Mailinglist Archive: radeonhd (699 mails)

< Previous Next >
[radeonhd] LVTMA TMDS support
  • From: raiden@xxxxxxxxxxxxxxxx
  • Date: Tue, 13 Nov 2007 17:17:52 -0600 (CST)
  • Message-id: <Pine.LNX.4.64.0711131709200.28368@xxxxxxxxxxxxxxxx>

I have again reupdated the driver from GIT but still without any luck. I have also dumped the bios using rhd_conntest for you to add the 3 necessary bytes for the Radeon Sapphire X1600 512mb AGP card. (RV530 chipset)

rhd_conntest output
./rhd_conntest 01:00.0
rhd_conntest: version 0.0.2, built from git branch master, commit 6f1800ca..
Checking connectors on 0x71C2, 0x174B, 0x0850 (@01:00:00):
Load Detection: RHD_OUTPUT_TMDSA
HotPlug: RHD_HPD_NONE
DDC: RHD_DDC_1
DDC Line[1]: Slaves: a0

Xorg.log output

(==) RADEONHD(0): Depth 16, (--) framebuffer bpp 16
(WW) RADEONHD(0): Unknown card detected: 0x71C2:0x174B:0x0850.
If your card does not work or does not work optimally
please contact radeonhd@xxxxxxxxxxxx to help rectify this.
Include your X log, the full name of the device
and the rhd_conntest (found in utils/conntest) output.
(--) RADEONHD(0): Detected an RV530 on an unidentified card
(II) RADEONHD(0): Mapped IO at 0xb7be5000 (size 0x00010000)
(II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x174b SubsystemID: 0x0850
IOBaseAddress: 0x9000
Filename: 3C8501SA.005
BIOS Bootup Message:
RV530 Rialto Test BIOS DDR2 500e/400m

(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0x7ffb000
(--) RADEONHD(0): VideoRAM: 524288 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x7ffb000
(WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area not located at
the end of VRAM. Scratch End: 0x8000000 VRAM End: 0x20000000
(II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory
instead
(II) RADEONHD(0): Default Engine Clock: 635000
(II) RADEONHD(0): Default Memory Clock: 505000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) RADEONHD(0): Default Engine Clock: 635000
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) RADEONHD(0): Detected VGA mode.
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_VGA, "VGA CRT1", RHD_DDC_0,
RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_TV, "SVIDEO TV1", DDC_NONE,
RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DVI-I DFP1 CRT2",
RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
(--) RADEONHD(0): Attaching Output DAC A to Connector VGA CRT1
(--) RADEONHD(0): Attaching Output DAC B to Connector SVIDEO TV1
(--) RADEONHD(0): Attaching Output TMDS A to Connector DVI-I DFP1 CRT2
(--) RADEONHD(0): Attaching Output DAC B to Connector DVI-I DFP1 CRT2
(WW) RADEONHD(0): DACBSenseCRT: connector type 4 is not supported.
(EE) RADEONHD(0): Failed to detect a connected monitor
(II) RADEONHD(0): Destroying DAC A
(II) RADEONHD(0): Destroying DAC B
(II) RADEONHD(0): Destroying TMDS A
(II) RADEONHD(0): I2C bus "RHD I2C line 0" removed.
(II) RADEONHD(0): I2C bus "RHD I2C line 1" removed.
(II) RADEONHD(0): I2C bus "RHD I2C line 2" removed.
(II) UnloadModule: "radeonhd"
(EE) Screen(s) found, but none have a usable configuration.

and last.....the BIOS dump is located at

http://24.78.141.204/radeonx1600probios.tar.gz


Hope this helps.
--
To unsubscribe, e-mail: radeonhd+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: radeonhd+help@xxxxxxxxxxxx

< Previous Next >
This Thread
Follow Ups