (normal)
Identifier: 0x45
Timestamp: -1917383291
Subpixel: unknown
Clones: VGA_1 PANEL DVI-D_1
CRTCs: 0 1
RANDR_OUTPUT_NUMBER: 3 (0x00000003)
RANDR_CONNECTOR_NUMBER: 3 (0x00000003)
RANDR_CONNECTOR_TYPE: TV
RANDR_SIGNAL_FORMAT: unknown
DVI-D_1 connected 1024x768+0+0 (0x48) normal (normal) 304mm x 228mm
Identifier: 0x46
Timestamp: -1917383291
Subpixel: unknown
Clones: VGA_1 PANEL TV_SVIDEO
CRTC: 1
CRTCs: 0 1
RANDR_OUTPUT_NUMBER: 4 (0x00000004)
RANDR_CONNECTOR_NUMBER: 4 (0x00000004)
RANDR_CONNECTOR_TYPE: TMDS
RANDR_SIGNAL_FORMAT: TMDS
1024x768 (0x48) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock
48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
1024x768 (0x49) 78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock
60.1KHz
v: height 768 start 769 end 772 total 800 clock 75.1Hz
1024x768 (0x4a) 75.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock
56.5KHz
v: height 768 start 771 end 777 total 806 clock 70.1Hz
1024x768 (0x48) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock
48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
832x624 (0x4b) 57.3MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock
49.7KHz
v: height 624 start 625 end 628 total 667 clock 74.6Hz
800x600 (0x4c) 50.0MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock
48.1KHz
v: height 600 start 637 end 643 total 666 clock 72.2Hz
800x600 (0x4d) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock
46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0x4e) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock
37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x4f) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock
35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
640x480 (0x50) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock
37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0x51) 31.5MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock
37.9KHz
v: height 480 start 489 end 491 total 520 clock 72.8Hz
640x480 (0x52) 30.2MHz -HSync -VSync
h: width 640 start 704 end 768 total 864 skew 0 clock
35.0KHz
v: height 480 start 483 end 486 total 525 clock 66.7Hz
640x480 (0x53) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock
31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
720x400 (0x54) 28.3MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock
31.5KHz
v: height 400 start 412 end 414 total 449 clock 70.1Hz
============================


Output from rhd_connect
============================
rhd_conntest: v0.0.4, git branch master, commit 22641a17
Checking connectors on 0x71D5, 0x1043, 0x1242 (@01:00:00):
Load Detection: RHD_OUTPUT_TMDSA
HotPlug: RHD_HPD_0
DDC: RHD_DDC_1
LVDS Info:
18bits, dual link, LDI Panel found.
Power Timing: 0xF9F, 0x000, 0x03, 0x20, 0x1F4
Macro: 0x0C720407, Clock Pattern: 0x0063
DDC Line[1]: Slaves: 6e a0
============================

And Xorg log is in attachment.

Best regards, Kirill


< Previous Next >
Follow Ups