On 24/09/13 02:29, Per Jessen wrote:
Basil Chupin wrote:
On 23/09/13 23:34, Per Jessen wrote:
Basil Chupin wrote:
On 23/09/13 21:18, Per Jessen wrote:
Basil Chupin wrote:
On 23/09/13 18:37, Per Jessen wrote: > Or just change the network config to only use dhcpv4. No reboot > necessary, except to verify :-) Sorry Per - changing this requires a reboot. YaST tells me so and I am not about to argue with YaST :-) Funny, if I change this, it doesn't require a reboot. In fact, no network changes ever require a reboot. Eh, I get a message in YaST as soon as I untick the ip6 box that doing this change will require a reboot. This in both 12.3 and 13.1.
Well, that's not the change I proposed - I proposed you go and change the network config for the interface to only use dhcpv4. You speak in foreign tongue - I know not what you are talking about :-) .
Where in the bowls of oS am I to find this mysterious "dhcpv4" to be able to do unspeakable things to it? :-) Sorry - you go to Yast->Network devices - then edit the address assignment mode for the individual device(s). Usually you will have static, dhcpv4, dhcpv6 and 4+6. (all from memory, ymmv).
Thanks for this but the water is too cold and too deep so I'll stay in the boat where it is safe :-) . BC -- Using openSUSE 13.1, KDE 4.11.1 & kernel 3.11.1-3 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org