Mailinglist Archive: opensuse (1306 mails)

< Previous Next >
[opensuse] 12.1 | KDE/Pulseaudio questions
  • From: Stefan Gofferje <stefan.gofferje@xxxxxx>
  • Date: Sat, 04 Feb 2012 05:07:55 +0200
  • Message-id: <2773953.6INxd0fUFT@enterprise>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi,

some time ago, I removed pulseaudio because it didn't let me use my soundcard
in analog/full duplex mode. Now I reinstalled it for testing and, well, full
duplex works but I have some other issues.

First of all, I don't see any device list in Phonon. Normally, there should be
a list of devices to priorize. But it looks like this:
http://i84.photobucket.com/albums/k26/sgofferj/screenshot10.png

I would like to have the priority list back... :)

Then I would like to know how I can make specific devices use specific
outputs. I use the Flightgear flightsim and with it comes a voice com program,
fgcom. It does accept parameters for input/output device and has a list
option. However, the list option only shows "default" for in and for out.
Ideally, I would like fgcom to use the front mic/front headset while the
general sound goes through the 7.1 rear connectors.

Any hints, anyone?

- -S

- -- Infos ---------------------------------------------------------------------
enterprise:~ # hwinfo --sound
19: PCI 14.2: 0403 Audio device
[Created at pci.319]
Unique ID: 5Dex.DTwrdue_pn8
SysFS ID: /devices/pci0000:00/0000:00:14.2
SysFS BusID: 0000:00:14.2
Hardware Class: sound
Model: "ATI SBx00 Azalia (Intel HDA)"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4383 "SBx00 Azalia (Intel HDA)"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x841b
Revision: 0x40
Driver: "snd_hda_intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xfcff4000-0xfcff7fff (rw,non-prefetchable)
IRQ: 16 (7845 events)
Module Alias: "pci:v00001002d00004383sv00001043sd0000841Bbc04sc03i00"
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=yes, avail=yes, need=no, active=unknown

31: PCI 100.1: 0403 Audio device
[Created at pci.319]
Unique ID: NXNs.y1jILTvHrVC
Parent ID: _Znp.UAx368lzOkB
SysFS ID: /devices/pci0000:00/0000:00:02.0/0000:01:00.1
SysFS BusID: 0000:01:00.1
Hardware Class: sound
Model: "nVidia Audio device"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x0e08
SubVendor: pci 0x1462 "Micro-Star International Co., Ltd."
SubDevice: pci 0x2630
Revision: 0xa1
Driver: "snd_hda_intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xfea7c000-0xfea7ffff (rw,non-prefetchable)
IRQ: 19 (72133 events)
Module Alias: "pci:v000010DEd00000E08sv00001462sd00002630bc04sc03i00"
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=yes, avail=yes, need=no, active=unknown
Attached to: #10 (PCI bridge)

enterprise:~ # aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0

- --
(o_ Stefan Gofferje | SCLT, MCP, CCSA
//\ Reg'd Linux User #247167 | VCP #2263
V_/_ Heckler & Koch - the original point and click interface
04:52am up 0:51, 4 users, load average: 0.44, 0.22, 0.19
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)

iEYEARECAAYFAk8soRAACgkQbQKZlCdPOMO+JwCgr4zxTI5hFwNBebiAM7gxdfpY
lIoAoJDsHhzYuWXbvrhTDdVdx1I8qtoG
=U+pc
-----END PGP SIGNATURE-----

--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
To contact the owner, e-mail: opensuse+owner@xxxxxxxxxxxx

< Previous Next >