Mailinglist Archive: radeonhd (699 mails)

< Previous Next >
Re: [radeonhd] AMD64 based RS690T system and RadeonHD driver almost works under FreeBSD
  • From: Coleman Kane <cokane@xxxxxxxxxx>
  • Date: Fri, 09 Nov 2007 10:50:32 -0500
  • Message-id: <473481C8.6000101@xxxxxxxxxx>
Coleman Kane wrote:
Rene Ladan wrote:

2007/11/9, Coleman Kane <cokane@xxxxxxxxxxx>:


Hello,

I just recently got an HP Compaq 6715b laptop with an ATI Radeon Xpress
X1270 in it. I am trying to get this card working under FreeBSD and
X.org 7.3, and so far the RadeonHD driver has been the closest thing to
get it working (vesa, radeon, and avivo all die).



radeon is only meant for <= R4xx cards so it can't handle RadeonHD cards.
VESA works on my M64P (X1450 Mobility) card though. I never got avivo
working properly.



The log output for radeonhd says "Unkown Card Detected:
0x791F:0x103C:0x30C2".



This shouldn't be a problem. It's a remnant from the time when the
detection of
connector layouts were entered manually into the code. The current
driver uses AtomBIOS for that.



The EDID stuff gives Horiz timing of only 64.1kHz and Vert timing of
only 60.1Hz (making it impossible to allow other video modes to test)

There is also one error stating that "D1CRTCDisable: Failed to Unsync
CRTC 1".



I think the driver chokes on this.


I am attaching my Xorg.0.log in case anything sticks out... I tried
using the rhd_conntest, but it doesn't seem to work appropriately on my
machine.



Using libpci-2.2.8 from ports you should be able to dump your AtomBIOS
with rhd_conntest using the -d option. Showing the connector layout
doesn't work on my i386 CURRENT box.

I'll send-pr an update for the port (x11-drivers/xf86-video-radeonhd)
once the ports freeze is over.



I would really like to get this working on this laptop ASAP so let me
know where I can start. I've scoured the internet looking for
information, and it seems that most Linux users are using the fglrx
driver instead (which is a no-go for me as there's no amd64 fglrx for
FreeBSD).



I've toyed around with fglrx too a bit, but never made it properly
through the installer.

Regards,
Rene


The current HEAD from anongit.freedesktop.org actually starts up X and
seems to work, except that the screen is extremely garbled. I can move
the mouse around and see a garbled cursor move around on the display. I
forgot to mention that it behaves this way in the email. So X does load
up and I do get a display, it is just completely unusable. Also, I get a
message from rhd_conntest that reads "Unable to map IO memory: No such
file or directory.", however I just realized that it is creating a
.vga.rom file, so I am attaching this.

I have been messing around with this further and I don't know what I did
but now radeonhd works on this notebook @ 1680x1050x24bpp (what I
want)... I've been flipping around with a number of different xorg.conf
options with the vesa and the avivo drivers (both of which won't let X11
start). Finally, I tried 'radeonhd' again and it just worked! I even
rebooted the notebook (hard power off then back on) just in case it was
a fluke, and what ever it is seems to be working consistently.

Thanks for the help.

I'm attaching my new log and my new conf file in case it can be of any help.

