Hi Philipp,
Thank you for your reply. I am attaching a SATA drive to the motherboard
which obviously shifts raw device naming as seen by grub.
With the system as is, obviously everything works fine. When I add a new SATA
device
to the motherboard, I am getting grub error 17.
device.map:
(hd0)
/dev/disk/by-id/ata-WDC_WD740ADFD-00NLR1_WD-WMANS1505822
(hd4)
/dev/disk/by-id/ata-INTEL_SSDSA2M080G2GN_CVPO9391018S080BGN
(hd3)
/dev/disk/by-id/ata-WDC_WD20EARS-00MVWB0_WD-WMAZ20081724
(hd1)
/dev/disk/by-id/ata-WDC_WD7500AAKS-00RBA0_WD-WCAPT0601614
(hd2) /dev/disk/by-id/ata-WDC_WD20EADS-00R6B0_WD-WCAVY0250778
menu.lst (relevant portion) :
###Don't change this comment - YaST2 identifier: Original name: linux###
title Desktop -- openSUSE 11.3 - 2.6.34.7-0.5
root (hd4,2)
kernel /vmlinuz-2.6.34.7-0.5-desktop
root=/dev/disk/by-id/ata-INTEL_SSDSA2M080G2GN_CVPO9391018S080BGN-part2
resume=/dev/disk/by-id/ata-WDC_WD740ADFD-00NLR1_WD-WMANS1505822-part2
splash=silent quiet showopts
vga=0x346
initrd /initrd-2.6.34.7-0.5-desktop
fstab (relevant portion):
/dev/disk/by-id/ata-INTEL_SSDSA2M080G2GN_CVPO9391018S080BGN-part2 /
reiserfs acl,user_xattr 1
1
/dev/disk/by-id/ata-INTEL_SSDSA2M080G2GN_CVPO9391018S080BGN-part3 /boot
reiserfs acl,user_xattr 1
2
I did not have this problem with 11.2 and 11.1 and seems new with 11.3.
Any ideas what I am missing?
Thanks,
Vahe
----- Original Message ----
From: Philipp Thomas
devices.map
Would you please post devices.map and fstab?
This does not work for me with 11.3 and I get a grub error (11 or 17 or 22 - I forget) whenever I add or remove a drive. This worked perfectly with 11.2! Did this change with 11.3 and am I forgetting something here?
And please also describe in detail what you are doing and the precise grub error you get. Philipp -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org