On Tue, 9 Apr 2013 15:50:17 -0300 Davi C. Rodrigues wrote: <snipped>
i) Everytime I log in, the systems forgets of my configuration on two monitors with different images. Hence, just after log in I have to go to "configure desktop" / "Display and Monitor" and change the configuration of the second monitor to "Position: Left of " instead of " Clone of". No matter if latter I select "Save as default" or not. <snipped>
Hi Davi, I had this problem and found the solution here (reply #5). The only caveats being a) you need to be running the proprietary nvidia software, not nouveau, and, b) including the package 'nvidia-settings'. Good luck!: https://forums.opensuse.org/english/get-technical-help-here/hardware/484292-... Re: Multiple monitors with DVI/HDMI/VGA 1. While on the desktop hit alt + F2 on your keyboard. 2. type kdesu nvidia-settings in the box in the middle top of your screen. 3. enter your password this will bring up the nvidia proprietary driver configuration utility. 4. Under "X Server Display Configuration" you will be able to properly set up your monitors including their position relative to one another. 5. After configuring your monitor setup, including dragging the monitors in the utility to their correct position, then hit apply. If your monitor setup is now correct then you must do the following: 6. Click "Save to X configuration File" enter "/etc/X11/xorg.conf" without the quotes. Click "save" and now your settings should be consistent across reboots. Carl -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org