--
Coleman Kane



X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 8.0-CURRENT amd64
Current Operating System: FreeBSD erwin 8.0-CURRENT FreeBSD 8.0-CURRENT #0: Wed
Oct 24 08:40:00 EDT 2007 root@erwin:/usr/obj/usr/src/sys/ERWIN amd64
Build Date: 05 November 2007 03:13:46PM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 9 15:38:44 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Radeon VGA"
(==) No monitor specified for screen "Screen 1".
Using a default monitor configuration.
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) `fonts.dir' not found (or not valid) in "/usr/local/lib/X11/fonts/local/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/local/lib/X11/fonts/local/").
(WW) `fonts.dir' not found (or not valid) in "/usr/local/lib/X11/fonts/dejavu/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/local/lib/X11/fonts/dejavu/").
(==) Including the default font path
/usr/local/lib/X11/fonts/misc/,/usr/local/lib/X11/fonts/TTF/,/usr/local/lib/X11/fonts/OTF,/usr/local/lib/X11/fonts/Type1/,/usr/local/lib/X11/fonts/100dpi/,/usr/local/lib/X11/fonts/75dpi/.
(**) FontPath set to:
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/,
/usr/local/lib/X11/fonts/bitstream-vera/,
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/
(==) RgbPath set to "/usr/local/share/X11/rgb"
(==) ModulePath set to "/usr/local/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) Ignoring unrecognized extension "Damage"
(WW) Ignoring unrecognized extension "Render"
(II) Loader magic: 0x67fce0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on freebsd
(II) LoadModule: "pcidata"
(II) Loading /usr/local/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(WW) OS did not count PCI devices, guessing wildly
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1002,7910 card 103c,30c2 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1002,7912 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:04:0: chip 1002,7914 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:05:0: chip 1002,7915 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:06:0: chip 1002,7916 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:12:0: chip 1002,4380 card 1002,4380 rev 00 class 01,01,8f hdr 00
(II) PCI: 00:13:0: chip 1002,4387 card 103c,30c2 rev 00 class 0c,03,10 hdr 80
(II) PCI: 00:13:1: chip 1002,4388 card 103c,30c2 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:2: chip 1002,4389 card 103c,30c2 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:3: chip 1002,438a card 103c,30c2 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:4: chip 1002,438b card 103c,30c2 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:5: chip 1002,4386 card 103c,30c2 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:14:0: chip 1002,4385 card 103c,30c2 rev 14 class 0c,05,00 hdr 80
(II) PCI: 00:14:1: chip 1002,438c card 103c,30c2 rev 00 class 01,01,82 hdr 00
(II) PCI: 00:14:2: chip 1002,4383 card 103c,30c2 rev 00 class 04,03,00 hdr 00
(II) PCI: 00:14:3: chip 1002,438d card 103c,30c2 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:14:4: chip 1002,4384 card 0000,0000 rev 00 class 06,04,01 hdr 81
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:05:0: chip 1002,791f card 103c,30c2 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:04:0: chip 1180,0476 card fffc,ffff rev b6 class 06,07,00 hdr 82
(II) PCI: 02:04:1: chip 1180,0832 card 103c,30c2 rev 02 class 0c,00,10 hdr 80
(II) PCI: 10:00:0: chip 14e4,1693 card 103c,30c2 rev 02 class 02,00,00 hdr 00
