See $SUBJ - with mkinitrd, there was always a couple of lines listing which modules had been included. With dracut, I get what looks mostly like debug output, but no summary of what was built, see below. # mkinitrd -k vmlinuz-3.16.6-2-default -i initrd-3.16.6-2-default Creating initrd: /boot/initrd-3.16.6-2-default Executing: /usr/bin/dracut --logfile /var/log/YaST2/mkinitrd.log --force /boot/initrd-3.16.6-2-default 3.16.6-2-default dracut module 'plymouth' will not be installed, because command 'plymouthd' could not be found! dracut module 'plymouth' will not be installed, because command 'plymouth' could not be found! dracut module 'cifs' will not be installed, because command 'mount.cifs' could not be found! dracut module 'iscsi' will not be installed, because command 'iscsistart' could not be found! dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found! dracut module 'cifs' will not be installed, because command 'mount.cifs' could not be found! dracut module 'iscsi' will not be installed, because command 'iscsistart' could not be found! dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found! *** Including module: bash *** *** Including module: warpclock *** *** Including module: i18n *** *** Including module: network *** *** Including module: ifcfg *** *** Including module: kernel-modules *** Omitting driver i2o_scsi *** Including module: nfs *** *** Including module: rootfs-block *** *** Including module: terminfo *** *** Including module: udev-rules *** Skipping udev rule: 91-permissions.rules Skipping udev rule: 80-drivers-modprobe.rules *** Including module: systemd *** *** Including module: usrmount *** *** Including module: base *** *** Including module: fs-lib *** *** Including module: shutdown *** *** Including module: suse *** *** Including modules done *** *** Installing kernel module dependencies and firmware *** *** Installing kernel module dependencies and firmware done *** *** Resolving executable dependencies *** *** Resolving executable dependencies done*** *** Hardlinking files *** *** Hardlinking files done *** *** Stripping files *** *** Stripping files done *** *** Generating early-microcode cpio image *** *** Constructing GenuineIntel.bin **** *** Store current command line parameters *** Stored kernel commandline: root=nfs4:mirage:/home/airbus:rw,relatime,vers=4.0,rsize=1048576,wsize=1048576,namlen=255,hard,proto=tcp,port=0,timeo=600,retrans=2,sec=sys,clientaddr=192.168.2.146,local_lock=none,addr=192.168.2.151 ip=enp3s1f0:static *** Creating image file *** *** Creating image file done *** Update bootloader... -- Per Jessen, Zürich (5.0°C) http://www.dns24.ch/ - free dynamic DNS, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org