2012. október 11. 19:45 napon Felix Miata <mrmazda@earthlink.net> írta: Felix, I compared the commands you suggested both in openSUSE 11.2 and openSUSE12.1 systems. In openSUSE 11.2 (where the display is set correctly) I get: # cat /etc/SuSE-release openSUSE 11.2 (i586) VERSION = 11.2 # lspci | grep VGA 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] # lsmod | sort | grep radeon # # head -n8 /var/log/Xorg.0.log X.Org X Server 1.6.5 Release Date: 2009-10-11 X Protocol Version 11, Revision 0 Build Operating System: openSUSE SUSE LINUX Current Operating System: Linux xx 2.6.37-desktop #1 SMP PREEMPT 2011-01-11 16:25:30 +0100 i686 Build Date: 23 September 2010 03:43:55PM # grep Chipset /var/log/Xorg.0.log (--) RADEON(0): Chipset: "ATI Radeon VE/7000 QY (AGP/PCI)" (ChipID = 0x5159) # grep 1600x /var/log/Xorg.0.log (**) RADEON(0): Option "PreferredMode" "1600x1200" (II) RADEON(0): Panel infos found from DDC detailed: 1600x1200 (II) RADEON(0): Output DVI-0 using initial mode 1600x1200 (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) In openSUSE 12.1 (where display is not configured correctly) I get: # cat /etc/SuSE-release openSUSE 12.1 (i586) VERSION = 12.1 CODENAME = Asparagus # lspci | grep VGA 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] # lsmod | sort | grep radeon # # head -n8 /var/log/Xorg.0.log [ 390.249] X.Org X Server 1.10.4 Release Date: 2011-08-19 [ 390.249] X Protocol Version 11, Revision 0 [ 390.249] Build Operating System: openSUSE SUSE LINUX [ 390.249] Current Operating System: Linux xx 3.1.10-1.16-desktop #1 SMP PREEMPT Wed Jun 27 05:21:40 UTC 2012 (d016078) i686 [ 390.249] Kernel command line: root=/dev/disk/by-id/xxx-part1 resume=/dev/disk/by-id/xxx-part5 splash=silent quiet vga=0x317 [ 390.255] Build Date: 10 November 2011 03:34:02PM # grep Chipset /var/log/Xorg.0.log [ 390.416] (--) RADEON(0): Chipset: "ATI Radeon VE/7000 QY (AGP/PCI)" (ChipID = 0x5159) # grep 1600x /var/log/Xorg.0.log [ 390.429] (**) RADEON(0): Option "PreferredMode" "1600x1200" [ 390.595] (II) RADEON(0): Panel infos found from DDC detailed: 1600x1200 [ 390.595] (II) RADEON(0): Not using mode "1600x1200" (mode clock too high) [ 404.729] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) [ 407.775] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) I guess this line explains: [ 390.595] (II) RADEON(0): Not using mode "1600x1200" (mode clock too high) But why 12.1 thinks that mode clock too high? Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org