(II) PCI: 30:00:0: chip 14e4,4328 card 103c,1366 rev 03 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,48), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd0400000 - 0xd05fffff (0x200000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 16: bridge is at (0:4:0), (0,16,16), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 16 non-prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd00fffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 32: bridge is at (0:5:0), (0,32,32), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 32 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[B]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[B]
[4] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[5] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[6] -1 0 0x00003800 - 0x000038ff (0x100) IX[B]
[7] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 32 non-prefetchable memory range:
[0] -1 0 0xcc000000 - 0xcfffffff (0x4000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 48: bridge is at (0:6:0), (0,48,48), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 48 non-prefetchable memory range:
[0] -1 0 0xc8100000 - 0xc81fffff (0x100000) MX[B]
(II) Bus 48 prefetchable memory range:
[0] -1 0 0xc8000000 - 0xc80fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:20:4), (0,2,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xd0100000 - 0xd03fffff (0x300000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:4:0), (2,3,3), BCTRL: 0x0700 (VGA_EN is cleared)
(--) PCI:*(1:5:0) ATI Technologies Inc Radeon X1200 Series rev 0, Mem @
0xc0000000/27, 0xd0400000/16, 0xd0500000/20, I/O @ 0x4000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B]E
[1] -1 0 0xc8100000 - 0xc81fffff (0x100000) MX[B]E
[2] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B]E
[3] -1 0 0xd0101000 - 0xd0101fff (0x1000) MX[B]E
[4] -1 0 0xd0608000 - 0xd060ffff (0x8000) MX[B]E
[5] -1 0 0xd0606000 - 0xd0607fff (0x2000) MX[B]E
[6] -1 0 0xd0605000 - 0xd0605fff (0x1000) MX[B]E
[7] -1 0 0xd0604000 - 0xd0607fff (0x4000) MX[B]E
[8] -1 0 0xd0603000 - 0xd0603fff (0x1000) MX[B]E
[9] -1 0 0xd0602000 - 0xd0603fff (0x2000) MX[B]E
[10] -1 0 0xd0601000 - 0xd0601fff (0x1000) MX[B]E
[11] -1 0 0xd0609000 - 0xd0609fff (0x1000) MX[B]E
[12] -1 0 0xd0500000 - 0xd05fffff (0x100000) MX[B](B)
[13] -1 0 0xd0400000 - 0xd040ffff (0x10000) MX[B](B)
[14] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[15] -1 0 0x00005040 - 0x0000507f (0x40) IX[B]E
[16] -1 0 0x00008200 - 0x000082ff (0x100) IX[B]E
[17] -1 0 0x00005020 - 0x0000503f (0x20) IX[B]E
[18] -1 0 0x00005018 - 0x0000501f (0x8) IX[B]E
[19] -1 0 0x00009010 - 0x0000901f (0x10) IX[B]E
[20] -1 0 0x00009008 - 0x0000900f (0x8) IX[B]E
[21] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]E
[22] -1 0 0x00004000 - 0x000040ff (0x100) IX[B](B)
(II) PCI Memory resource overlap reduced 0xc8000000 from 0xcfffffff to
0xc80fffff
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xdfffffff to
0xd00fffff
(II) PCI Memory resource overlap reduced 0xd0608000 from 0xd060ffff to
0xd0608fff
(II) PCI Memory resource overlap reduced 0xd0604000 from 0xd0607fff to
0xd0604fff
(II) PCI Memory resource overlap reduced 0xd0602000 from 0xd0603fff to
0xd0602fff
(II) PCI I/O resource overlap reduced 0x00009000 from 0x000090ff to 0x00009007
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xc8000000 - 0xc80fffff (0x100000) MX[B]E
[1] -1 0 0xc8100000 - 0xc81fffff (0x100000) MX[B]E
[2] -1 0 0xd0000000 - 0xd00fffff (0x100000) MX[B]E
[3] -1 0 0xd0101000 - 0xd0101fff (0x1000) MX[B]E
[4] -1 0 0xd0608000 - 0xd0608fff (0x1000) MX[B]E
[5] -1 0 0xd0606000 - 0xd0607fff (0x2000) MX[B]E
[6] -1 0 0xd0605000 - 0xd0605fff (0x1000) MX[B]E
