Mailinglist Archive: radeonhd (699 mails)

< Previous Next >
[radeonhd] [Bug 13192] New: please add support of radeon x2300 to drivers
  • From: bugzilla-daemon@xxxxxxxxxxxxxxx
  • Date: Sun, 11 Nov 2007 23:50:25 -0800 (PST)
  • Message-id: <bug-13192-248@xxxxxxxxxxxxxxxxxxxxxxxxx/>
http://bugs.freedesktop.org/show_bug.cgi?id=13192

Summary: please add support of radeon x2300 to drivers
Product: xorg
Version: git
Platform: x86 (IA32)
OS/Version: Linux (All)
Status: NEW
Severity: major
Priority: high
Component: Driver/radeonhd
AssignedTo: lverhaegen@xxxxxxx
ReportedBy: pavel5@xxxxxx
QAContact: xorg-team@xxxxxxxxxxx


please add support of my x2300 mobility radeon (M64S) to radeonhd drivers. i
succesfully modified utility rhd_conntest, and now it recognizes my card:

localhost conntest # ./rhd_conntest 1:0.0
rhd_conntest: version 0.0.2, built from git branch master, commit e9c24f66.. +
changes
Checking connectors on 0x7188, 0x144D, 0xC515 (@01:00:00):
Load Detection: RHD_OUTPUT_NONE
HotPlug: RHD_HPD_NONE
DDC: RHD_DDC_1 RHD_DDC_2
LVDS Info:
18bits, single link, LDI Panel found.
Power Timing: 0xF9F, 0x012, 0x03, 0x19, 0x1F4
Macro: 0x0B520407, Clock Pattern: 0x0063
DDC Line[1]: Slaves: 10 12 14 16 18 1a 1c 1e 20 22 24 26 28 2a 2c 2e 30 32 34
36 38 3a 3c 3e 40 42 44 46 48 4a 4c 4e 50 52 54 56 58 5a 5c 5e 60 62 64 66 68
6a 6c 6e 70 72 74 76 78 7a 7c 7e 80 82 84 86 88 8a 8c 8e 90 92 94 96 98 9a 9c
9e a0 a2 a4 a6 a8 aa ac ae b0 b2 b4 b6 b8 ba bc be c0 c2 c4 c6 c8 ca cc ce d0
d2 d4 d6 d8 da dc de e0 e2 e4 e6 e8 ea ec ee

but my tries to modify drivers was not succesfull, and in xorg logs i still see
only one error message "(EE) Device not found" (proprietary drivers 8.40.4
doesn't works too). below is some additional information about card:

localhost conntest # hwinfo --gfxcard
26: PCI 100.0: 0300 VGA compatible controller (VGA)
[Created at pci.288]
Unique ID: VCu0.i1U55UNewxA
Parent ID: _Znp.IOaVMBVNBp3
SysFS ID: /devices/pci0000:00/0000:00:02.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: graphics card
Model: "Samsung Electronics VGA compatible controller"
Vendor: pci 0x0001
Device: pci 0x7188
SubVendor: pci 0x144d "Samsung Electronics Co Ltd"
SubDevice: pci 0xc515
Memory Range: 0xd0000000-0xd7ffffff (rw,prefetchable)
I/O Ports: 0x9000-0x9fff (rw)
Memory Range: 0xd8000000-0xd800ffff (rw,non-prefetchable)
Memory Range: 0xd8020000-0xd803ffff (ro,prefetchable,disabled)
IRQ: 5 (no events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v00000001d00007188sv0000144Dsd0000C515bc03sc00i00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #10 (PCI bridge)

Primary display adapter: #26

localhost conntest # lspci -vvv
01:00.0 VGA compatible controller: Unknown device 0001:7188 (prog-if 00 [VGA
controller])
Subsystem: Samsung Electronics Co Ltd Unknown device c515
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at d8000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at d8020000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1
unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency
L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000

PS: this videocard is installed in SAMSUNG NP-R25F000/SEK notebook.


--
Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
_______________________________________________
xorg-team mailing list
xorg-team@xxxxxxxxxxx
http://lists.x.org/mailman/listinfo/xorg-team
--
To unsubscribe, e-mail: radeonhd+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: radeonhd+help@xxxxxxxxxxxx

< Previous Next >