Mailinglist Archive: opensuse (856 mails)

< Previous Next >
Re: [opensuse] audio config
On Mon, Oct 24, 2016 at 12:57 AM, Dave Howorth <dave@xxxxxxxxxxxxxx> wrote:
On Fri, 21 Oct 2016 16:12:53 -0400
Felix Miata <mrmazda@xxxxxxxxxxxxx> wrote:

Dave Howorth composed on 2016-10-21 20:42 (UT+0100):

Hmm, I'm just getting frustrated. I added

options snd index=1,0

In comment 11 Takashi corrected his comment 8 suggestion to:

options snd-hda-intel index=1,0

That's what this 42.1 system with working sound has configured.
Here's an excerpt from my output:

!!Soundcards recognised by ALSA

0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7d10000 irq 29
1 [HDMI ]: HDA-Intel - HDA Intel HDMI
HDA Intel HDMI at 0xf7d14000 irq 30

!!PCI Soundcards installed in the system

00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core
Processor HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset
High Definition Audio Controller (rev 04)

!!Advanced information - PCI Vendor/Device/Subsystem ID's

00:02.0 0300: 8086:0402 (rev 06) (prog-if 00 [VGA controller])
Subsystem: 1462:7850
00:03.0 0403: 8086:0c0c (rev 06)
Subsystem: 1462:7850
00:1b.0 0403: 8086:8c20 (rev 04)
Subsystem: 1462:d850

!!Modprobe options (Sound related)

snd_hda_intel: index=1,0

Other than you've set modprobe according to Takashi's comment 8
rather than 11, I see little difference in our hardware or

I updated my 50-sound.conf so it now reads:

options snd snd-hda-intel index=1,0
options snd slots=snd-hda-intel
# u1Nb.6Vl+u16R_G6:8 Series/C220 Series Chipset High Definition Audio
alias snd-card-0 snd-hda-intel

and rebooted but it doesn't seem to have made any difference.

My ALSA information is located at

Hi Dave,

I also hit by this condition, different hardware though.
My laptop using i5 skylake and the sound is snd-soc-skl (the module is
loaded, I know it from lsmod. Actually there is also snd-hda-intel it
makes me confuse).
Installing 42.2 RC1 is a bit difficult without installing intel
firmware from the linux kernel git. Finally I use Tumbleweed, still I
have to install the firmware first.

The sound didn't work for the first time when I try to use YaST to
configure it. I modify /etc/modprobe.d/50-sound.conf become

options snd slots=snd-soc-skl
#ns1_.6zePz2w0JYE:Intel Corporation
alias snd-card-0 snd-soc-skl

It works now.


To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
To contact the owner, e-mail: opensuse+owner@xxxxxxxxxxxx

< Previous Next >