[7] -1 0 0xd0604000 - 0xd0604fff (0x1000) MX[B]E
[8] -1 0 0xd0603000 - 0xd0603fff (0x1000) MX[B]E
[9] -1 0 0xd0602000 - 0xd0602fff (0x1000) MX[B]E
[10] -1 0 0xd0601000 - 0xd0601fff (0x1000) MX[B]E
[11] -1 0 0xd0609000 - 0xd0609fff (0x1000) MX[B]E
[12] -1 0 0xd0500000 - 0xd05fffff (0x100000) MX[B](B)
[13] -1 0 0xd0400000 - 0xd040ffff (0x10000) MX[B](B)
[14] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[15] -1 0 0x00005040 - 0x0000507f (0x40) IX[B]E
[16] -1 0 0x00008200 - 0x000082ff (0x100) IX[B]E
[17] -1 0 0x00005020 - 0x0000503f (0x20) IX[B]E
[18] -1 0 0x00005018 - 0x0000501f (0x8) IX[B]E
[19] -1 0 0x00009010 - 0x0000901f (0x10) IX[B]E
[20] -1 0 0x00009008 - 0x0000900f (0x8) IX[B]E
[21] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]E
[22] -1 0 0x00004000 - 0x000040ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xc8000000 - 0xc80fffff (0x100000) MX[B]E
[5] -1 0 0xc8100000 - 0xc81fffff (0x100000) MX[B]E
[6] -1 0 0xd0000000 - 0xd00fffff (0x100000) MX[B]E
[7] -1 0 0xd0101000 - 0xd0101fff (0x1000) MX[B]E
[8] -1 0 0xd0608000 - 0xd0608fff (0x1000) MX[B]E
[9] -1 0 0xd0606000 - 0xd0607fff (0x2000) MX[B]E
[10] -1 0 0xd0605000 - 0xd0605fff (0x1000) MX[B]E
[11] -1 0 0xd0604000 - 0xd0604fff (0x1000) MX[B]E
[12] -1 0 0xd0603000 - 0xd0603fff (0x1000) MX[B]E
[13] -1 0 0xd0602000 - 0xd0602fff (0x1000) MX[B]E
[14] -1 0 0xd0601000 - 0xd0601fff (0x1000) MX[B]E
[15] -1 0 0xd0609000 - 0xd0609fff (0x1000) MX[B]E
[16] -1 0 0xd0500000 - 0xd05fffff (0x100000) MX[B](B)
[17] -1 0 0xd0400000 - 0xd040ffff (0x10000) MX[B](B)
[18] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[21] -1 0 0x00005040 - 0x0000507f (0x40) IX[B]E
[22] -1 0 0x00008200 - 0x000082ff (0x100) IX[B]E
[23] -1 0 0x00005020 - 0x0000503f (0x20) IX[B]E
[24] -1 0 0x00005018 - 0x0000501f (0x8) IX[B]E
[25] -1 0 0x00009010 - 0x0000901f (0x10) IX[B]E
[26] -1 0 0x00009008 - 0x0000900f (0x8) IX[B]E
[27] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]E
[28] -1 0 0x00004000 - 0x000040ff (0x100) IX[B](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in
the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in
the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in
the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified
in the config file.
(II) "type1" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/local/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/local/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "type1"
(II) Loading /usr/local/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeonhd"
(II) Loading /usr/local/lib/xorg/modules/drivers//radeonhd_drv.so
(II) Module radeonhd: vendor="AMD GPG"
compiled for 1.4.0, module version = 0.0.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
RV505 : Radeon X1550, X1550 64bit.
RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
RV535 : Radeon X1300, X1650.
RV550 : Radeon X2300 HD.
RV560 : Radeon X1650.
RV570 : Radeon X1950, X1950 GT; FireGL V7400.
R580 : Radeon X1900, X1950; AMD Stream Processor.
R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
FireGL V3600/V5600.
M52 : Mobility Radeon X1300.
M54 : Mobility Radeon X1400; M54-GL.
M56 : Mobility Radeon X1600; Mobility FireGL V5200.
M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
M62 : Mobility Radeon X1350.
M64 : Mobility Radeon X1450, X2300.
M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
M68 : Mobility Radeon X1900.
M71 : Mobility Radeon HD 2300.
M72 : Mobility Radeon HD 2400; Radeon E2400.
M74 : Mobility Radeon HD 2400 XT.
M76 : Mobility Radeon HD 2600; (Gemini ATI) Mobility Radeon HD 2600
XT.
RS690 : Radeon X1200.
RS740 : RS740, RS740M

