Mailinglist Archive: radeonhd (699 mails)

< Previous Next >
RE: [radeonhd] RadeonHD fails to detect connectors with HD2600PRO
  • From: "Bridgman, John" <John.Bridgman@xxxxxxx>
  • Date: Thu, 1 Nov 2007 16:51:05 -0400
  • Message-id: <3C98586780008C428FDDD04F3E42083BEF85C3@xxxxxxxxxxxxxxxxx>
If this is the same issue just posted on IRC, it looks like you have
dual DVI connectors plus a DIN connnector, and the screen is plugged
into the second DVI. Can you try it on the first DVI connector ?

-----Original Message-----
From: Samuli Suominen [mailto:drac@xxxxxxxxxx]
Sent: Thursday, November 01, 2007 4:48 PM
To: radeonhd@xxxxxxxxxxxx
Subject: [radeonhd] RadeonHD fails to detect connectors with HD2600PRO

rhd_conntest 01:00.0

Checking connectors on 0x9589, 0x174B, 0x2E42 (@01:00:00):
Load Detection: RHD_OUTPUT_NONE
HotPlug: RHD_HPD_1
DDC: RHD_DDC_NONE

(EE) RADEONHD(0): RHDLVTMAInit: unhandled connector type: 2

Xorg.0.log is at http://dev.gentoo.org/~drac/Xorg.0.log

01:00.0 VGA compatible controller: ATI Technologies Inc RV630 [Radeon HD
2600 Series] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Unknown device 2e42
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fdee0000 (64-bit, non-prefetchable)
[size=64K]
Region 4: I/O ports at de00 [size=256]
[virtual] Expansion ROM at fde00000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1,
Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000

Card is part of Acer Insire M5100 desktop machine, says it's HD2600 PRO
--
To unsubscribe, e-mail: radeonhd+unsubscribe@xxxxxxxxxxxx For additional
commands, e-mail: radeonhd+help@xxxxxxxxxxxx





--
To unsubscribe, e-mail: radeonhd+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: radeonhd+help@xxxxxxxxxxxx

< Previous Next >
References