Ben Fennema wrote:
On Mon, Jul 22, 2002 at 11:28:35AM -0700, guStaVo ZaeRa wrote:
I've done as you suggested :
dd if=/dev/zero of=/dev/sr0 bs=2048 count=2295104
but since i don't have sr0 in my /dev dir, i assume it's supposed to be scd0.
[root@ksi4 /root]# dd if=/dev/zero of=/dev/scd0 bs=2048 count=2295104 dd: /dev/scd0: Read-only file system
So then i try to do this :
[root@ksi4 /root]# mkudffs --media-type=cdrw /dev/cdrom trying to change type of multiple extents
Wasn't that working before? I'm confused.. You've applied the kernel patch for DVD+RW, right?
Ben
believe me, i'm pretty confused as well.. yes, it was working before, but i tried to do several things, and now, i can't make it work again. so, i'm going to start from scratch. i've downloaded the 2.4.17 kernel source, and applied the corresponding UDF patch. Then, i compile the new kernel with 'make dep clean bzImage modules modules_install'. Then cp bzImage to /boot and run lilo. Then reboot. When i boot up with the new kernel, the UDF module is loaded, but when i try to do the dd command you suggested, i get the error i mentioned before. what i'm i forgetting? gustavo -- guStaSo ZaeRa | Software Engineer BRE Systems LLC. 1532 State Street Suite C Santa Barbara, Ca 93101 gzaera@bresystems.com http://www.bresystems.com "My goal is to make any information available from anywhere, at anytime."