RADEONHD: version 0.0.2, built from git branch master, commit e9c24f66..

(II) Primary Device is: PCI 01:05:0
(--) Assigning device section with no busID to primary device
(--) Chipset RS690 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xc8000000 - 0xc80fffff (0x100000) MX[B]E
[5] -1 0 0xc8100000 - 0xc81fffff (0x100000) MX[B]E
[6] -1 0 0xd0000000 - 0xd00fffff (0x100000) MX[B]E
[7] -1 0 0xd0101000 - 0xd0101fff (0x1000) MX[B]E
[8] -1 0 0xd0608000 - 0xd0608fff (0x1000) MX[B]E
[9] -1 0 0xd0606000 - 0xd0607fff (0x2000) MX[B]E
[10] -1 0 0xd0605000 - 0xd0605fff (0x1000) MX[B]E
[11] -1 0 0xd0604000 - 0xd0604fff (0x1000) MX[B]E
[12] -1 0 0xd0603000 - 0xd0603fff (0x1000) MX[B]E
[13] -1 0 0xd0602000 - 0xd0602fff (0x1000) MX[B]E
[14] -1 0 0xd0601000 - 0xd0601fff (0x1000) MX[B]E
[15] -1 0 0xd0609000 - 0xd0609fff (0x1000) MX[B]E
[16] -1 0 0xd0500000 - 0xd05fffff (0x100000) MX[B](B)
[17] -1 0 0xd0400000 - 0xd040ffff (0x10000) MX[B](B)
[18] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[21] -1 0 0x00005040 - 0x0000507f (0x40) IX[B]E
[22] -1 0 0x00008200 - 0x000082ff (0x100) IX[B]E
[23] -1 0 0x00005020 - 0x0000503f (0x20) IX[B]E
[24] -1 0 0x00005018 - 0x0000501f (0x8) IX[B]E
[25] -1 0 0x00009010 - 0x0000901f (0x10) IX[B]E
[26] -1 0 0x00009008 - 0x0000900f (0x8) IX[B]E
[27] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]E
[28] -1 0 0x00004000 - 0x000040ff (0x100) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xc8000000 - 0xc80fffff (0x100000) MX[B]E
[5] -1 0 0xc8100000 - 0xc81fffff (0x100000) MX[B]E
[6] -1 0 0xd0000000 - 0xd00fffff (0x100000) MX[B]E
[7] -1 0 0xd0101000 - 0xd0101fff (0x1000) MX[B]E
[8] -1 0 0xd0608000 - 0xd0608fff (0x1000) MX[B]E
[9] -1 0 0xd0606000 - 0xd0607fff (0x2000) MX[B]E
[10] -1 0 0xd0605000 - 0xd0605fff (0x1000) MX[B]E
[11] -1 0 0xd0604000 - 0xd0604fff (0x1000) MX[B]E
[12] -1 0 0xd0603000 - 0xd0603fff (0x1000) MX[B]E
[13] -1 0 0xd0602000 - 0xd0602fff (0x1000) MX[B]E
[14] -1 0 0xd0601000 - 0xd0601fff (0x1000) MX[B]E
[15] -1 0 0xd0609000 - 0xd0609fff (0x1000) MX[B]E
[16] -1 0 0xd0500000 - 0xd05fffff (0x100000) MX[B](B)
[17] -1 0 0xd0400000 - 0xd040ffff (0x10000) MX[B](B)
[18] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[21] -1 0 0x00005040 - 0x0000507f (0x40) IX[B]E
[22] -1 0 0x00008200 - 0x000082ff (0x100) IX[B]E
[23] -1 0 0x00005020 - 0x0000503f (0x20) IX[B]E
[24] -1 0 0x00005018 - 0x0000501f (0x8) IX[B]E
[25] -1 0 0x00009010 - 0x0000901f (0x10) IX[B]E
[26] -1 0 0x00009008 - 0x0000900f (0x8) IX[B]E
[27] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]E
[28] -1 0 0x00004000 - 0x000040ff (0x100) IX[B](B)
(**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Option "shadowfb" "true"
(WW) RADEONHD(0): Unknown card detected: 0x791F:0x103C:0x30C2.
If your card does not work or does not work optimally
please contact radeonhd@xxxxxxxxxxxx to help rectify this.
Include your X log, the full name of the device
and the rhd_conntest (found in utils/conntest) output.
(--) RADEONHD(0): Detected an RS690 on an unidentified card
(==) RADEONHD(0): Write-combining range (0xd0400000,0x10000) was already clear
(II) RADEONHD(0): Mapped IO at 0x8006b3000 (size 0x00010000)
(II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1002 SubsystemID: 0x791f
IOBaseAddress: 0x4000
Filename: br23883.bin
BIOS Bootup Message:
ATI Radeon Xpress ?1250? for HP_TT

(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0x7ffb000
(--) RADEONHD(0): VideoRAM: 131072 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x7ffb000
(II) RADEONHD(0): Default Engine Clock: 400000
(II) RADEONHD(0): Default Memory Clock: 200000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 14320
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) RADEONHD(0): Default Engine Clock: 400000
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) RADEONHD(0): Detected VGA mode.
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 14320
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_VGA, "VGA CRT1", RHD_DDC_0,
RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_PANEL, "PANEL LCD1", RHD_DDC_1,
RHD_HPD_NONE, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_TV, "SVIDEO TV1", DDC_NONE,
RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } }
(--) RADEONHD(0): Attaching Output DAC A to Connector VGA CRT1
(II) RADEONHD(0): LVDS SEQ Dig onto DE: 30
(II) RADEONHD(0): LVDS SEQ DE to BL: 360
(II) RADEONHD(0): LVDS Off Delay: 500
(II) RADEONHD(0): LVDS Duallink: 0x1
(II) RADEONHD(0): LVDS 24Bit: 0x0
(II) RADEONHD(0): LVDS FPDI: 0x4d0
(--) RADEONHD(0): Detected a 18bit dual link panel.
(--) RADEONHD(0): Attaching Output LVDS/TMDS to Connector PANEL LCD1
(--) RADEONHD(0): Attaching Output DAC A to Connector SVIDEO TV1
(WW) RADEONHD(0): DACASenseCRT: connector type 4 is not supported.
(II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" registered at address 0xA0.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(0): EDID data for LVDS Panel
(II) RADEONHD(0): Manufacturer: LPL Model: cd00 Serial#: 0
(II) RADEONHD(0): Year: 2006 Week: 0
(II) RADEONHD(0): EDID Version: 1.3
(II) RADEONHD(0): Digital Display Input
(II) RADEONHD(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEONHD(0): Gamma: 2.20
(II) RADEONHD(0): No DPMS capabilities specified; RGB/Color Display
(II) RADEONHD(0): First detailed timing is preferred mode
(II) RADEONHD(0): redX: 0.590 redY: 0.345 greenX: 0.326 greenY: 0.544
(II) RADEONHD(0): blueX: 0.157 blueY: 0.141 whiteX: 0.313 whiteY: 0.329
(II) RADEONHD(0): Manufacturer's mask: 0
(II) RADEONHD(0): Supported additional Video Mode:
(II) RADEONHD(0): clock: 122.0 MHz Image Size: 331 x 207 mm
(II) RADEONHD(0): h_active: 1680 h_sync: 1712 h_sync_end 1776 h_blank_end
1904 h_border: 0
(II) RADEONHD(0): v_active: 1050 v_sync: 1051 v_sync_end 1054 v_blanking:
1066 v_border: 0
(II) RADEONHD(0): LGPhilipsLCD
(II) RADEONHD(0): LP154WE2-TLA1
(II) RADEONHD(0): EDID (in hex):
(II) RADEONHD(0): 00ffffffffffff00320c00cd00000000
(II) RADEONHD(0): 00100103802115780a19459758538b28
(II) RADEONHD(0): 24505400000001010101010101010101
(II) RADEONHD(0): 010101010101a82f90e0601a10402040
(II) RADEONHD(0): 13004bcf100000190000000000000000
(II) RADEONHD(0): 00000000000000000000000000fe004c
(II) RADEONHD(0): 475068696c6970734c43440a000000fe
(II) RADEONHD(0): 004c503135345745322d544c41310035
(II) RADEONHD(0): Connector "PANEL LCD1" uses Monitor "LVDS Panel":
Bandwidth: 122MHz
Horizontal timing:
64.1 - 64.1kHz
Vertical timing:
60.1 - 60.1Hz
Allows reduced blanking.
Uses Fixed Modes.
Attached modes:
Modeline "1680x1050" 122.00 1680 1712 1776 1904 1050 1051 1054 1066
(II) RADEONHD(0): Listing modesetting layout:

CRTC 1: tied to PLL 1 and LUT A:
Outputs: LVDS/TMDS (PANEL LCD1)

CRTC 2: unused

Unused Outputs: DAC A

(==) RADEONHD(0): RGB weight 888
(==) RADEONHD(0): Default visual is TrueColor
(==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEONHD(0): Validating Fixed Modes from Monitor "LVDS Panel"
on Connector "PANEL LCD1"
(II) RADEONHD(0): Generating Modeline for "640x480"
(II) RADEONHD(0): Rejected mode "640x480" (640x480):
hsync out of range
(II) RADEONHD(0): Using 1680x1050 Framebuffer with 1728 pitch
(--) RADEONHD(0): Virtual size is 1680x1050 (pitch 1728)
(**) RADEONHD(0): *Mode "1680x1050": 122.0 MHz, 64.1 kHz, 60.1 Hz
(II) RADEONHD(0): Modeline "1680x1050"x60.1 122.00 1680 1712 1776 1904 1050
1051 1054 1066 (64.1 kHz)
(==) RADEONHD(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/local/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/local/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) RADEONHD(0): Using ShadowFB
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd0500000 - 0xd05fffff (0x100000) MS[B]
[1] 0 0 0xd0400000 - 0xd040ffff (0x10000) MS[B]
[2] 0 0 0xc0000000 - 0xc7ffffff (0x8000000) MS[B]
[3] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xc8000000 - 0xc80fffff (0x100000) MX[B]E
[8] -1 0 0xc8100000 - 0xc81fffff (0x100000) MX[B]E
[9] -1 0 0xd0000000 - 0xd00fffff (0x100000) MX[B]E
[10] -1 0 0xd0101000 - 0xd0101fff (0x1000) MX[B]E
[11] -1 0 0xd0608000 - 0xd0608fff (0x1000) MX[B]E
[12] -1 0 0xd0606000 - 0xd0607fff (0x2000) MX[B]E
[13] -1 0 0xd0605000 - 0xd0605fff (0x1000) MX[B]E
[14] -1 0 0xd0604000 - 0xd0604fff (0x1000) MX[B]E
[15] -1 0 0xd0603000 - 0xd0603fff (0x1000) MX[B]E
[16] -1 0 0xd0602000 - 0xd0602fff (0x1000) MX[B]E
[17] -1 0 0xd0601000 - 0xd0601fff (0x1000) MX[B]E
[18] -1 0 0xd0609000 - 0xd0609fff (0x1000) MX[B]E
[19] -1 0 0xd0500000 - 0xd05fffff (0x100000) MX[B](B)
[20] -1 0 0xd0400000 - 0xd040ffff (0x10000) MX[B](B)
[21] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[22] 0 0 0x00004000 - 0x000040ff (0x100) IS[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[25] -1 0 0x00005040 - 0x0000507f (0x40) IX[B]E
[26] -1 0 0x00008200 - 0x000082ff (0x100) IX[B]E
[27] -1 0 0x00005020 - 0x0000503f (0x20) IX[B]E
[28] -1 0 0x00005018 - 0x0000501f (0x8) IX[B]E
[29] -1 0 0x00009010 - 0x0000901f (0x10) IX[B]E
[30] -1 0 0x00009008 - 0x0000900f (0x8) IX[B]E
[31] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]E
[32] -1 0 0x00004000 - 0x000040ff (0x100) IX[B](B)
(==) RADEONHD(0): Write-combining range (0xd0400000,0x10000) was already clear
(II) RADEONHD(0): Mapped IO at 0x8006b3000 (size 0x00010000)
(==) RADEONHD(0): Write-combining range (0xc0000000,0x8000000)
(II) RADEONHD(0): PCI FB Address (BAR) is at 0xC0000000 while card Internal
Address is 0x78000000
(II) RADEONHD(0): Mapped FB at 0x802d5b000 (size 0x08000000)
(II) RADEONHD(0): Setting up "1680x1050" (1680x1050@xxxxxx)
(II) RADEONHD(0): Shutting down DAC A
(II) RADEONHD(0): Using 18363 scanlines of offscreen memory
(==) RADEONHD(0): Backing store disabled
(==) RADEONHD(0): Silken mouse enabled
(II) RADEONHD(0): Using HW cursor
(WW) RADEONHD(0): Option "IgnoreEDID" is not used
(WW) RADEONHD(0): Option "BusType" is not used
(WW) RADEONHD(0): Option "DRI" is not used
(WW) RADEONHD(0): Option "AccelMethod" is not used
(WW) RADEONHD(0): Option "RenderAccel" is not used
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/local/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "Protocol" "SysMouse"
(**) Mouse1: Device: "/dev/sysmouse"
(**) Mouse1: Protocol: "SysMouse"
(**) Option "CorePointer"
(**) Mouse1: always reports core events
(**) Option "Device" "/dev/sysmouse"
(**) Option "BaudRate" "1200"
(**) Option "StopBits" "2"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "0"
(**) Option "FlowControl" "None"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Mouse1: Sensitivity: 1
(**) Mouse1: BaudRate: 1200
(**) Option "CoreKeyboard"
(**) Keyboard1: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Keyboard1: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) evaluating device (Keyboard1)
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) evaluating device (Mouse1)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
FreeFontPath: FPE "/usr/local/lib/X11/fonts/misc/" refcount is 2, should be 1;
fixing.
# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the font modules
# Load "type1"
Load "freetype"
# Load "xtt"

# This loads the GLX module
Load "glx"
Load "int10"
# This loads the DRI module
# Load "dri"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

# RgbPath "/usr/local/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

FontPath "/usr/local/lib/X11/fonts/misc/"
FontPath "/usr/local/lib/X11/fonts/TTF/"
FontPath "/usr/local/lib/X11/fonts/OTF"
FontPath "/usr/local/lib/X11/fonts/Type1/"
FontPath "/usr/local/lib/X11/fonts/100dpi/"
FontPath "/usr/local/lib/X11/fonts/75dpi/"
FontPath "/usr/local/lib/X11/fonts/local/"
FontPath "/usr/local/lib/X11/fonts/dejavu/"
FontPath "/usr/local/lib/X11/fonts/bitstream-vera/"

# The module search path. The default path is shown here.

# ModulePath "/usr/local/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"
# Option "AIGLX" "on"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "SysMouse" # SysMouse
Option "Device" "/dev/sysmouse"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Mouse-speed setting for PS/2 mouse.

# Option "Resolution" "256"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.

Option "ZAxisMapping" "4 5 6 7"

# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "Laptop Display"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 30-120

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 40-150
ModeLine "1680x1050" 188.07 1680 1800 1984 2288 1050 1051 1054 1112

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
Identifier "Radeon VGA"
Driver "radeonhd"
Option "IgnoreEDID" "true"
# VideoRam 128
# Option "EnablePageFlip" "on"
Option "BusType" "PCIE"
# Option "ColorTiling" "on"
# Option "DynamicClocks" "on"
Option "ShadowFB" "true"
Option "DRI" "false"
Option "AccelMethod" "EXA"
Option "RenderAccel" "true"
# Option "AGPMode" "4"
# Option "AGPFastWrite" "off"
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "Radeon VGA"
# Monitor "Laptop Display"
DefaultDepth 24
# Option "XaaNoOffscreenPixmaps" "on"
# Option "XaaNoPixmapCache" "on"
# Option "XaaNoScreenToScreenCopy" "on"

Subsection "Display"
Depth 8
Modes "640x480" "1680x1050"
# Modes "1280x800" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "640x480" "1680x1050"
# Modes "1280x800" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "640x480" "1680x1050"
# Modes "1280x800" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.

Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

Section "DRI"
Mode 0660
EndSection

Section "Extensions"
Option "Composite" "Enable"
Option "Damage" "Enable"
Option "Render" "Enable"
EndSection
< Previous Next >
Follow Ups